• 대한디지털의료영상학회논문지
• /
• 제16권1호
• /
• pp.13-19
• /
• 2014

Purpose: FLAIR image is beneficial for the diagnosis of various bran diseases including ischemic CVS, brain tumors and infections. However the border between the legion of brain metastasis and surrounding edema may not be clear. Therefore, this study aims to investigate the practical benefits of delayed imaging by comparing the image from a patient with brain metastasis before a contrast enhancement and the image 10 minutes after a contrast enhancement. Materials and methods: Of the 92 people who underwent MRI brain metastases in suspected patients 13 people in three patients there is no video to target the 37 people confirmed cases, and motion artifacts brain metastases in our hospital June-December 2013, 18 people measurement position except for the three incorrect patient (male: 11 people, female: 7 people, average age: 60 years) in the target, test equipment, 3.0T MR System (ACHIEVA Release, Philips, I was 8ChannelSENSE Head Coil use Best, and the Netherlands). TR 11000 ms, TE 125 ms, TI2800 ms, Slice Thickness 5 mm, gap 5 mm, is a Slice number 21, the parameters of the 3D FFE, T2 FLAIR variable that was used to test, TR 8.1 ms, TE 3.7 ms, Slice number 240 I set to. The experiment was conducted by acquiring the FLAIR prior to contrast enhancement (heretofore referred to as Pre FLAIR), and acquiring the 3D FFE CE five minutes after the contrast enhancement, and recomposing the images in an axial plane of S/T 3mm, G 0mm (heretofore referred to as MPR TRA CE). Using the FLAIR 10 minutes after the contrast enhancement (heretofore referred to as Post FLAIR) and Pi-View, a retrospective study was conducted. Using MRIcro on the image of a patient confirmed for his diagnosis, the images before and after the contrast media, as well as the CNR and SNR of the MPR TRA CE images of the lesion and the site absent of lesion were compared and analyzed using a one-way analysis of variance. Results: CNR for Pre FLAIR and Post FLAIR were 34.35 and 60.13, respectively, with MPR TRA CE at 23.77 showing no significant difference (p<0.050). Post-experiment analysis shows a difference between Pre FLAIR and Post FLAIR in terms of CNR (p<0.050), but no difference in CNR between Post FLAIR and MPR TRA CE (p>0.050), indicating that the contrast media had an effect only on Pre FLAIR and Post FLAIR. The SNR for the normal site Pre FLAIR was 106.43, and for the lesion site 140.79. Post FLAIR for the normal site was 107.79, and for the lesion site 167.91. MPR TRA CE for the normal site was 140.23 and for the lesion site 183.19, showing significant difference (p<0.050), and post-experiment analysis shows that there was a difference in SNR only on the lesion sites for Pre FLAIR and Post FLAIR (p<0.050). There was no difference in SNR between the normal site and lesion site for Post FLAIR and MPR TRA CE, indicating no effect from the contrast media (p>0.050). Conclusions: This experiment shows that Post FLAIR has a higher contrast than Pre FLAIR, and a higher SNR for lesions, It was not not statistically significant and MPR TRA CE but CNR came out high. Inspection of post-contrast which is used in a high magnetic field is frequently used images of 3D T1 but, since the signal of the contrast medium and the blood flow is included, this method can be diagnostic accuracy is reduced, it is believed that when used in combination with Post FLAIR, and that can provide video information added to the diagnosis of brain metastases.

