• Journal of Electrical Engineering and Technology
• /
• 제10권2호
• /
• pp.529-538
• /
• 2015

Due to the high efficiency and compact mechanical structure, direct drive variable speed generators are used for power conversion in wind turbines. The wind energy conversion system (WECS) considered in this paper consists of a permanent magnet synchronous generator (PMSG), uncontrolled rectifier, dc-dc boost converter controlled with maximum power point tracking (MPPT) and adaptive hysteresis controlled voltage source inverter (VSI). For high utilization of the converter's power capability and stabilizing voltage and power flow, constant DC-link voltage is essential. Step and search MPPT algorithm which senses the rectified voltage ($V_{DC}$) alone and controls the same is used to effectively maximize the output power. The adaptive hysteresis band current control is characterized by fast dynamic response and constant switching frequency. With MPPT and adaptive hysteresis band current control in VSI, the DC link voltage is maintained constant under variable wind speeds and transient grid currents respectively.

• 한국태양에너지학회 논문집
• /
• 제28권5호
• /
• pp.85-95
• /
• 2008

Photovoltaic conditioning systems normally use a maximum power point tracking (MPPT) technique to deliver the highest possible power to the load continuously when variations occur in the insolation and temperature. A unique method of tracking the maximum power points (MPPs) and forcing the boost converter system to operate close to these points is presented through deriving small-signal model and transfer function of boost converter considering input capacitor. This paper aims at modeling boost converter including fairly large equivalent series resistance(ESR) of input reservoir capacitor by state-space-averaging method and PWM switch model. In the future, properly designed controller for compensation will be constructed in 3kw real system for maximum photovoltaic power tracking control.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2014년도 추계학술대회 논문집
• /
• pp.107-108
• /
• 2014

본 논문에서는 디커플링 회로가 포함된 PV-AC 모듈형 플라이백 인버터의 전류 센서리스(Sensorless) MPPT(Maximum power point tracking) 제어기법을 제안한다. 기존의 MPPT제어는 각 모듈의 입력단에 존재하는 전압과 전류 센서를 이용하여 최대 전력점을 추종하였다. 본 논문에서는 전력 변환장치의 저 가격화를 위해 MPPT 제어에 요구되는 전류 센서를 사용하지 않는 센서리스 MPPT 기법을 제안한다. 제안한 기법은 시뮬레이션과 실험을 통해 검증하였다.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제55권4호
• /
• pp.216-223
• /
• 2006

In this paper, a methodology for the efficiency improvement of the photovoltaic system without adding some elements or increasing the cost comparing with the conventional system is discussed. It is suggested the optimal photovoltaic module configuration through its performance analysis, and also the suitable maximum power point tracking (MPPT) voltage considered the system cost and the efficiency of the converter. The high efficiency photovoltaic system by using the parallel power transfer (PPT) based MPPT converter is proposed and analyzed theoretically comparing with the conventional Buck type MPPT converter. Finally, it is designed and implemented the proposed photovoltaic system for supplying DC 48V by using the PPT based MPPT converter. And the effect of the efficiency improvement and the usefulness of the proposed system is proved through some preliminary simulation and experiment results.

• 반도체디스플레이기술학회지
• /
• 제13권4호
• /
• pp.43-48
• /
• 2014

Two-level inverter has some disadvantages like high harmonics contained in the output current, efficiency limit and stress to switching device as IGBT and FET. Many researches have reported multi-level inverter to complement two-level inverter of problems. In this paper, we suggest MPPT algorithm of multi-string three-level solar inverter that considered nowadays. We added midpoint controller in order to implement the MPPT algorithm because the three-level inverter has to need midpoint controller and procured the stability of direct current link. We verify the superiority of multi-string T-Type inverter and the algorithm we suggested with solar irradiance variation experiment and MPPT efficiency measurement. The MPPT efficiency was confirmed with a high efficiency more than 99.97%.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 제38회 하계학술대회
• /
• pp.1116-1117
• /
• 2007

