• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2015년도 제46회 하계학술대회
• /
• pp.958-959
• /
• 2015

This paper proposes adaptive incremental conductance(A-IC) algorithm for maximum power point tracking(MPPT) control of photovoltaic. Conventional Perturbation & Observation(PO) and IC MPPT control algorithm generally uses fixed step size. A small fixed step size will cause the tracking speed to decrease and tracking accuracy of the MPP will decrease due to large fixed step size. Therefore, this paper proposes N-IC MPPT algorithm that adjust automatically step size according to operating conditions. To improve tracking speed and accuracy, when operating point is far from maximum power point(MPP), step size uses maximum value and when operating point is near from MPP, step size uses variable step size that adjust according to slope of P-V curve. The validity of MPPT algorithm proposed in this paper prove through compare with conventional IC MPPT algorithm.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제42회 동계 정기 학술대회 초록집
• /
• pp.430-430
• /
• 2012

Modulated pulsed power (MPP) 스퍼터링은 펄스 전압 shape, amplitude, duration의 modulation을 통해 증착율 손실을 극복하는 고출력 펄스 마그네트론 스퍼터링의 한 종류이다. Micro second 범위에서 on/off 시간을 다중 세트 형태로 자유롭게 프로그램 할 수 있어서 아킹 없이 고전류 영역의 마그네트론 동작을 할 수 있으므로, 고주파 유도 결합 플라즈마원이나 마이크로웨이브 투입 등의 부가적인 플라즈마 없이도 스퍼터링 재료의 이온화 정도를 획기적으로 높일 수 있는 장점을 가지고 있다. 본 연구에서는 $2{\times}1{\times}0.2$의 sputtering system에서 기판 캐리어를 이용해서 $400{\times}400mm$ 기판을 $272{\times}500mm$ 크기의 AZO target (Al 2 wt%)이 설치되어 있는 moving magnet cathode (MMC)을 이용하여 MPP로 증착했다. 두 종류의 micro pulse set을 하나의 macro pulse에 사용함으로서 weakly ionized plasma와 strongly ionized plasma를 만들 수 있다. 다양한 micro pulse set을 이용하여 평균 전력 2 kW에서 peak 전력을 4 kW에서 45 kW까지 상승 시킬 수 있으며, 이 때 타겟-기판 거리 80 mm에서 이온전류밀도는 $5mA/cm^2$에서 $20mA/cm^2$까지 상승했다. MPP는 같은 평균 전력에서 repetition frequency가 증가할 때, 증착 속도가 증가했으며, 같은 repetition frequency에서 macro pulse length가 증가할 때도, 증착 속도가 증가했다. 최적화된 marco, micro pulse set에서 증착 속도는 평균 전력 2 kW에서 110 nm/min이었고, 700 nm의 박막에서 비저항은 $1-2{\times}10^{-3}ohm{\cdot}cm$였다. 표면거칠기 Rrms는 약 3 nm였고, 400-700 nm 영역의 평균 투과도는 72-76%였다.

• Journal of Electrical Engineering and Technology
• /
• 제13권2호
• /
• pp.769-780
• /
• 2018

This paper presents an analysis of the power gain under partial shading conditions (PSC) when the partial shade loss is being compensated in photovoltaic(PV) system. To analyze the power gain, our study divides the mismatch loss into partial shade loss and operating point loss. Partial shade loss is defined as the power difference between a normal string and a partially shaded string at the maximum power point (MPP). Operating point loss is defined as the power loss due to the operating point shift while following the MPP of the PV array. Partial shading in a PV system affects the maximum power point tracking (MPPT) control by creating multiple MPPs, which causes mismatch losses. Several MPPT algorithms have been suggested to solve the multiple MPP problems. Among these, mismatch compensation algorithms require additional power to compensate for the mismatch loss; however, these algorithms do not consider the gain or loss between the input power required for compensation and the increased output power obtained after compensation. This paper analyzes the power gain resulting from the partial shade loss compensation under PSC, using the V-P curve of the PV system, and verifies that power gain existence by simulation and experiment.

• 한국표면공학회지
• /
• 제45권2호
• /
• pp.53-60
• /
• 2012

Modulated Pulse Power (MPP) magnetron sputtering is a new high-power pulsed magnetron sputtering (HPPMS) technology which overcomes the low deposition rate problem by modulating the pulse voltage shape, amplitude, and the duration. Highly ionized magnetron sputtering can be performed without arcing because it can be controlled as multiple steps of micro pulses within one overall pulse period in the range of 500-3,000 ${\mu}s$. In this study, the various waveforms of discharge voltage and current for micro pulse sets of MPP were investigated to find the possibility of controlling the strongly ionized plasma mode. Enhanced ionization of the sputtered metal atoms was obtained by OES. Large grained columnar structure can be grown by the strongly ionized plasma mode in the AZO deposition using MPP. In the most highly ionized deposition condition, the preferred orientation of (002) plane decreased, and the resistivity, therefore, increased by the plasma damage.