• Journal of Biosystems Engineering
• /
• 제4권1호
• /
• pp.1-23
• /
• 1979

The use of barley seeder attached to rotary tiller in the rural area has a significant meaning not only for the solution of labor peak season, but also for the increase of land utilization efficiency. The facts that presently being used barley seeders are all based on the mechanical principles of the reverse rotation, center drive and are all using forward rotating tine, which is used to be easily and heavily worn out when it rotates reversely, raise problem of recommending them to rural area in Korea. Therefore, the main objective of the study was to develop new type of rotary tine attachable to barley seeders. To attain the objective the following approaches were applied. (1) The kinematic analysis of reverse rotating barley seeders. (2) The studies on the soil bin and artificial soil. (3) The comparative experiment on the power requirement of prototype tine. The results obtained from the studies are summarized as follow: 1. The kinematic analysis of barley seeder attached to rotary tiller: The following results were obtained from the kinematic analysis for deriving general formulae of the motion and velocity characterizing the rotary tine of barley seeders presently being used by farmers. a) The position vector (P) of edge point (P) in the rotary tine of reverse rotating, center drive was obtained by the following formula. $$P=(vt+Rcos wt)i+Rsin wt j+ \{ Rcos \theta r sin \alpha cos (wt- \beta +\theta r) +Rsin \theta r sin \alpha sin (wt-\beta + \theta r) \} lk $$ b) The velocity of edge point $(P^')$ of reverse rotating, center drive rotary tine was obtained by the following formula. $$(P^')=(V-wR sin wt)i+(w\cdot Rcoswt)j + \{ -w\cdot Rcos \theta r\cdot sin \alpha \cdot sin (wt-\beta +\theta r) + w\cdot Rsin \theta r\cdot sin \alpha \cdot cos (wt- \beta + \theta r \} k $$ c) In order to reduce the power requirement of rotary tine, the angle between holder and edge point was desired to be reduced. d) In order to reduce the power requirement, the edge point of rotary tine should be moved from the angle at the begining of cutting to center line of machine, and the additional cutting width should be also reduced. 2. The studies on the soil bin and artificial soil: In order to measure the power requirement of various cutting tines under the same physical condition of soil, the indoor experiments Viere conducted by filling soil bin with artificially made soil similar to the common paddy soil and the results were as follows: a) When the rolling frequencies$(x)$ of the artificial soil were increased, the densIty$(Y)$ was also increased as follows: $$y=1.073200 +0.070780x - 0.002263x^2 (g/cm^3)$$ b) The absolute hardness $(Y)$ of soil had following relationship with the rolling frequencies$(x)$ and were increased as the rolling frequencies were increased. $$Y=37.74 - \frac {0.64 + 0.17x-0. 0054x^2} {(3.36-0.17x + 0.0054x^2)^3} (kg/cm^3)$$ c) The density of soil had significant effect on the cohesion and angle of internal friction of soil. For instance, the soil with density of 1.6 to 1.75 had equivalent density of sandy loam soil with 29.5% of natural soil moisture content. d) The coefficient of kinetiic friction of iron plate on artificial soil was 0.31 to 0.41 and was comparable with that of the natural soil. e) When the pulling speed of soil bin was the 2nd forward speed of power tiller, the rpm of driving shaft of rotary was similar to that of power tiller, soil bin apparatus is indicating the good indoor tester. 3. The comparative experiment on the power requirement of prototype tine of reverse rotating rotary: According to the preliminary test of rotary tine developed with various degrees of angle between holder and edge pcint due to the kinematic analysis, comparative test between prototype rotary tine with $30 ^\circ $ and $10 ^\circ$ of it and presently being used rotary tine was carried out 2nd the results were as follows: a) The total cutting torque was low when the angle between holder and edge point was reduced. b) $\theta r$ (angle between holder and edge point) of rotary tine seemed to be one: of the factors maximizing the increase of torque. c) As the angle between holder and edge point ($\theta r$) of rotary tine was $30 ^\circ $ rather than $45 ^\circ $, the angle of rotation during cutting soil was reduced and the total cutting torque was accordingly reduced about 10%, and the reduction efficiency of total cutting torque was low when the angle between holder and edge point ($\theta r$) of rotary tine was $10 ^\circ $, which indicates that the proper angle between holder and edge point of rotary tine should be larger than $10 ^\circ $ and smaller than $30 ^\circ $ . From above results, it could be concluded that the use of the prototype rotary tine which reduced the angle between holder and edge point to $30 ^\circ $, insted of $45 ^\circ $, is disirable not only decreasing the power requirements, but also increasing the durabie hour of it. Also forward researches are needed, WIlich determine the optimum tilted angle of rotary brocket, and rearrangement of the rotary tine on the rotary boss.

