• Journal of Sensor Science and Technology
• /
• v.13 no.2
• /
• pp.152-156
• /
• 2004

The dielectric and piezoelectric properties of 0.36Pb($Sc_{1/2}Nb_{1/2}$)$O_{3}$-0.25Pb($Ni_{1/3}Nb_{2/3}$)$O_{3}$-0.39Pb$TiO_{3}$ (hereafter PSNNT) at the morphotropic phase boundary (MPB) composition were investigated with $0{\sim}2.5$ mot% $MnO_{2}$ doping. Bulk density, dielectric loss and tetragonality of crystal structure were all improved with increasing $MnO_{2}$ additive content. With increasing $MnO_{2}$ additive content, the electromechanical coupling factor and quality factor were also increased: Electromechanical coupling $k_{p}$ and quality factor $Q_{m}$ at 2.0 mol% $MnO_{2}$ doping with were showed highest values of 55.6 % and 252, respectively.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1994.11a
• /
• pp.13-16
• /
• 1994

In this paper, xPb(Zn$_{1/3}Nb_{2/3}$)$O_3$-yPbTiO$_3$-zPbZrO$_3$-(0.5wt%)MnO$_2$ ceramics were fabricated by the mixed oxide method sintered at $1250^{\circ}C$ for 2[hr] and then the deielectric, electromechanical coupling factor($K_{p}$ and mechanical coupling factor(Qm) properties were investigated. In 0.1PZN-0.45PT-0.45PZsample, dielectric properties and electromechanical coupling factor were 829 and 29%. In the case of 0.5PZN-0.45PT-0.50PZ sample, that was 101 according to mechanical quality facotr. molphotropic phase boundary(MPB) certained area which $PbTiO_3$addition quatity 40∼50[㏖%].

• Journal of the korean society of oceanography
• /
• v.39 no.2
• /
• pp.136-147
• /
• 2004

Different model formulations in available models were compared with Microplankton-Detritus (MPB) model, and well documented FDM and ERSEM models were the candidate for these comparison. Different formulations in both candidate models were expressed in terms of MPD parameterization. Even though there are differences in the control of autotroph growth among models, it was found that some of the more important microplankton parameters expressed incomparable terms have broadly similar values in all the models. However, an important difference was proved to be the direct contribution of microheterotrophs to the Detritus compartment in FDM and ERSEM, whereas in MPD microplankton biomass passes to Detritus only by way of mesozooplankton grazing.

• Proceedings of the KIEE Conference
• /
• 1987.11a
• /
• pp.220-223
• /
• 1987

In this paper, electro-optic characteristics of PLZT 7.6/70/30 composition in MPB regions, which antiferroelectric and ferroelectric phases coexist together, were studied. As sintering times are increased, Curie temperatures ore linearly decreased. And the antiferroelectric phase becomes more stronger when Curie temperatures are decreased. The crystal structure investigated by lie of X-ray analysis is proved to cubic in the thermally depoled specimen and rhombohedral in the poled specimen. Accordingly, the applicability of 7.6/70/30 specimen as image storage and display device is expected by the method for applying field induced reversible transitions between antiferroelectric(AFE) and ferroelectric(FE) phase.

• Journal of the Korean Ceramic Society
• /
• v.26 no.4
• /
• pp.568-574
• /
• 1989

Effect of PbO addition on sintering and piezoelectric properties at 0.45Pb(Ni1/3Nb2/3)O3-0.40PbTiO3-0.15PbZrO3 composition which is tetragonal phase was investigated. In this composition, Porosity and dielectric constant were increased with excess PbO addition, but Kp and d31 was not changed. These variation of physical properties could be interpreted as composition change of solid grains from tetragonal to MPB region due to amount of PbO-rich liquid changing.

