• 한국신재생에너지학회:학술대회논문집
• /
• 2008.05a
• /
• pp.263-265
• /
• 2008

자원 재활용 및 에너지 생산관점에서 폐유지로부터 환경친화적인 연료인 바이오디젤에 대한 연구가 활발히 진행되고 있다. 특히 폐유지내 함유된 유리지방산 및 수분에 의해 효율적인 에스테르화 반응이 어렵기 때문에 이를 전처리 단계에서 제거되어야 한다. 본 연구에서는 폐유지내 유리지방산을 효과적으로 제거하기 위하여 회분식 반응기에서 제올라이트 촉매의 종류에 의한 세공구조와 산성도 변화에 따른 유리지방산 전환반응에 미치는 영향을 조사해 보았다. 제올라이트 촉매의 유리지방산 전환율은 세공구조와 산성도에 따라 큰 차이를 나타내었다. 유리지방산 전환율은 FAU < MOR < MFI < BEA의 순으로 높았다. 제올라이트의 세공구조는 1차원적인 구조를 가질 경우 탄소침적이 일어나지만 3차원적인 세공구조를 가지는 경우 탄소침적에 의한 촉매의 활성저하가 감소된다. 또한 제올라이트의 산성도에 따른 특성으로는 유리지방산의 전환반응에는 중간정도의 산세기를 가진 촉매가 유리함을 확인하였다. 그러므로 폐유지로부터 유리지방산을 제거하기 위한 우수한 제올라이트 촉매로는 BEA 제올라이트 촉매임을 확인하였다.

• Journal of the Korean Society for Precision Engineering
• /
• v.14 no.9
• /
• pp.80-89
• /
• 1997

Die sinking electrical discharge machining(EDM) was conducted for ceramic composite of 33 weight percent TiC based on AI$_{2}$O$_{3}$ ceramic matrix according to the change of current and duty factor(DF). Material removal rate(MRR) was increased as the current and the duty factor increased, but better surface mor-pholoty was obtained in the region of lower current and duty factor. From the scanning electron microscopy(SEM) photographs and the energy dispersive X-ray spectroscopy(EDX) of the EDMed surface, EDM trace formed by one discharge spark was analyzed. Although the bending strength after EDM was highly decreased, reliability obtained by weibull analysis was increased twice. The bending strength was recovered or more by barrel polishing after EDM. From the FEM analysis of temperature for one spark, the possible melting region of AI$_{2}$O$_{3}$and TiC was obtained.

• Journal of the Korean Wood Science and Technology
• /
• v.24 no.4
• /
• pp.7-14
• /
• 1996

두께가 20mm와 30mm이고 폭이 40mm와 60mm 인 길이 600mm의 낙엽송 제재목에 응력파 시험과 휨강도 시험을 실시하였다. 모든 시험편은 생재 상태로 구입 후 함수율 약 13%로 조습 처리하여 응력파 시험과 휨강도 시험을 시행하였다. 휨 영계수와 휨강도는 두께가 큰 것이 작게 나타났다. 최상의 상관관계는 휨 영계수와 양 표면에서 구한 값의 평균값을 사용한 응력파 속도 및 영계수 사이에 나타났다. 휨 영계수와 관계에서 응력파 영계수는 응역파 속도 보다 더 확연한 옹이의 영향을 보였다.

• Journal of the Korean Wood Science and Technology
• /
• v.19 no.3
• /
• pp.53-61
• /
• 1991

Mechanical properties of composite panel made with 3mm thick Apitong(Dipterocarpus grandiflorus) veneer on each face of particleboard core of 4 different specific gravity were determined. The results obtained were as follows: 1. Measured MOR and MOE increased with an increased in specific gravity of particleboard core. 2. Test results showed that the difference in bending properties between flatwise bending and edgewise bending was present. The average MOE value of flatwise loading was higer than that of epdgewise loading. But it was shown reverse tendency in MoR and MOE. 3. The delamination between face veneer and core particle was found in flatwise bending but nell in edgewise. 4. These composite panel could be substituted for plywood and other panel materials in furniture making as considered suitable allowable stress and bending strength.