• Journal of Biosystems Engineering
• /
• 제1권1호
• /
• pp.1-6
• /
• 1976

This paper is the third one of the study on balanced type oscillating mole-drainer, the first one was presented in No 9. Gyeongsang College Report and the second one in Vol. 17, No.4 of the KSAE. In the first part of this study, the characteristics of traction forces between the nonoscillating earth working equipments and oscillating ones was compared. A model of the balanced type oscillating mole-drainer, which composed of a mechanism that may reduce the machine vibration, was designed following the dimensional analysis and similitude technique. The model test was carried out to clarify the balancing mechanism of the oscillating parts and other parts of the machine. In the light of the results from the model tests, a prototype machine was made for experimental purpose. Results from the field test by a reported in the near future. In the second report, the model tests were carried out under the same soil conditions, i.e, . oscillating frequency, running velocity, and oscillating amplitude, etc. It was clear that use of balanced type oscillating model could substantially reduce the vibration of the whole system of the machine, when compared with the nonoscillating type model. In this paper(the third report), results of investigation on the traction force, power requirement, and moment. etc, is presented. Analysis of variance technique was used for analyzing the effect of the frequency, amplitude, and running velocity on the draft force, torque, power requirements, and moments. The results obtained from the model tests are as follows, 1) By practicing a balanced-type oscillating mole-drainer, it was possible to reduce the traction resistance by 55.1-61. 2 percent of traction resistance, however, was 1.75 - 1.95 times greater than the value of resistance which was induced by use of a mole-drainer with single bullet. The resistance of rear shank against soil was considered as a main causing factor of the above results. 2) As the oscillation frequency was increased, the traction resistance was decreased. Considering on the effect of oscillation the greater the amplitude, and the slower the running velocity was, the greater the reduction ratio of traction resistance was. 3) The ratio of the traction resistance of oscillating mole-drainer to that of non-oscillating one could be represented as a function of dimensionless variable (V/$Af$). The results from the tests were well agreed with the reported results from the experim ents on oscillation plow or hoe. 4) By taking a lower value of (V/$Af$), reducing the traction resistance was possible. This fact meant, however, that the efficiency of mole drain practice would be lower. 5) It was experimentally confirmed under the same condition of soil that the variable (R/$rD1^3$) could be represented as a function of a variable($V^2/gD$) when a non\ulcornerocillating mole-drainer was used. 6) When a oscillating mole-drainer was used, the variable(R/$rD_1^{3}$) could be represented as a function of two variables ($v^2/gD_1$) and (V^2/gD_1$). 7) The torque was not affected by a change of frequency. However, a relation of proportionality existed between torque and amplitude, running velocity, and ratio of bullet diameter. When a balanced type oscillating mole-drainer with two bullets was used, torque was increased by 52.8-78. 4 percent and total power requirement was also increased. 8) Total power requirement was increased linearly in accordance with the increasing frequency, 41.96 percent of total power was used for oscillating action. The magnitude of total power requirement was 1. 8-9. 4 times greater than that of a non-oscillating mechanism. In the view point of power requirement, it was not advisable to increase the frequency, amplitude, running velocity, and ratio of bullet diameter at the same time. 9) Only the positive moment occured in the rear shank. Change of the diameter of a rear bullet, could not affect the balancing against the soil resistance. It was necessary for rear bullet to have a large resistance against soil only when the rear bullet was in backward motion. 10) Within an extent of the experimental base, optimum limits for several design factors were A=0.5cm, $f$=22.5Hz, V=O. 05m/sec, and $\lambda$=1.0 By adapting these values traction resistance was reduced by 40 percent and vibration acceleration wa s reduced by 60 percent. Even though the total , power requirements for operating a balanced type oscillation mechanism was greater ~than that of non-oscillating one, using a oscillating mechanism would be more effective. Because a balanced type oscillating mechanism is used, tractive resistance will be reduced and then the lighter . tractive equipment could be used.

