• Polymer(Korea)
• /
• v.38 no.6
• /
• pp.687-693
• /
• 2014

Poly(ether-block-amide) 1657 (PEBAX 1657) blended membranes with molecular weight 400 poly(ethylene glycol) (PEG 400) were prepared and their permeability was tested for the gases $N_2$, $O_2$, $CH_4$, $CO_2$, and $SO_2$ by the time-lag method. The permeation characteristics were investigated in terms of diffusivity and solubility, which are dominant factors for gas transport. With the addition of PEG 400, the permeability of all the gases increased and also the ideal selectivity for several pair gases was enhanced. In particular, selectivity for $CO_2/N_2$ ranged from 53.2 (pristine PEBAX 1657 membrane) to 84.1 (50% PEG 400 added), for $SO_2/CO_2$ from 38.9 to 50.7, and for $CO_2/CH_4$ from 17.7 to 31.4. The increase of both permeability and selectivity is mainly because of the increase of solubility of the gases, especially $CO_2$ and $SO_2$. To obtain durability against water vapor, glutaraldehyde (GA) was added to the PEBAX 1657/PEG 400 blended membranes. As a result, permeability decreased owing to a reduction of the free volume and ether oxide units, which are the main factors in elevating the permeability for the blended membranes, and selectivity decrease however; we believe that the durability of the resulting membranes would be increased.

• Polymer(Korea)
• /
• v.37 no.1
• /
• pp.80-85
• /
• 2013

Anionic polymerization of hexafluoropropylene oxide (HFPO) was investigated under various reaction conditions such as various hexafluoropropylene (HFP) oligomers composed of dimer and trimer, reaction temperatures, and feeding rates of hexafluoropropylene oxide monomer. HFP oligomer was synthesized from cesium fluoride (CsF) and HFP in tetraethyleneglycol dimethylether (TG). Under 5 g of CsF, 200 g of HFP, 10 g of TG, and reaction temperature $30^{\circ}C$, HFP dimer content in oligomer was relatively increased. HFPO oligomer with a high molecular weight ($M_w$ 3600) was synthesized in conditions of reaction temperature $0^{\circ}C$, HFP oligomer with 35.1% of dimer, and 1.85 g/min of HFPO feeding rate. Otherwise, chain transfer was increased under unoptimized reaction conditions. Consequently, it was found that reaction conditions impact chain propagation and chain transfer in the anionic polymerization of HFPO.

• Polymer(Korea)
• /
• v.37 no.4
• /
• pp.526-532
• /
• 2013

The effect of CNT dispersion method on rheological and electrical properties of polystyrene/carbon nanotube (PS/CNT) nanocomposites via latex technology was compared. The nanocomposites were prepared through freeze-drying the dispersed suspension comprised of CNTs and PS particles. In this study, physical dispersion method, either sodium dodecylsulfate (SDS) addition or polyvinyl pyrrolidone (PVP) wrapping, was employed to prevent the deterioration of intrinsic properties of CNT caused by chemical modification. The physical method applied to latex technology was very effective in CNT dispersion. With SDS addition, the enhancement of rheological properties was low compared to PVP wrapping because the properties of matrix were deteriorated due to the incorporation of low molecular weight SDS. The electrical percolation threshold of PS/SDS-stabilized CNT and PS/PVP-wrapped CNT nanocomposites was 0.23 and 0.90 wt%, respectively. The enhancement of electrical conductivity was low in the case of PVP wrapping because the non-conducting PVPs wrapped around CNT restricted the electrical connection between CNTs.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.39 no.1
• /
• pp.55-63
• /
• 2013

Applications of nano-emulsion for cosmetics as a means of promoting dermal absorption have been the subject of interest. In this study, the stability of nano-emulsions prepared by low-energy emulsification method and varying the composition of raw materials was investigated. By measuring the particle size of the nano-emulsion against time, the stability of nano-emulsions prepared by adding polyol to water phase was increased significantly compared with the nano-emulsions prepared by adding polyol to ethanol phase. The speed of adding ethanol phase to water phase did not have a significant impact on the particle size and stability. Depending on the type of oil, stability was not affected. However, there would be a correlation between the initial size of the nano-emulsion droplets and the molecular weight and polarity of the oil. Stability and the initial particle size according to the type of polyols showed a similar trend except 1,2 hexanediol. The initial droplet size was affected by the concentration of surfactant and oil. However, the initial droplet size did not change against time. Concentration of ethanol was observed to have a significant impact on the initial particle size and stability.