• Journal of the Korean Ceramic Society
• /
• v.33 no.1
• /
• pp.49-55
• /
• 1996

The aim of this study is to investigate the change of bending strength and fatigue strength in the unpoled and poled Pb(Zr, Ti)O3 ferroelectrics of tetragonal morphotropic phase boundary (MPM) and rhombohedral com-position in terms of internal stress which is measured by XRD method. Before poling treatment the highest bending strength was found in rhombohedral composition. After poling treatment the bending strength decreas-ed in all compositions but it decreased most remarkably in tetragonal composition. The most prominent de-crease of bending strength after poling treatment in tetragonal was attributed to the occurrence of microcracks due to highanisotropic internal stress around grain boundary which was induced of bending strength after poling in MPB and rhombohedral composition was not due to the occurrence of microcracks but to the increase in tensile internal stress perpendicular to the direction of crack propagation by domain alignment. Fatigue strength was higher before poling treatment than after poling treatment for various compositions.

• Korean Journal of Materials Research
• /
• v.8 no.2
• /
• pp.95-98
• /
• 1998

완화형 강유전체인 0.9MPb*Mg$_{1}$3/Nb$_{2}$3/)O$_{3}$-0.1PbTiO$_{3}$에서 강유전-상유전 상전이에 수반되는 relaxation거동을 살펴보기위해 낮은 전계에서 측정된 유전특성과 높은 전계에서 측정된 전계유기 분극 거동 등을 조사하였다. -50-9$0^{\circ}C$의 상전이 온도범위에 걸쳐 1V/mm의 낮은 전계에서 측정된 유전특성의 온도의존성을 구하고 수 kVmm의 강전계하에서 발생된 분극의 온도의존성을 관찰하였다. 이 모든 결과들은 Vogel-Fulcher관계식에 비교적 정확하게 일치되었으며 그 결과 T$_{f}$ 는 294.6˚K로 나타났다. 본 연구결과를 통하여 Vogel-Fulcher관계식에 의한 주파수 의존성은 낮은 전계하에서의 유전특성 뿐 아니라 강전계하에서의 여러물성들도 동일하게 적용되는 것을 확인할 수 있었다.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1999.05a
• /
• pp.638-641
• /
• 1999

In consideration of Dielectric loss and Temperature stability, 3-element system dopped with NiO, $Cr_2O_3$, well-known as Hardner and Stabilizer whose primary element is PZT was eximanated its structure, Temperature Coefficient of Capacitor, relative resistivity for Temperature Compensation condensor study. dopping with Nio, $Cr_2O_3$, Temperature Characteristic is developed, Dielectric loss largely represented useful1 small values in specimens dopped with NiO 0.2wt%, and specimence sintered at $110^{\circ}C$ dopped with $Cr_2O_3$, 0.1wt% also relative resistivity largely showed tendency of decrement According to dopping NiO more.

• Proceedings of the KIEE Conference
• /
• 2004.11a
• /
• pp.220-222
• /
• 2004

The piezoelectric ceramics for a step-up piezoelectric transformer are desired large electromechanical coupling factor, high mechanical quality factor and good characteristic resonance frequency. In this study, the empirical formula of specimens is used $0.9Pb(Zr_xTi_{1-x})O_3-0.1Pb(Mn_{1/3}Nb_{1/3}Sb_{1/3})O_3$ (PZT-PMNS). The piezoelectric and dielectric characteristic are investigated by sintering temperature and value of x as functions of $Ti^{2+}$, $Zi^{2+}$ mol rate. MPB(morphotropic phase boundary) is defined in the x=0.522. Because it is appeared to the best piezoelectric and dielectric characteristic in the x=0.522, it can be application of step-up transformer.

• Journal of Mushroom
• /
• v.13 no.1
• /
• pp.50-55
• /
• 2015

Glucan has been shown to have a significant role in the activation of the immune system, including increased activity of macrophages and so on. Sparassis latifolia (formerly S. crispa) is an edible mushroom abundant in dietary fiber and widely known to contain high levels of ${\beta}$-glucan. In the present study, fermentation broths containing soluble ${\beta}$-glucan were prepared by fermentation with mushrooms with four Lactobacillus species (L. plantarum subsp. Plantarum, L. acidophilus, L. helveticus, and L. delbrueckii subsp. Bulgaricus). After culturing four Lactobacillus spp. in MRS broth, each Lactobacillus was inoculated into MRS broth containing S. latifolia powder 5% (w/v) at $37^{\circ}C$ in an anaerobic incubator for five days. It showed that the ${\beta}$-glucan contents were different in each fermentation sample. The suitable conditions for the preparation of mushroom fermentation broths were investigated and discussed.