• 한국초등수학교육학회지
• /
• 제9권2호
• /
• pp.85-110
• /
• 2005

시각적 표현은 문제해결을 이끄는 안내자의 역할을 수행하며, 문제해결의 결정적 단서를 제공하는 유용한 도구이다. 수학과 교수-학습에서 교사는 시각적 표현의 중요성을 강조하여야 하며, 아동은 문제상황에 대한 감각을 길러야 한다. 따라서 본 연구의 목적은 아동이 문제해결 과정에서 사용하는 시각적 표현의 특징을 분석하고 성공적으로 문제를 해결한 학생들의 표현 유형을 정리하여, 아동이 문제에서 제시하는 여러 가지 조건을 적절한 시각적 표현 방법으로 조직화하게 하는데 시사점을 주고자 하는데 있다. 이러한 연구 목적을 달성하기 위하여 아동의 문제해결지를 분석한 결과, 초등 수학 문제해결 과정에서 대부분의 아동은 다양한 방법으로 조건을 표현하는데 익숙하지 못하였으며 시행착오 단계를 거치지 않고 처음 선택한 전략을 끝까지 사용하는 경향을 보여 문제를 읽고 생긴 처음 이미지가 문제해결에 중요한 영향을 끼친다는 것을 알았다. 또한 성공적으로 문제를 해결한 아동은 계산식에 의존하기보다는 여러 가지 정보를 해결할 수 있는 형태로 표현하여 문제를 해결하였으며, 문제해결 과정을 직관적으로 파악할 수 있을 정도의 명료하고 조직화된 그림을 그린다는 것을 알 수 있었다.

• 대한의용생체공학회:의공학회지
• /
• 제25권5호
• /
• pp.421-430
• /
• 2004

임상적으로 의사가 청진기를 이용해 초기 혈전이 생긴 기계식 판막 음향신호의 변화를 구분하기는 쉽지 않다. 기계식 판막의 이상은 환자의 죽음을 의미하기 때문에 기계식 판막의 신뢰성과 초기 혈전 현상을 비관혈적으로 조기 진단하는 방법은 매우 중요하다. 이 논문은 컴퓨터 보조진단 시스템과 음향신호의 주파수 스펙트럼의 이동을 관찰하여 기계식 판막의 혈전 현상을 비관혈적으로 평가하는 것을 목적으로 한다. 혈전 모델은 상용화된 기계식 판막에 폴리우레세인과 실리콘을 이용하여 제작하였다. 판막의 표면에는 폴리우레세인을 코팅하고, 봉합링에는 실리콘을 코팅하였다. 봉합링의 주위에서 혈전이 발생하고, 20％, 40％, 60％로 자라나는 현상은 실리콘을 이용하여 제작하였다. 실험 시스템에서 판막의 음향 신호는 마이크로폰과 증폭기를 사용하여 측정하였고, 마이크로폰에는 주위잡음을 제거하기 위해 커플러를 장착하였다. 측정된 음향신호는 A/D 컨버터를 이용하여 샘플링하고, 스펙트럼을 분석하였다. 정상적인 판막과 혈전이 형성된 판막의 주파수 구분을 위해 인공신경망을 구성하였고, 연속적으로 판막의 운동 주기성을 확인하기 위하여 return map을 사용하였다. 생체 내 실험에서는 기계식 판막을 사용하는 순환장치를 장착한 동물과 기계식 판막을 치환 받은 지 1년 이내와 1년이 넘은 환자에게서 데이터를 채집하였다. 실험에서 얻은 데이터 스펙트럼은 두 가지 형태의 첨두치를 보였고, 이중에서 두 번째 첨두치는 혈전의 모델에 따라 변화를 보였다. 생체 내, 외 실험에서 얻은 데이터를 인공신경망에 적용한 결과 정상 판막과 혈전이 생성된 판막을 구분하였고, 환자를 대상으로 한 실험에서는 10명 중 1명이 두 번째 첨두치가 이동하는 결과를 보였지만 다른 방법으로 확인하지는 못했다. 본 논문의 결과는 기계식 판막의 혈전현상을 비침습적으로 조기 진단하고, 상태를 지속적으로 감시할 수 있는 기술적 토대를 제공할 것이다.