• Proceedings of the Ginseng society Conference
• /
• 1988.08a
• /
• pp.147-150
• /
• 1988

Polysaccharides which show reticuloendothelial system potentiating activity in carbon clearance tests have been examined in water extracts of Panx species. From the dried roots of P. notoginseng, an active polysaccharide called sanchinan-A was isolated. The molecular weight of sanchinan-A was estimated to be 1,500,000D and the structure was determined to be $\beta$-D-(1-3-galactan), possessing branch points at positions 0-6 at which (mainly-$\alpha$-L-arabinofuranosyl and partly $\beta$-D-galactopyranosyl)-(1-6)-$\beta$-D-galacto-pyranosyl-(1-3)-$\beta$-D-galactopyranosyl side chains are attached on average, to two of three galactosyl units. From dried rhizomes of P. japonicus, several active polysaccharides were also isolated, and these structuers were also determined. From the dried roots of P. ginseng, several polysaccharides which showed strong activity were isolated. The structures of these compounds are currently under investigation. The polysaccharide fraction (non-dialyzed fraction) of the water extract of red ginseng (steam-dried roots) did not exhibit activity, while the dialyzed fraction potentiated RES. Activity disappeared, however, during the process of separation due to the presence of a substance in the fraction which stabilizes an active substance.

• The Korean Journal of Zoology
• /
• v.28 no.1
• /
• pp.31-43
• /
• 1985

The $(Ca^{2+}+Mg^{2+})$-ATPase has been purified homogeneously from sarcoplasmic reticulum of rat skeletal muscle by sucrose density gradient centrifugation. The purified enzyme has a molecular weight of 115,000 as judged by polyacrylamide gel electrophoresis in the presence of sodium dedecyl sulfate, and therefore has the same size of the enzyme in rabbit and chick skeletal muscle. $Ca^{2+}, Mg^{2+}, Fe^{2+}, Co^{2+}, and Mn^{2+}$ at 50 $\\muM$ show stimulatory effect on the ATP-ase, while $Zn^{2+}, Cu^{2+}, and Hg^{2+}$ inhibit it at the same concentration. The ATPase activity is insensitive to antimalarial drugs such as quinine and quinacrine, but is sensitive to inhibition by p-hydroxymecurie benzoate and phenylmethylsulfonylfluoride. The enzyme has optimum pH of 6 to 7 and Km value for ATP is estimated to be 98 $\\muM$. Thus, a number of biochemical properties of this enzyme appear to be different from those of the enzyme that have been isolated from rabbit skeletal muscle. The $(Ca^{2+}+Mg^{2+})$-ATPase appears to be selectively degraded in microsomal fraction. The activity of metalloendoprotease is evident in the microsomal preparation when assayed by radioactively labeled protein substrate, such as $^{3}H-casein and $^{125}I$-insulin. However, it is presently unclear whether the metalloendoprotease is responsible for the degradation of the $(Ca^{2+}+Mg^{2+})$-ATPase.

• Journal of the Korean Vacuum Society
• /
• v.19 no.2
• /
• pp.81-90
• /
• 2010

We introduce a novel and versatile approach for preparing self-assembled nanoporous multilayered films with antireflective properties. Protonated polystyrene-block-poly (4-vinylpyrine) (PS-b-P4VP) and anionic polystyrene-block-poly (acrylic acid) (PS-b-PAA) block copolymer micelles (BCM) were used as building blocks for the layer-by-layer assembly of BCM multilayer films. BCM film growth is governed by electrostatic and hydrogen-bonding interactions between the oppositely BCMs. Both film porosity and film thickness are dependent upon the charge density of the micelles, with the porosity of the film controlled by the solution pH and the molecular weight (Mw) of the constituents. PS7K-b-P4VP28K/PS2K-b-PAA8K films prepared at pH 4 (for PS7K-b-P4VP28K) and pH 6 (for PS2K-b-PAA8K) are highly nanoporous and antireflective. In contrast, PS7K-b-P4VP28K/PS2K-b-PAA8K films assembled at pH 4/4 show a relatively dense surface morphology due to the decreased charge density of PS2K-b-PAA8K. Films formed from BCMs with increased PS block and decreased hydrophilic block (P4VP or PAA) size (e.g., PS36K-b-P4VP12K/PS16K-b-PAA4K at pH 4/4) were also nanoporous. Furthermore, we demonstrate that the nanostructured electrochemical sensors based on patterning methods show the electrochemical activities. Anionic poly(styrene sulfonate) (PSS) layers were selectively and uniformly deposited onto the catalase (CAT)-coated surface using the micro-contact printing method. The pH-induced charge reversal of catalase can provide the selective deposition of consecutive PE multilayers onto patterned PSS layers by causing the electrostatic repulsion between next PE layer and catalase. Based on this patterning method, the hybrid patterned multilayers composed of platinum nanoparticles (PtNP) and catalase were prepared and then their electrochemical properties were investigated from sensing $H_2O_2$ and NO gas. This study was based on the papers reported by our group. (J. Am. Chem. Soc. 128, 9935 (2006); Adv. Mater. 19, 4364 (2007); Electro. Mater. Lett. 3, 163 (2007)).

