• Journal of the Korean Ceramic Society
• /
• v.37 no.9
• /
• pp.864-870
• /
• 2000

알루미나 단미의 기계적 성질을 향상시키고자, 185$0^{\circ}C$에서 1시간 동안 열간 가압소결에 의하여 SiC 입자 및 SiC 휘스커를 단독으로 혹은 동시에 첨가한 알루미나 복합재료를 제조하여 기계적 성질과 미세조직을 조사하였다. 20vol%의 SiC 입자 혹은 휘스커 첨가에 의하여, 알루미나 복합재료의 강도는 단미의 360 MPa에서 각각 640 MPa, 650 Mpa로 향상되었다. 20vol%의 SiC 입자 혹은 휘스커를 첨가한 복합재료의 파괴인성은 각각 3.5 MPa.m$^{1}$2/, 5.5 MPa.m$^{1}$2/를 나타내었다. 20vol%의 SiC 휘스커와 2vol%의 SiC 입자를 동시 첨가한 다중강화 복합재료의 강도와 파괴인성은 각각 790 MPa, 5.0 MPa.m$^{1}$2/ 로 증가하였다. 이와 같이 알루미나 단미에 비해 강도 및 파괴인성이 향상된 것은 입자에 의한 결정립 미세화 효과와 휘스커에 의한 균열편향, pull-out의 영향으로 생각된다.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 1998.03a
• /
• pp.71-75
• /
• 1998

This study deals with the friction weldability of A7075-T6 having high specific strength. The friction welding conditions used are rotation speed 2000rpm, friction pressure 40MPa, friction time 1.5sec, upset pressure 40~100MPa, upset time 5sec. First, upset length was measured by displacement transducer. The plastic flow in 7075-T6 weld generates convex lens shaped resion by friction and concave lens shaped resion by axial force. Under the condition of upset pressure 85MPa, the friction welds have tensile strength of 552MPa and shear strength of 262MPa.

• Magazine of the Korea Concrete Institute
• /
• v.24 no.3
• /
• pp.45-50
• /
• 2012

• The Journal of the Korea Contents Association
• /
• v.10 no.11
• /
• pp.228-234
• /
• 2010

Ni-Cr and Co-Cr alloy uncontained Be element for using as dental porcelain alloy were analyzed the mechanical properties through bonding strength and fracture test after the bonding with porcelain. The bonding strengths between alloy and ceramic were measured through the shear bond strength test. Consequently, the T-3 group contained Be element that had shear strength of 41.13(${\pm}5.11$)MPa was showed the highest shear strength than the other groups. The second highest group was a verabond contained Be element that had shear strength of 40.72(${\pm}5.98$)MPa. The results of the other groups according to the shear strength were Wirobond(38.40(${\pm}9.66$)MPa) belonged to Co-Cr alloy, and Verabond 2V(32.77(${\pm}4.31$)MPa), Bellabond N(28.63(${\pm}6.39$)MPa), Bellabond plus(24.97(${\pm}6.13$)MPa), Argeloy N.P. Star(22.69(${\pm}3.41$)MPa) uncontained Be element, respectively. The morphological aspects of the fracture surface between alloys and ceramic were observed that all groups were caused mixed failure as conformation attached ceramic fragments to metallic surface by fracture process.

• Fire Science and Engineering
• /
• v.24 no.6
• /
• pp.104-111
• /
• 2010

The strength of steel in a concrete filled steel tube (CFT) is reduced in a fire, but the concrete filled structurally ensures the fire resistance due to its high thermal capacity. This research analyzed the fire resistance performance due to the variances of concrete strength filled inside of steel tube and the load ratios, which can influence on the fire resistance of CFT. As $280{\times}280{\times}6$ CFT columns with the concrete strengths of 24 MPa and 40 MPa and the axial load ratios of 0.9, 0.6, and 0.2 in accordance with KS F 2257-1 and 7 were heated with loading to examine the fire resistance performance, the fire resistance used to 24 MPa concrete showed 27, 113, and 180 minutes according to the axial load ratios, 0.9, 0.6, and 0.2 respectively. In case of 40 MPa concrete, the fire resistance were turned out to be 19 and 28 minutes for the axial load ratios, 0.9 and 0.6 respectively. The results of fire resistance with 40 MPa concrete showed the much lower fire resistance performance than those of 24 MPa concrete. In case of 40 MPa, the fire resistance performance was not increased significantly according to the axial load ratio than that of 24 MPa. The main reason why the higher concrete strength showed lower fire resistance than that of lower guessed the internal stress had the concrete strength weak.