• 섬유기술과 산업
• /
• 제2권4호
• /
• pp.490-508
• /
• 1998

One of the latest fields of research in the area of output devices is tactual display devices [13,31]. These tactual or haptic devices allow the user to receive haptic feedback output from a variety of sources. This allows the user to actually feel virtual objects and manipulate them by touch. This is an emerging technology and will be instrumental in enhancing the realism of wearable augmented environments for certain applications. Tactual displays have previously been used for scientific visualization in virtual environments by chemists and engineers to improve perception and understanding of force fields and of world models populated with the impenetrable. In addition to tactual displays, the use of wearable audio displays that allow sound to be spatialized are being developed. With wearable computers, designers will soon be able to pair spatialized sound to virtual representations of objects when appropriate to make the wearable computer experience even more realistic to the user. Furthermore, as the number and complexity of wearable computing applications continues to grow, there will be increasing needs for systems that are faster, lighter, and have higher resolution displays. Better networking technology will also need to be developed to allow all users of wearable computers to have high bandwidth connections for real time information gathering and collaboration. In addition to the technology advances that make users need to wear computers in everyday life, there is also the desire to have users want to wear their computers. In order to do this, wearable computing needs to be unobtrusive and socially acceptable. By making wearables smaller and lighter, or actually embedding them in clothing, users can conceal them easily and wear them comfortably. The military is currently working on the development of the Personal Information Carrier (PIC) or digital dog tag. The PIC is a small electronic storage device containing medical information about the wearer. While old military dog tags contained only 5 lines of information, the digital tags may contain volumes of multi-media information including medical history, X-rays, and cardiograms. Using hand held devices in the field, medics would be able to call this information up in real time for better treatment. A fully functional transmittable device is still years off, but this technology once developed in the military, could be adapted tp civilian users and provide ant information, medical or otherwise, in a portable, not obstructive, and fashionable way. Another future device that could increase safety and well being of its users is the nose on-a-chip developed by the Oak Ridge National Lab in Tennessee. This tiny digital silicon chip about the size of a dime, is capable of 'smelling' natural gas leaks in stoves, heaters, and other appliances. It can also detect dangerous levels of carbon monoxide. This device can also be configured to notify the fire department when a leak is detected. This nose chip should be commercially available within 2 years, and is inexpensive, requires low power, and is very sensitive. Along with gas detection capabilities, this device may someday also be configured to detect smoke and other harmful gases. By embedding this chip into workers uniforms, name tags, etc., this could be a lifesaving computational accessory. In addition to the future safety technology soon to be available as accessories are devices that are for entertainment and security. The LCI computer group is developing a Smartpen, that electronically verifies a user's signature. With the increase in credit card use and the rise in forgeries, is the need for commercial industries to constantly verify signatures. This Smartpen writes like a normal pen but uses sensors to detect the motion of the pen as the user signs their name to authenticate the signature. This computational accessory should be available in 1999, and would bring increased peace of mind to consumers and vendors alike. In the entertainment domain, Panasonic is creating the first portable hand-held DVD player. This device weight less than 3 pounds and has a screen about 6' across. The color LCD has the same 16:9 aspect ratio of a cinema screen and supports a high resolution of 280,000 pixels and stereo sound. The player can play standard DVD movies and has a hour battery life for mobile use. To summarize, in this paper we presented concepts related to the design and use of wearable computers with extensions to smart spaces. For some time, researchers in telerobotics have used computer graphics to enhance remote scenes. Recent advances in augmented reality displays make it possible to enhance the user's local environment with 'information'. As shown in this paper, there are many application areas for this technology such as medicine, manufacturing, training, and recreation. Wearable computers allow a much closer association of information with the user. By embedding sensors in the wearable to allow it to see what the user sees, hear what the user hears, sense the user's physical state, and analyze what the user is typing, an intelligent agent may be able to analyze what the user is doing and try to predict the resources he will need next or in the near future. Using this information, the agent may download files, reserve communications bandwidth, post reminders, or automatically send updates to colleagues to help facilitate the user's daily interactions. This intelligent wearable computer would be able to act as a personal assistant, who is always around, knows the user's personal preferences and tastes, and tries to streamline interactions with the rest of the world.