• 한국의학물리학회지:의학물리
• /
• 제32권4호
• /
• pp.122-129
• /
• 2021

Purpose: This study aimed to design a multipurpose dose verification phantom for external audits to secure safe and optimal radiation therapy. Methods: In this study, we used International Atomic Energy Agency (IAEA) LiF powder thermoluminescence dosimeter (TLD), which is generally used in the therapeutic radiation dose assurance project. The newly designed multipurpose phantom (MPP) consists of a container filled with water, a TLD holder, and two water-pressing covers. The size of the phantom was designed to be sufficient (30×30×30 cm³). The water container was filled with water and pressed with the cover for normal incidence to be fixed. The surface of the MPP was devised to maintain the same distance from the source at all times, even in the case of oblique incidence regardless of the water level. The MPP was irradiated with 6, 10, and 15 MV photon beams from Varian Linear Accelerator and measured by a 1.25 cm³ ionization chamber to get the correction factors. Monte Carlo (MC) simulation was also used to compare the measurements. Results: The result obtained by MC had a relatively high uncertainty of 1% at the dosimetry point, but it showed a correction factor value of 1.3% at the 5 cm point. The energy dependence was large at 6 MV and small at 15 MV. Various dosimetric parameters for external audits can be performed within an hour. Conclusions: The results allow an objective comparison of the quality assurance (QA) of individual hospitals. Therefore, this can be employed for external audits or QA systems in radiation therapy institutions.

• Advances in Energy Research
• /
• 제8권4호
• /
• pp.203-211
• /
• 2022

The aim of this paper is to analyze the performance of commercial fuel cell (rated capacity 1000W) with the help of resistive load and output power variation with change in H₂ flow rate and calculate the maximum power point (MPP) of the proton exchange membrane (PEM) while changing AC and DC load respectively. The factors influencing the output power of a fuel cell are hydrogen flow rate, cell temperature, and membrane water content. The results show that when the H₂ flow rate is changed from 11, 13, and 15 Lpm, MPP is increased from lower to higher flow rate. The power of the fuel cell is increased at the rate of 29% by increasing the flow rate from 11 to 15 lpm. This study will allow small-scale industries and residential buildings (in remote or inaccessible areas) to characterize the performance of PEMFC. Furthermore, fuel cell helps in reducing emission in the environment compared to fossil fuels. Also, fuel cells are ecofriendly as well as cost effective and can be the best alternative way to convert energy.

• 한국산학기술학회논문지
• /
• 제18권9호
• /
• pp.436-443
• /
• 2017

최근, 지구온난화 등의 문제로 인해 새로운 에너지 기술의 개발이 화제가 되고 있다. 중규모 이상의 출력을 얻도록 최적화된 태양광 및 태양열, 풍력 발전과 같은 신재생에너지 기술과 다르게 에너지 하베스팅기술은 출력전력이 매우 작아 크게 주목받지 못하고 있다. 하지만 최근 모바일 산업이 활성화 되면서 에너지 하베스팅기술의 활용가치가 재평가 받고 있다. 또한, 최대전력점 추적방식기술 역시 활발히 연구가 이루어지고 있다. 본 논문에서는 일정한 저항부하를 위한 열전모듈의 새로운 최대전력점추적 제어방식을 제안한다. 열전 모듈(이하 TEM: Thermoelectric Module)의 V-I곡선특성과 내부저항을 분석하고. 기존의 MPPT제어방식을 비교하였다. P&O(Perturbation and Observation)제어방식은 전압, 전류를 측정하기위한 센서 2개를 사용해야하기 때문에 CV제어방식보다 경제성이 떨어지지만 보다 정확히 MPP를 찾는다는 장점을 가진다. CV(Constant Voltage)제어방식은 전압센서 1개만 사용하기 때문에 경제적인 측면에서는 P&O제어방식보다 뛰어나지만, MPP가 정확히 못하다는 단점을 가지고 있다. 본 논문에서는 두 제어방식의 장점만을 가지고 TEM의 최대전력점(MPP)을 추적하도록 설계하였다. 제안된 MPPT 제어 방식은 PSIM 프로그램을 이용한 모의실험으로 확인하였으며, 하드웨어제작을 통해 제안된 MPPT제어 방식을 검증하였다.

