• Nuclear Engineering and Technology
• /
• 제34권5호
• /
• pp.482-493
• /
• 2002

The MOX fuel for LWR is fabricated either by direct mechanical blending of UO$_2$ and PuO$_2$ or by two stage mixing. Hence Pu-rich particles, whose Pu concentrations are higher than pellet average one and whose size distribution depends on a specific fabrication method, are inevitably dispersed in MOX pellet. Due to the inhomogeneous microstructure of MOX fuel, the thermal conductivity of LWR MOX fuel scatters from 80 to 100 % of UO$_2$ fuel. This paper describes a mechanistic thermal conductivity model for MOX fuel by considering this inhomogeneous microstructure and presents an explanation for the wide scattering of measured MOX fuel＇s thermal conductivity. The developed model has been incorporated into a KAERI＇s fuel performance code, COSMOS, and then evaluated using the measured in-pile data for MOX fuel. The database used for verification consists of homogeneous MOX fuel at beginning-of-life and inhomogeneous MOX fuel at high turnup. The COSMOS code predicts the thermal behavior of MOX fuel well except for the irradiation test accompanying substantial fission gas release. The over-prediction with substantial fission gas release seems to suggest the need for the introduction of a recovery factor to a term that considers the burnup effect on thermal conductivity.

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 1995년도 춘계학술발표회논문집(2)
• /
• pp.1087-1092
• /
• 1995

MOX 연료는 PWR, BWR, FBR 및 ATR 등과 같은 다양한 노형에서 이용이 가능하다. 이와 같은 MOX 연료는 이미 일부 국가에서 이들 노형에 이용하고 있으며, FBR의 상용화 시기가 다소 지연될 것으로 예상되어 이 분야에 대찬 연구는 더욱 활발히 진행될 전망이다. 여기에서는 이와 같은 현실을 감안하여 MOX 연료를 이용하는 MOX 연료주기와 우라늄 연료만을 이용하는 우라늄 연료주기에 대한 핵연료주기비를 비교·분석하였고, 그 결과 MOX 연료주기와 우라늄 연료주기의 경제성은 거의 대둥한 것으로 평가되었다. 또한 우라늄 가격, 사용후핵연료 처분시기, 처분 비용/재처리비용 등의 주요 변수에 대한 민감도분석을 수행한 결과, MOX 연료주기가 우라늄연료주기에 대해 상당한 경쟁력을 가지고 있는 것으로 분석되었다.

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 1997년도 춘계학술발표회논문집(1)
• /
• pp.45-50
• /
• 1997

The conventional MOX fuel shows adverse controllability in view of its neutronic characteristics such as decreased soluble boron worth and effective delayed-neutron fraction compared to the UO$_2$ fuel. In order to mitigate these disadvantages, we devised a new concept of the hybrid UO$_2$-MOX fuel pellet with dual structure such that its outer annular section contains. UO$_2$ fuel and its inner cylindrical bar contains MOX fuel. The lattice physics code HELIOS was used to evaluate the neutronic characteristics of three different types of fuel pellets ; UO$_2$ fuel pellet, MOX fuel pellet, and hybrid UO$_2$-MOX fuel pellet. Results show that the hybrid UO$_2$-MOX fuel pellet generally has intermediate neutronic tendency between UO$_2$ fuel and MOX which could diminish the problems arising from the use of the conventional MOX fuel.

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 1999년도 추계학술발표회요약집
• /
• pp.247-247
• /
• 1999

This paper describes a new mechanistic thermal conductivity model considering the heterogeneous microstructure of MOX fuel. Even though the thermal conductivities of MOX have been investigated numerously by experimental measurements and theoretical analyses, they show the large scattering making the performance analysis of MOX fuel difficult. Therefore, a thermal conductivity model that depends on the heterogeneous microstructure of MOX fuel has been developed by using a general two-phase thermal conductivity model. In order to apply this model for developing the thermal conductivity for heterogeneous MOX fuel, the fuel is assumed to consist of Purich particles and U02 matrix including Pu02 in solid solution. Since little relevant data on Purich particles is available, FIGARO and SiemensKWU results are only used to characterize the microstructure of unirradiated and irradiated fuel. Philliponneaus and HALDEN models are selected for the local thermal conductivities for Purich particles and matrix, respectively. Then by combining the two models, overall thermal conductivity of MOX fuel is obtained. The new proposed model estimates the MOX thermal conductivity about 10% less than the value of U02 fuel, which is in the range of MOX thermal conductivity from HALDEN. The developed thermal conductivity model has been incorporated into KAERIs fuel performance code, COSMOS, and then verified using the measured data in the FIGARO program. Comparison of predicted and measured temperatures shows the reasonable agreement within acceptable error bounds together with satisfactory results for the fission gas release and gap pressure.essure.

• Nuclear Engineering and Technology
• /
• 제52권4호
• /
• pp.689-699
• /
• 2020

In this work, new multi-recycling options of TRU nuclides using PWR fuel assemblies comprised of MOX and FCM (Fully Ceramic Micro Encapsulated) fuels are suggested and neutronically analyzed. These options do not use a fully recycling of TRU but a partial recycling where TRUs from MOX fuels are recycled while the ones from FCM fuels are not recycled due to their high consumption rate resulted from high burnup. In particular, additional external TRU feed in MOX fuels for each cycle was considered to significantly increase the TRU consumption rate and the finally selected option is to use external TRU and enriched uranium feed as a makeup for the heavy metal consumption in MOX fuels. This hybrid external feeding of TRU and enriched uranium in MOX fuel was shown to be very effective in significantly increasing TRU consumption rate, maintaining long cycle length, and achieving negative void reactivity worth during recycling.