• Archives of Pharmacal Research
• /
• v.19 no.2
• /
• pp.116-121
• /
• 1996

Antisense oligonucleotides seem to provide a promising new tool for the therapy. Choi et al. (1995) reported antisense phosphorothioate oligonucleotides (PS-ODN, 25 mer) complementary to TGF-.betha. mRNA designed for scar formation inhibitor to eliminate scars, which was caused by undesired collagen deposition due to overexpression of TGF-.betha., in wounded skin. PS-ODN were evaluated in vitro for skin penetration using normal and tape-stripped damaged rat skin. The in vitro skin transports were carried out with partially modified PS-ODN (6S) and fully modified PS-ODN (25S). The cumulative amount of PS-ODN (6S) penetrated through normal rat skin was $0.234{\pm}0.041{\mu}g/cm^2$ and that of tape-stripped damaged rat skin was $1.077{\pm}0.301{\mu}g/cm^2$ over 8 hrs. PS-ODN (25S) can not be found in receptor medium through normal skin due to high molecular weight (Mol.Wt.=8,000) and polyanionic charge. However, the cumulative amount of PS-ODN (25S) penetrated across damaged rat skin in PBS was $0.340{\pm}0.296{\mu}g/cm^2$ over 8 hrs. The absense of dermis raised the cumulative amount of PS-ODN (6S) penetrated through rat skin. And the fluxes of PS-ODN (6S) and PSODN (25S) at 8hrs across damaged rat skin were $134.63{\pm}37.67{\mu}g/cm^2$ h, and $42.50{\pm}36.95ng/cm^2$ h, respectively. While PS-ODN (25S) was stable in 10% heat inactivated fetal bovine serum (FBS) during 24 hrs, PS-ODN (6S) was less stable than PS-ODN (25S), but was markedly stable than unmodified phosphodiester. It is suggested that the cumulative amount of PS-ODN (6S) penetrated through damaged rat skin is larger than that of PS-ODN (25S) since the former is easier to degrade by nuclease than the latter and then is apt to penetrate into skin. Thus, PS-ODN represents a logical candidate for further evaluation due to the potential for delivery into the wounded skin.

• Korean Journal of Food Science and Technology
• /
• v.37 no.5
• /
• pp.695-701
• /
• 2005

Efficient method was established for analysis of sulfur-containing compounds, including dimethyl disulfide, dimethyl trisulfide, 3-methyl thiophene, allyl mercaptan, 2-methyl-3-furanthiol, and methional. Sulfur-containing compounds were extracted through solid phase microextraction (SPME) or static headspace extraction (SH), and quantified using gas chromatograph equipped with pulsed flame photometric detector. All sulfur compounds, except ally mercaptan, showed higher detection response when dissolved in hexane than in dichloromethane. Linear range was $10^2-10^4$. Dimethyl trisulfide showed lowest limit of detection (LOD) value of 15.2 ppt, and methional highest of 70.5 ppb. Highest extraction efficiency for sulfur-containing compounds, particularly polar and small molecular weight compounds, was observed in 75mm carboxen/polydimethylsiloxane fiber, followed by 65mm polydimethylsiloxane/divinylbenzene and 100mm polydimethylsiloxane. Compared to SPME, less sulfur-containing compounds could be analyzed by SH, mainly due to its low extraction efficiency, although lower amount of artifacts were formed during sample preparation.

• Korean Journal of Food Science and Technology
• /
• v.32 no.1
• /
• pp.161-167
• /
• 2000

The protease produced by a newly isolated Aspergillus wentti from Korean traditional Meju was purified and characterized. The optimal medium composition and culture conditions for maximum protease production were ; bran :1% glucose solution =1 : 1, pH 9.0, $30^{\circ}C$, and 4 days of fermentation. Protease was purified by QAE-Sephadex, SP-Sephadex ion exchange chromatography and Sephadex G-100 chromatography. The specific activity and the purification fold of the purified enzyme were 213 unit/mg protein and 27.3, respectively. The molecular weight of purified protease was found to be 32 kDa by SDS-PAGE. Km and Vmax value's for hammastein milk casein were $3.049{\times}10^{-4}\;M\;and\;151.1\;{\mu}g/min$, respectively. Kinetic parameters showed that the enzyme has higher affinity to casein than isolated soybean protein, hemoglobin and bovine serum albumin. Optimal pH and temperature for reaction of the purified enzyme were 9.0 and $50^{\circ}C$, respectively. The enzyme was stable at pH 4.0-11.0, below $40^{\circ}C$, and the activity was not stimulated by metal ions. 1mM phenylmethylsulfonyl fluoride inhibited the enzyme activity by 98.5%. It means that the enzyme is one of serine protease.