• Asian-Australasian Journal of Animal Sciences
• /
• 제29권10호
• /
• pp.1416-1423
• /
• 2016

This study was designed to investigate the effect of grape pomace powder (GPP), mangosteen peel powder (MPP) and monensin on feed intake, nutrients digestibility, microorganisms, rumen fermentation characteristic, microbial protein synthesis and nitrogen balance in dairy steers. Four, rumen fistulated dairy steers with initial body weight (BW) of $220{\pm}15kg$ were randomly assigned according to a $4{\times}4$ Latin square design to receive four treatments. The treatments were as follows: T1 = control, T2 = supplementation with monensin at 33 mg/kg diet, T3 = supplementation with GPP at 2% of dry matter intake, and T4 = supplementation with MPP at 30 g/kg diet. The steers were offered the concentrate diet at 0.2% BW and 3% urea treated rice straw (UTRS) was fed ad libitum. It was found that GPP supplemented group had higher UTRS intake and nutrient digestibility in terms of neutral detergent fiber and acid detergent fiber than those in control group (p<0.05). Ammonia nitrogen ($NH_3-N$) and blood urea-nitrogen concentration were higher in monensin, GPP and MPP supplemented groups (p<0.05). Total volatile fatty acids and propionate in the GPP group were higher than those in the control group (p<0.05) while acetate concentration, and acetate to propionate ratio were decreased (p<0.01) when steers were supplemented with GPP, monensin, and MPP, respectively. Moreover, protozoal populations in GPP, MPP, and monensin supplementation were significantly lower than those in the control group (p<0.05), while cellulolytic bacterial population was significantly higher in the control group (p<0.05). Nitrogen retention, microbial crude protein and efficiency of microbial nitrogen synthesis were found significantly higher in steers that received GPP (p<0.05). Based on this study it could be concluded that the GPP has potential as an alternative feed supplement in concentrate diets which can result in improved rumen fermentation efficiency, digestibility and microbial protein synthesis in steers fed on treated rice straw.

• Clinical and Experimental Pediatrics
• /
• 제61권8호
• /
• pp.258-263
• /
• 2018

Purpose: Macrolide-resistant Mycoplasma pneumoniae pneumonia (MPP) is characterized by prolonged fever and radiological progression despite macrolide treatment. Few studies have examined serum procalcitonin (PCT) level in children with MPP. We aimed to investigate the association of acute inflammation markers including PCT with clinical parameters in children with MPP. Methods: A total of 147 children were recruited. The diagnosis of MPP relied on serial measurement of IgM antibody against mycoplasma and/or polymerase chain reaction. We evaluated the relationships between C-reactive protein (CRP), PCT, and lactate dehydrogenase (LDH) levels and white blood cell (WBC) counts, and clinical severity of the disease. We used multivariate logistic regression analysis to estimate the odds ratio for prolonged fever (>3 days after admission) and hospital stay (> 6 days), comparing quintiles 2-5 of the PCT levels with the lowest quintile. Results: The serum PCT and CRP levels were higher in children with fever and hospital stay than in those with fever lasting ${\leq}3days$ after admission and hospital stay ${\leq}6days$. CRP level was higher in segmental/lobar pneumonia than in bronchopneumonia. The LDH level and WBC counts were higher in children with fever lasting for >3 days before compared to those with fever lasting for ${\leq}3days$. The highest quintile of PCT levels was associated with a significantly higher risk of prolonged fever and/or hospital stay than the lowest quintile. Conclusion: Serum PCT and CRP levels on admission day were associated with persistent fever and longer hospitalization in children with MPP.

• 한국포장학회지
• /
• 제23권3호
• /
• pp.151-162
• /
• 2017

본 연구의 목적은 세절된 생울금의 포장방법에 따른 저장기간 중 품질변화를 관찰하고자 수행되어졌다. 세절된 생울금은 가스배출밸브(DVP), 이산화탄소 흡수제(CAP), 미세천공필름(MPP) 등을 적용한 포장방법을 이용하여 포장되어졌으며 $4^{\circ}C$와 $23^{\circ}C$에서 15일간 각각 저장하면서 품질의 변화를 관찰하였다. 이때 생울금의 품질변화 관찰을 위한 지표로써 중량감소, CIE $L^*a^*b$ 색차와, 포장내부의 가스조성변화, 커큐민 함량, 세절 생울금의 경도 등을 조사하였다. DVP는 생울금의 호흡에 의해 발생한 이산화탄소의 외부배출에 효과적이지 못하였다. 또한 MPP는 생성된 가스의 외부배출에는 적절하였으나 천공된 구멍으로 외부의 산소가 다량 유입되어 빠른 갈변현상과 짓무름 현상이 발생하였다. 내부에 생성된 탄산가스의 제거를 위해 이산화탄소 흡수제가 봉입된 CAP는 갈변과 생성된 이산화탄소에 의한 포장의 팽창 현상의 억제 및 중량감소를 최소화할 수 있는 포장방법으로 가장 효과적인 것으로 확인되었다.