• 구강회복응용과학지
• /
• 제30권2호
• /
• pp.121-130
• /
• 2014

목적: Reciprocating 파일인 WaveOne과 continuous rotary 파일인 ProTaper와 ProFile로 근관 형성시 상아질 벽의 표면성상과 상아질 삭편 크기와 도말층 제거 효과를 비교하였다. 연구 재료 및 방법: 60개 단근치를 ProFile, ProTaper, WaveOne으로 성형 후 근관이 보이도록 grinding 하였다. 근관 성형 동안 상아질 삭편을 모아 건조하였다. Scanning electron microscope으로 상아질 삭편 크기와 근관 표면의 불규칙성과 도말층을 관찰하였다. 결과: 표면 함요부의 범위는 ProFile, ProTaper 그리고 WaveOne에서 $150{\mu}m$, $70{\mu}m$, 그리고 $80{\mu}m$의 범위 내에서 관찰되었다. 상아질 삭편의 크기는 ProFile, ProTaper 그리고 WaveOne에서 $7{\mu}m$, $6.5{\mu}m$, 그리고$4{\mu}m$의 범위 내에서 관찰되었다. 도말층은 WaveOne의 중간 1/3과 근단 1/3에서 유의하게 더 많이 관찰되었다. 결론: WaveOne은 중간 1/3과 치근단 1/3의 도말층 제거 효과를 제외하고, ProFile과 ProTaper와 근관 표면 성상과 상아질 삭편에서 큰 차이가 없는 것으로 사료된다.

• 대한기관식도과학회:학술대회논문집
• /
• 대한기관식도과학회 1972년도 춘계종합 학술대회 초록집
• /
• pp.2.3-2
• /
• 1972

평형기능검사는 평형장애의 객관적인 소견을 찾으려는 것이며 평형장해의 양상을 분석하고 장해부위를 추정하여 장해의 원인을 구명하는데 그 목적을 두고 있다. 이중 전정척수반사는 미로로부터의 자극이 전신횡문근군 근긴장에 영향을 주어 안정시 또는 운동시의 체위변화에 관여하고 있는 데에 그 임상적 의의가 있다. 이 반사는 안진과 같은 전정안반사를 일으킬 수 없는 미로에 대한 미약한 자극에 의하여도 야기될 수 있으므로 평형기능의 기본검사로 시행되어야 한다. 저자들은 100명의 건장한 청년 남자에서 단각직위검사, 보행검사, 족답검사 및 차안서자법을 시행하여 다음과 같은 성적을 얻었다. 1. 단각직위검사 30초간의 접상회수는 우각거상는 5회 이내이었으며 평균 0.68회로 나타났다. 2. 보행검사 전달시의 편기는 100cm 이내에 분포되어 있었으며 평균편기치는 우측으로 22.5cm, 죄측으로는 26.1cm이었다. 후진시의 편기는 140cm 이내에 분포되어 있었으며 평균편기치는 좌측으로 35.4cm, 좌측으로는 330cm이었다. 3. 족답검사 정상두위에서는 전방이행이 93%, 후방이행이 5%이었으며 이행각의 방향은 우측 36%, 좌측 50%, 회전각의 방향은 우측 53%, 좌측 36%로 나타났다. 후경두위에서는 전방이행이 94%, 후방이행이 3%이었으며 이행각의 방향은 우측 34%, 좌측 55%, 회전각의 방향은 좌측 50%, 좌측 42%로 나타났다. 평균편기치는 정상두위에서는 이행각 22.05도, 이행거이 48.95cm, 회전각 24.40도, 후경두위에서는 이행각 29.22도, 이행거이 44.17cm, 회전각 39.58도로 나타났다. 4. 차안서자법 편서방향은 정두위, 후경두위, 우경두위, 좌경두위 등에 따라 약간의 차이가 있으나 좌측편서가 54~69%로 우측편서 24.40%보다 많으며 나머지에서는 3~7% 편서를 보이지 않았다. 편서각도는 좌우 각각 두위변화에 따라 0~16도 사이에 분포되어 있으며 정두위에서는 0~12도, 평균편서각도는 4.15~5.76도 사이에 분포를 보이었다.