In this paper, the control method of maximum power point tracking (MPPT) using the duty ratio control of buck-type dc/dc converter is presented for seaflow generation system. The advantage of the proposed MPPT method is that characteristics of seaflow generator(SG) with respect to seaflow speed, required in the conventional MPPT method, are not needed. Also, due to using the SG output power as a control parameter, neither characteristics of the seaflow speed nor measurements of the rotational speed of the generator are required. Thus, there are advantages that seaflow generation system having features of lower cost and complexity, and higher reliability can be designed. In this paper, Seaflow generation system using the buck-type dc/dc converter is proposed and the effectiveness of the MPPT algorithm is confirmed by matlab simulink.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2018년도 전력전자학술대회
• /
• pp.370-371
• /
• 2018

Recently, interest in renewable energy is increasing due to energy depletion and environmental problems. Among them, solar energy is the most popular feature for its infinite, eco-friendly, easy to maintain and high utilization. In these solar power systems, solar cells have either a current-voltage characteristic curve or a power-voltage characteristic curve with non-linear properties. Therefore, the Maximum Power Point Tracking (MPPT) technique is important to control this. In this thesis, we will discuss MPPT techniques using a boost converter and demonstrate their behavior using the PSIM program. Also, the MPPT control algorithm for solar energy generation will be proposed.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2011년도 제42회 하계학술대회
• /
• pp.1390-1391
• /
• 2011

태양광 발전 시스템에서의 최대 전력점 추적(MPPT, Maximum Power Point Tracking)제어를 실험을 하기 위해 부분선형 다이오드 모델을 이용한 태블로 해석을 통해 태양광 발전 시스템의 태양전지 모듈의 특성을 시뮬레이션 하였다. 태양전지 모듈의 V-I 특성과 태양전지 패널을 직렬-병렬 어레이로 연결 시, 부분 그늘 문제(Partial Shading Problem)의 지역 최대 점(global peak)을 시뮬레이션을 통해 확인하였다.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2014년도 추계학술대회
• /
• pp.581-584
• /
• 2014

본 논문에서는 에너지 분배 기능을 이용하여 MPPT(Maximum Power Point Tracking) 제어 기능을 구현한 마이크로 빛에너지 하베스팅 시스템을 제안한다. 소형 PV(Photovoltaic) 셀에서 출력되는 에너지와 전압 레벨은 작기 때문에 직접 MPPT 제어회로를 구동하기 어렵다. 따라서 제안된 회로에서는 시동회로를 사용하여 Vcp를 MPPT 제어회로를 구동하기 위해 필요한 전압까지 승압시킨다. Vcp가 원하는 전압 값에 도달하면 전압감지기가 이를 감지하여 PV 셀로부터 시동회로에 공급되는 에너지는 차단하고, 전력변환기에 에너지를 공급한다. Vcp가 감소하여 MPPT 제어회로가 동작하기 어렵게 되면 전력변환기로의 에너지 전달을 차단하고 시동회로를 다시 구동한다. 이렇게 에너지 분배 기능을 이용하여 시동회로와 전력변환기를 번갈아 동작시키면서 에너지를 수확하여 PMU(Power Management Unit)를 통해 부하에 전달한다. 제안된 회로는 0.35um CMOS 공정으로 설계 되었으며 모의실험을 통해 동작을 검증하였다. 설계된 회로의 칩 면적은 패드를 포함하여 $1430um{\times}1110um$이다.

• 조명전기설비학회논문지
• /
• 제26권8호
• /
• pp.56-64
• /
• 2012

This paper proposes a novel maximum power point tracking (MPPT) control algorithm considering radiation to improve efficiency of PV system. The proposed algorithm is composed perturb and observe (PO) method and constant voltage (CV) method. PO method is simple to realize and CV method is possible to tracking MPP with low radiation. Response characteristics of proposed algorithm are compared to conventional MPPT algorithm such as PO method, IC method and CV method with radiation variation. This paper proves the validity of proposed algorithm through the analysis results.