• Korean Journal of Food Science and Technology
• /
• v.30 no.3
• /
• pp.596-601
• /
• 1998

Effects of high hydrostatic pressure on microorganisms, pectin enzymes and texture of dongchimi (pickled radish roots) were investigated. Dongchimi was pressurized at $200{\sim}686\;MPa$ for 5 min when its pH reached to 4.0. Total aerobes, initial concentration of $4.05{\times}10^8\;CFU/mL$, were completely inactivated by high hydrostatic pressure at 600 MPa. Lactic acid bacteria, yeasts and molds, initial concentration of $3.25{\times}10^8\;CFU/mL\;and\;3.55{\times}10^4\;CFU/mL$, respectively, were completely inactivated by high hydrostatic pressure at 400 MPa. Leuconostoc mesenteroides appeared to be the most barotolerant lactic acid bacteria because it was the sole bacteria survived at 380 MPa. Pectinesterase (PE) and polygalacturonase (PG) activities increased after high hydrostatic pressure treatment. Residual PE activity was 193 after pressurization at 500 MPa, and residual PG activity was 191 after pressurization at 686 MPa when the initial enzyme activity of control was set to 100. The hardness of pressurized dongchimi was higher than control.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.18 no.4
• /
• pp.264-273
• /
• 2016

This study was conducted to find out the influence of water stress from May to June on photosynthesis, shoot growth and fruit quality of apple trees. Fuji'/M.9 apple trees were root pruned at full bloom (30th April), parallel to the row of 30 cm or 60 cm from the trunk, to one side or both sides of trunk. The average value of afternoon leaf water potential from May to June of the no root pruning was maintained over -1.80 MPa, but that of root-pruning treatments was maintained under -1.80 MPa. In the comparison of average value of leaf water potential from May to June by root-pruning degree, the root pruning both sides at 30 cm from trunk was lowest (-2.06 MPa), followed by the root pruning both sides at 60 cm (-2.02 MPa) and the root pruning one side at 30 cm (-1.91 MPa). Root pruning one side at 30 cm or both sides at 60 cm reduced photosynthetic rate from May to June by 80% or 65%, respectively, compared with no root pruning. So, the degree of decreasing total shoot length or average fruit weight compare to the no root pruning of the root pruning one side at 30 cm was 25% or 11%, respectively, and those of the root pruning both sides at 30 cm was 45% or 15%, respectively. However, the soluble solid content and fruit color of the root pruning was higher than those of the no root pruning, and those of the root pruning both sides was higher than root pruning one side. These results indicate that the fruit enlargement was decreased when the average value of average leaf water potential from May to June was under -1.80 MPa, and the shoot growth was decreased when that was under -2.00 MPa.

• KSBB Journal
• /
• v.23 no.5
• /
• pp.392-397
• /
• 2008

Recently, importance of immunosuppression is increasing as internal organ transplant becomes more prevalent with development of medical technology. Mycophenolic acid (MPA) is a selective inhibitor of guanine synthesis and it therefore has antibacterial, antiviral, antitumor and selective immunosuppressive activities. The objective of this study was to maximize MPA productivity through utilizing the MPA generating strain of Penicillium brevicompactum ATCC 16024, by inducing UV mutation and NTG mutation. The highest MPA obtained was 1.146 g/L, 2.051 g/L, and 1.390 g/L from P. brevicompactum UB-3, UB-9, UC-4 respectively mutants derived from UV treatment. P. brevicompactum NC-3 and NA-9 induced from NTG treatment yielded. 575 g/L, 2.238 g/L of MPA production respectively. Mutants capable of the highest observed production of MPA were P. brevicompactum UB-9 and P. brevicompactum NC-3 obtained using the UV and NTG treatments respectively.

• Journal of the Korean Society for Advanced Composite Structures
• /
• v.7 no.1
• /
• pp.25-31
• /
• 2016

Bond stress between cast-in-place ductile fiber reinforced cementitious composites and CFRP plank were experimentally analyzed. As failure shape, the mixture of failure between CFRP plank and epoxy, and failure between concrete and epoxy was shown. In case of RFCON from the suggested simple bond slip relationship, the maximum average bond stress was 5.39MPa, the initial slope was 104.09MPa/mm, and the total slip length was 0.19mm. PPCON showed the maximum average bond stress of 4.31MPa, the initial slope of 126.67MPa/mm, and the total slip length of 0.26mm, while RFCON+ appeared to have 8.71MPa, 137.69MPa/mm, 0.16mm. PPCON+ had 6.19MPa maximum average bond stress, 121.56MPa/mm initial slope, and 0.34mm total slip length. To comprehend the behavior of composite structure of FRP and concrete, local bond slip relation is necessary, and thus a simple relation is suggested to be easily applied on hybrid composite system.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2004.11a
• /
• pp.98-99
• /
• 2004

(1) Using high-frequency induction heating sintering and spark plasma sintering method, the densification of WC-Ni hard materials was accomplished using ultra fine power of Ni and WC. (2) Nearly fully dense WC-Ni could be obtained within 1 min. (3) Relative density and mechanical properties of WC-Ni obtained by HFIHS were high than those obtained by SPS. And WC grain size made by HFIHS was smaller than that made by SPS. (4) The fracture toughness and hardness values of WC-8Ni, WC-10Ni, and WC-12Ni made by HFIHS were $13MPa{\cdot}m^{1/2}\;and\;1950kg/mm^2,\;13.5Mpa{\cdot}m^{1/2}\;and\;1810kg/mm^2,\;14.4MPa{\cdot}m^{1/2}\;and\;1690kg/mm^2$, respectively for 60MPa and an induced current for 90% output of total capacity, 15KW. (5) The fracture toughness and hardness values of WC-8Ni, WC-10Ni, and WC-12Ni made by SPS were $12.2MPa{\cdot}m^{1/2}\;and\;1796kg/mm^2,\;12.9MPa{\cdot}m^{1/2}\;and\;1725kg/mm^2,\;13.6MPa{\cdot}m^{1/2}\;and\;1597kg/mm^2$, respectively for 60MPa and the electric current of 2500 A