• 원자력산업
• /
• 제5권12호통권34호
• /
• pp.78-83
• /
• 1985

플루토늄을 산화물의 형태로 우라늄 산화물과 혼합하면 혼합산화물(Mixed Oxide : MOX)연료가 된다. MOX연료는 고속로용으로 개발되고 있으나 고속로가 본격적으로 도입될 때 까지는 열중성자로용으로 이용되고 있다. 고속로와 열중성자로에서는 연료의 사용 조건이 크게 다르기 때문에 MOX연료의 설계도 이에 따라 많은 차이가 있다.

• Nuclear Engineering and Technology
• /
• 제37권4호
• /
• pp.317-326
• /
• 2005

The burning-out of excess plutonium from the reprocessing of spent nuclear fuel and from the dismantlement of nuclear weapons is recently emphasized due to the difficulties in securing the final repository for the spent fuel and the necessity to consume the ex-weapons plutonium. An irradiation test in the Halden reactor was launched by the OECD Halden Reactor Project (HRP) to investigate the in-pile behavior of plutonium-embedded fuel as a form of mixed oxide (MOX) and of inert matrix fuel (IMF). The first cycle of irradiation was successfully accomplished with good integrity of test fuel rods and without any undesirable fault of instrumentations. The test results revealed that the MOX fuel is more stable under irradiation environments than IMF. In addition, MOX fuel shows lower thermal resistance due to its better thermal conductivity than IMF. The on-line measured in-pile performance data of attrition milled MOX fuel are used in the analysis of the in-pile performance of the fuel with the fuel performance code, COSMOS. The COSMOS code has been developed for the analysis of MOX fuel as well as $UO_2$ fuel up to high burnup and showed good capability to analyze the in-reactor behavior of MOX fuel even with different instrumentation.

• 한국식품영양과학회지
• /
• 제46권7호
• /
• pp.896-902
• /
• 2017

본 연구는 감귤 콤부차의 산업화를 위한 발효 균주 표준화를 위하여 콤부차에서 분리된 3가지 균주(Gluconacetobacter xylinus, Gluconacetobacter medellinensis, Gluconobacter oxydans)를 이용한 감귤 발효액(CK-MOX)의 기능적 특성을 탐색하고자 하였다. CK-MOX 제조 후 15일간 3일 마다 샘플링을 하였으며, 발효 기간에 따른 pH, 산도, 항산화 능력을 평가하였다. 발효에 따라 pH는 감소하였고, 산도는 증가하였다. DPPH, ABTS 라디칼 소거능, ORAC assay를 통한 항산화 능력 측정 결과 발효에 따라 항산화 능력이 향상하는 것으로 나타났으며, 방광암 세포주(EJ 세포)의 생존 억제 및 이동 억제 효과가 있는 것으로 나타났다. 특히 CK-MOX로 유도된 EJ 세포의 사멸에 MAPK pathway의 중추적인 역할을 하는 것으로 알려진 ERK의 발현이 깊이 관여하는 것으로 나타났다.

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 1999년도 추계학술발표회요약집
• /
• pp.248.1-248
• /
• 1999

Preliminary analysis of in-reactor thermal performance of three MOX fuel rods, which are going to be irradiated in the Halden reactor beginning in the first Quarter of the year 2000 under the framework of the OECD Halden Reactor Programme, have been conducted by using the computer code COSMOS to ensure their safe operation. Parametric studies have been carried out to investigate the effect of uncertainties on in-reactor behavior by considering the four kinds of uncertainties; thermal conductivity, linear power, manufacturing parameters, and model constants. The analysis shows that, in the case of annular MOX -1 fuel, calculation results for thermal performance vary widely depending on the selection of model constants for fission gas release (FGR). On the contrary, the thermal performance of solid MOX - 3 fuel does not depend on the choice of FGR constants to a large extent as MOX-I, because the fuel temperature is very high in the MOX-3 irrespective of the choice of FGR constants and hence the capacity of grain boundaries to retain gas atoms is not large enough to accommodate the number of gas atoms reaching the grain boundaries. It is planned that when the data on microstructure and thermal conductivity for each type of MOX fuel are available, new analysis will be made using these information. In addition, FGR model constants will be derived from the measured fuel centerline temperature, rod internal pressure and other related data.

• Nuclear Engineering and Technology
• /
• 제52권6호
• /
• pp.1156-1163
• /
• 2020

Fuel temperature coefficient (FTC) of PuO₂+ZrO₂ (ROX) fueled LWR cell is analyzed neutronically with reactor- and weapons-grade plutonium fuels in comparison with a U-free PuO₂+ThO₂ (TOX), and a conventional MOX fuel cells. The FTC value of a ROX fueled LWR is smaller compared to a TOX or a MOX fueled LWRs and becomes extremely positive especially, at EOL. This is because when fuel temperature is increased, thermal neutron spectrum is shifted to harder, which is extreme at EOL in ROX fuel than that in TOX and MOX fuels. Consequently at EOL, ²³⁹Pu and ²⁴¹Pu contributes to positive fuel temperature reactivity (FTR) in ROX fuel, while they have negative contribution in TOX and MOX fuels. The FTC problem of ROX fuel is mitigated by additive ThO₂, UO₂ or Er₂O₃. In ROX-additive fuel, the atomic density of fissile Pu becomes more than additive free ROX fuel especially at EOL, which is the main cause to improve the FTC problem. The density of fissile Pu is more effective to decrease the thermal spectrum shifts with increase the fuel temperature than additive ThO₂, UO₂ or Er₂O₃ in ROX fuel.