• Proceedings of the KIEE Conference
• /
• 2008.11a
• /
• pp.360-362
• /
• 2008

Based on classification systems of power and IT standard dictionaries, scientific and technological standard, SPARK, power IT fields of IEC and organization units of corporations, we propose a new classification system for the standardization of power of terminologies. The classification system consists of a hierarchical structure with general classification, application fields and specific technologies while keeping the conventional matrix-type classification system. Interpretation work of the power of terminologies confirms that the proposed classification system is efficient.

• Proceedings of the KIEE Conference
• /
• 2007.11b
• /
• pp.118-120
• /
• 2007

Today power system technology is being converged with communication system technology or information technology (IT). This conversion action affects on two parts vigorously so that IT has become very essential in power industry. But terminologies of two parts are confused and it is necessary that these are standardized to develop the industry mush more because the standardization is the first step of preparation to FTA environments.

• Journal of the Korea Furniture Society
• /
• v.18 no.1
• /
• pp.20-30
• /
• 2007

This experiment was carried out to investigate the effects of number and location of finger joints on the bending strength of glue-laminated lumbers. Urea resin adhesives were used in this experiment and the resin content was 70% for cold pressing. The lamina were edge-jointed and end-jointed. The specimen were composed of one or three layers. The obtained results are summarized as follows; The effects of finger joints on the decrease of bending strength of glue laminated woods were different according to the number and location of finger joints. The decrease of MOR was highest on the middle position of laminated woods. The effects of several arrangements of finger joints on the bending strength of glue laminated woods showed on Figure 7 and 8. The variance of thickness-laminating on the bending strength of glue laminated woods were larger than those of width-laminating.

• Journal of the Korea Furniture Society
• /
• v.18 no.2
• /
• pp.106-110
• /
• 2007

This study was performed to find potentialities of the leaves of gingko tree (Gingko biloba L.) as a raw material for particleboard (PB) manufacturing. Various amounts of the leaves were mixed with wasted wood particles to manufacture PB. Physical and mechanical properties, such as density, internal bond (IB) strength, and modulus of rupture (MOR) of manufactured PB were not much different from those of the control board. Formaldehyde emission values decreased with increasing the amount of leaves. Especially, the formaldehyde emission of PB made with 5 percent of leaves was decreased to 1.31 mg/l, which is about 36% lower emission than that of the control. From these results, the leaves of gingko tree may be considered as an additive of lowering formaldehyde emission in a functional PB manufacturing process.

• Journal of the Korea Furniture Society
• /
• v.27 no.4
• /
• pp.302-308
• /
• 2016

It has been known that acetylation improves the dimensional stability of wood. Liquid phase acetylation is more popular than gas-phase acetylation for the effectiveness of weight gain of wood. In this study the specimens of domestic red and Korean pines are acetylated in liquid phase and their physical properties, such as density, bending strength, anti-hygroscopicity etc., are analyzed. Acetylation increases the average weights and volume of larch specimens by 11.4% and 3.4%, respectively, and their average oven-dry densities are increased by $0.03g/cm^3$. Acetylation does not influence on Modulus of Rupture (MOR) and Modulus of Elasticity (MOE). The average Percentage Reduction in Hygroscopicity (PRH) and average Percentage Reduction in Water soaking (PRW) of larch specimens are respectively 20.2% and 20.8%. Thus it can be concluded that acetylation improves the dimensional stability of larch specimens.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.58 no.8
• /
• pp.1633-1637
• /
• 2009

We propose a new technique for sidelobe suppression in orthogonal frequency division multiplexing (OFDM) systems. Sidelobe suppression is an essential technique to design OFDM based overlay system. The proposed technique is based on the combination of the multiple choice sequence (MCS) with the conventional windowing of OFDM signal in time domain. The MCS is choosing the one sequence which has lowest power in sidelobes from the produced set of sequences. The main advantage of proposed technique is that it fully utilizes the available bandwidth to transmit data. Simulation results show that by combining MCS with conventional windowing technique, the sidelobes in OFDM system can be significantly reduced