• The Journal of Korean Physical Therapy
• /
• 제12권2호
• /
• pp.175-184
• /
• 2000

This study which applies to the 403 healthy people who don't have particular diseases recently(193 urban aged. 210 rural aged) among male and female aged over 60 years old living in Daegu(city) and Gyungbook(agricultural village) is fulfilled from November 1st to December 31st by interview using the questioned paper which researcher developed, and reached to these tallowing conclusions. 1. Every aged men independent of the place residence answered positively yes but aged women had weak assurance of their health. Especially $38.6\%$ of rural aged women said yes and $51.4\%$ of rural aged women said no. 2. In the sleep and well-regulated life, urban and rural aged generally marked on the sound sleep. Compared with male and female, men answered they had better sleep and regulated life than women. 3. The percentage of the urban and rural aged's judgement on their activity was high and the percentage of the rural aged was lower than the percentage of the urban aged. 4. While $62.6\%$ of urban aged answered they were active. $38.6\%$ of rural female aged answered yes, This shows that the rural female aged regard their health is not good. 5. Compared with same generation. urban aged ranked lower than urban aged in the confidence of physical strength. Especially rural need women answered $42.1\%$ of them were weaker than the same generation. This shows that rural aged women don't have confidence in general physical activities. 6. Taking exercises three times a week which can influence on health cue to sixties and seventies aged ranked $26.1\%$, rarely do is $18.8\%$ and never do is$28.8\%$. Urban and rural aged do not exercise on the purpose of health. 7. The reason of exercise was to advance the physical strength and quality of motion$(34.9\%)$ to get rid of stress$(13.4\%)$ and to prevention of adult illness$(27.8\%)$, prevention of fatness$(15.3\%)$. Aged have a correct understanding that exercise can promote health and protect from the diseases of adult people because the items about the diseases of adult people was marked high. 8. Among the subject of total investigation, 209 persons answered. It showed necessary to recognize that the exercise is still important essential part between adult illness and health care. 9. The $67.7\%$ of urban aged men answered yes in the question of undergoing a physical examination but the rate of not undergoing a physical examination was high in rural aged and urban aged women. According to this, there were the difference of consciousness about health between urban and rural aged. and men and women. 10. Among the people who haying undergone the physical examination, $80.3\%$ of the aged went back to the hospital again because of the result. 11. In the case of stroke, most aged answered the would be placed under medical care. but $53.9\%$ of rural aged women answered they would rely on Chinese medicine. According to this. aged preferred Chinese medicine in some particular diseases. 2. The $58.1\%$ of whole object of this study answered that stroke would be recovered.

• 대한정형외과스포츠의학회지
• /
• 제1권2호
• /
• pp.154-158
• /
• 2002

목적: 관혈적방법과관절경적방법을이용하여재발성견관절전방불안정환자를수술후추시결과를비교하고자하였다. 대상및방법: 1995년1월부터2000년4월까지관혈적및관절경적Bankart repair를시행하고1년이상추시가가능한68명을대상으로하였으며, 23명은관절경적방법으로45명은관혈적방법으로수술을시행하였다. 추시기간은12개월에서64개월로평균34개월이었다. 결과: 관혈적수술을시행한환자들중2예에서아탈구가발생하여보존적인방법으로치료하였으며관절경적그룹에서는2예에서탈구, 2예에서아탈구가발생하여이중탈구된1예에서관혈적방법으로재수술을시행하였다. Rowe 등에의한기능적평가에서는관혈적그룹에서평균87 점이었고관절경적그룹에서평균85점이었다. 환자의주관적인만족도는관혈적그룹에서84.6 점이었고관절경적그룹에서72.5점이었다. 두그룹간의결과의통계분석상안정성과운동범위점수이외에는통계학적으로유의한차이는없었다.결론: 관혈적수술방법은안정도가높았고, 관절경적수술방법은견관절운동범위에장점이있었다. 견관절재발성전방불안정환자의수술적치료에있어서이학적검사및방사선학적검사, 진단적관절경에의해적절한수술방법을선택하는것이환자의예후에중요한요소가될 것이다.