• Journal of the Korean Ceramic Society
• /
• v.35 no.10
• /
• pp.1085-1093
• /
• 1998

Amorphous alumina powder prepared by the fast calcination of aluminum trihydroxide(Al(OH)3 gibbsite) for 0.5 second at 580$^{\circ}C$ was investigated rehydration propeties. Phase composition crystal size and mor-phology surface area pore volume and pore size distribution of pesudo-boehmite and bayerite crystals changed with temperature time water/alumina ratio and particle size when amorphous alumina rehydrated with water. Phase compositions were examined with XRD and DTA and crystal sized morphologies were investigaed with SEM and TEM. Also rehydration properties of amorphous alumina were in-vestigated by measuring the surface area pore volume and pore size distribution.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.60 no.3
• /
• pp.648-653
• /
• 2011

We propose a new frequency offset estimation technique for multiband orthogonal frequency modulation (MB-OFDM) based ultra wideband (UWB) systems. The proposed frequency offset estimation technique is related to the scheme of Schmidl for channel model 1 (4-1Om NLOS, rms. delay =14.3ns.) using more than two symbols and with alternate symbols. Variance of frequency offset estimate obtained from the proposed frequency offset estimation technique approaches very nearing to Cramer Rao Lower Bound (CRLB) in an AWGN channel. BER performance of the proposed technique is also presented.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.58 no.5
• /
• pp.1035-1040
• /
• 2009

We propose a new encoder/decoders based on an tune able wavelength converter(TWC) and an arrayed waveguide grating(AWG) router for large capacity optical CDMA networks. The proposed encoder/decoder treats codewords of wavelength/time 2-D code simultaneously using the dynamic code allocation property of the TWC and the cyclic property of the AWG router, and multiple subscribers can share the encoder/decoder in networks. Feasibility of the structure of the proposed encoder/decoder for dynamic code allocation is tested through simulations using two wavelength/time 2-D codes, which are the generalized multi-wavelength prime code(GMWPC) and the generalized multi-wavelength Reed-Solomon code(GMWRSC). Test results show that the proposed encoder/decoder can increase the channel efficiency not only by increasing the number of simultaneous users without any multiple-access interference but by using a relatively short length CDMA codes.

• Proceedings of the KIEE Conference
• /
• 1999.07g
• /
• pp.3135-3137
• /
• 1999

We propose two robust blind equalization algorithms based on multi-stage clustering blind equalization algorithm, which are called a complex classification update algorithm(CCUA) and an error compensation algorithm(ECA). The first algorithm is a tap-updating algorithm which each computes classified real and imaginary parts in order to reduce computations and the complexity of implementation as a stage increase. The second one is a algorithm which can achieve faster convergence speed because error of equalizer input make always fixed. Test results confirm that the proposed algorithms with faster convergence and lower complexity outperforms both constant modulus algorithm (CMA) and conventional multi-stage blind clustering algorithm(MSA) in reducing the SER as well as the MSE at the equalizer output.

• Proceedings of the KIEE Conference
• /
• 1999.07g
• /
• pp.3138-3140
• /
• 1999

We propose a robust blind equalization algorithm based on dual-mode algorithm which incorporates a stop-and-go technique. The constant modulus algorithm(CMA) exhibits very slow convergence when applied to QAM signals and generates phase error. We show that convergence properties of the dual-mode MCMA can be significantly improved by simply adding a stop-and-go technique. To speed up the convergence rate, the TMA-MCMA operates in triple mode that is based on the dual-mode of the MCMA incorporated with the tap-updating control modes of the SGA.

• Journal of the Korea Furniture Society
• /
• v.13 no.2
• /
• pp.11-18
• /
• 2002

This study was carried out to investigate the strength and technical feasibility of glulam from small diameter Pinus densiflora and Larix kaempferi. Small diameter logs are currently not used in structural laminated beam construction, but it is suggested that its properties may be feasible for this purpose. The glulam combinations were designed with high grade laminae located at outer laminations (face) and low grade laminae located at center laminations. Important problems of finger jointed glulam as a structural beam are the small modulus of rupture (MOR). One solution for this problem Mi to use veneer and solid wood as the face laminae. The MOE values were predicted for each beam from laminae. The results showed that actual beam MOE values exceeded slightly the predicted values. Based on the evaluation and analysis of Pinus and Larix glulam, the maximum load of Larix kaempferi glulam indicated large values. The bending properties of A and E types glulam were superior to others. It is suggested that this small diameter log can be a candidate for structural glulam construction, providing the proper combinations of face laminae.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.58 no.11
• /
• pp.2286-2291
• /
• 2009

We propose a phase optimization technique for sidelobe suppression in OFDM system. The technique is based on idea that phase shift to some of the transmit symbols within the symbol constellation plane can lead to significant sidelobe suppression. The sidelobes are reduced by optimizing using iterative method the phases of some subcarriers on the left and right hand side of the used OFDM spectrum. The proposed technique requires a small amount of side information that needs to be transmitted. Simulation results show that the proposed technique can reduce the sidelobes by significant amount.

• Proceedings of the KIEE Conference
• /
• 2001.07d
• /
• pp.2678-2680
• /
• 2001

We develop a total solution system for applications, which is called a data processing module system(DPMS), based on ASP, PDF, JAVA, and MSSQL. The DPMS system provides a realtime telematic guidance in the fields of application, recruiting, and management. The user documents the PDF file on the Web browser and store the file in DB for correction. The DPMS discovered the difficulties in data input due to 2 byte problem of Korean language. This result leads to the usage of Korean language as well as others. Test results through free-charge access confirm that the DPMS outperforms the conventional systems based on ASP with HTML in view of simplicity and confidentiality.

• Journal of the Korean Wood Science and Technology
• /
• v.41 no.5
• /
• pp.392-398
• /
• 2013

This study investigated the effect of test zone selection for evaluating bending strength of visually graded lumber. This will contribute to the understanding of two different methods under different standards. In method I, the major defect was randomly placed in the test specimen. In method II, the major defect was randomly placed in the maximum moment zone (MMZ). The results showed that the method II is more accurate for reflecting the effect of defects governing the grade of lumber. Unless the maximum strength-reducing defect (MSRD) is placed in MMZ, the evaluated value would be higher than that of MSRD. For evaluating the modulus of rupture (MOR) of visually graded lumber in test set-up of Method I, the Eq. (5) needs to be considered.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.8 no.4
• /
• pp.127-138
• /
• 1998

최근의 공정한 정보 교환 프로토콜 연구에서는 중재자를 이용하지만 통신 쌍방 사이에 분쟁이 발생하는 경우에만 중재자가 개입하는 방법으로 중재자의 역할을 최소화시키고 있다. Mao는 공정한 정보 교환 프로토콜에 응용 가능한 검증가능 위탁 서명이라는 새로운 서명 개념을 제안하였다. 그러나, Mor 의 방식은 Staeler의 이산로그에 대한 검증가능 암호 기법을 이용하기 때문에 통신량과 계산복잡도가 매우 높다. 본 논문에서는 제곱근에 대한 검증가능 암호 기법을 이용한 검증가능 위탁 서명 방식을 제안하였다. 제안된 검증가능 위탁 서명 방식은 통신량이 적고 계산 효율성이 높은 장점이 있으나 위탁 기관을 단 하나밖에 허락하지 않는 단점이 있다. 또한, 본 논문에서는 제안된 검증가능 위탁 서명 방식의 응용으로 공정한 전자 계약프로토콜과 공정한 전자 등기 우편 프로토콜을 함께제안하였다.