• Journal of the Korean Society of Food Science and Nutrition
• /
• v.28 no.6
• /
• pp.1201-1207
• /
• 1999

To utilize the leaves of broccoli, the shape of which was similar with that of kale leaves, as a vegetable juice, the extracts from two types of vegetable leaves were subjected to the analyses of proximate com ponents, volatile sulfur compounds, vitamin C and minerals. The sensory evaluation of the juices, prepared from kale and broccoli leaves, were performed by duo trio test and scoring test. Among eight varieties of broccoli, four varieties('Pilgrim', 'Greenbelt', 'Salinas' and 'Shasta')were not significantly different from kale(p<0.05), based on the duo trio sensory test. Sulfur and nitrogen compounds present in the dichloromethane extracts of kale and broccoli leaves 'Pilgrim' were identified as 3 butenyl, allyl, butyl and 4 methylsulfinylbutyl isothiocyanate(sulforaphane), 4,5 epithiovalero, 4,5 epithio 3 hydroxyvalero, benzenepropane, 3 hydroxy 4 propene, 4 methylthio butane, 3 hydroxy 3 phenylpropane, 5 methy lsulfinylpentane, 4 methoxyphenyl 3 hydroxypropane nitrile and dimethyl trisulfide by GC/MSD analysis. Proximate components were observed to be relatively similar between kale and broccoli leaves. Vitamin C and sugar content were higher in broccoli leaves(125∼180mg% and 8∼12°Brix) than in kale(101mg% and 7oBrix). In mineral analysis by AA and ICP Mass, 'Pilgrim' showed a higher content of K, Fe, Mn, Zn and Se. In separate experiment, sensory scores of bitter taste and astringent taste were lower and scores of over all taste and over all acceptability, higher in broccoli('1243') juice than those in kale juice.

• Journal of Welding and Joining
• /
• v.27 no.4
• /
• pp.73-78
• /
• 2009

Characterization of the microweld CCFL electrode for the TFT-LCD backlight unit was carried out in terms of the glass beading heat treatment conditions. We evaluate the weld zone and parent metal of the microweld CCFL electrodes that were exposed to simulated glass beading heat treatment. The CCFL electrode was composed of the cup made with pure Ni, the pin made with pure Mo and the lead wire made with Ni-Mn alloy. Each part of the electrode was assembled together by micro spot welding process and then the assembled electrodes were exposed to simulated glass beading temperatures of $700^{\circ}C,\;750^{\circ}C$ and $800^{\circ}C$. The microstructures of the microweld CCFL electrode were observed by using optical microscope, scanning electron microscope and EDS. Micro-tensile and microhardness test were also carried out. The results indicated that the grain coarsening in the HAZs(heat affected zones) for both the cup-pin weld and pin-lead wire were exhibited and the grain coarsening of the HAZ for the cup and the lead wire was more obvious than the HAZ of the pin. The micro-tensile test revealed that the fracture occurred at the cup-pin weld zone for all test conditions. The fracture surface could be classified into two parts such as pin portion and cup portion including weld nugget. The failure was seemed to be initiated from the boundary between nugget and pin through the weld joint. The result of the microhardness measurement exhibited that the relatively low hardness value, about 105HV was recorded at the HAZ of the cup. This value was about 50% less than that of the original value of the cup. The reduction of the microhardness was considered as the cause of the grain coarsening due to welding process. It was also appeared that there was no change in electric resistance for the standard electrodes and heat treated electrodes.

• Korean Journal of Environmental Agriculture
• /
• v.37 no.3
• /
• pp.229-234
• /
• 2018

BACKGROUND: in vitro micronucleus test (vitMNT) is one of the promising alternative testing methods in genotoxicity test and was adopted as OECD test guideline for chemical registration. This study was conducted to optimize the cytoplasm conditions in vitMNT using Chinese hamster lung (CHL) cell. METHODS AND RESULTS: In this study cytokinesis-block micronucleus test was conducted. Mitomycin C and colchicine were used as positive control chemicals and were treated for three hours (short time) or twenty-four hours (long time). Giemsa solution was used for cell staining. For optimization of vitMNT, the final fixative was prepared as five concentrations (0%, 1%, 3%, 5%, and 25%) of acetic acid in methanol, and treatment times of the final fixative were varied under four conditions (immediately, one hour, four hours, and one day). CONCLUSION: Acetic acid at 1% in methanol as the final fixative was most adequate to preserve the cytoplasm around the nucleus in the interphase cells. Also, fixative treatment time of cell suspension for one to four hours may minimize the cell rupture. These results can be helpful for getting an accurate result promptly due to clear visual distinction to score micronucleus in vitMNT using giemsa solution.

• Proceedings of the KSME Conference
• /
• 2007.05b
• /
• pp.2222-2227
• /
• 2007

Newly structured metal-supported solid oxide fuel cell was fabricated and characterized by impedance analysis and galvanodynamic experiment. Using a cermet adhesive, thin ceramic layer composed of anode(Ni/YSZ) and electrolyte(YSZ) was joined with STS430 metal support of which flow channel was fabricated. $La_{0.8}Sr_{0.2}Co_{0.4}Mn_{0.6}O_3$ perovskite oxide was used as cathode material. Single cell performance was increased and saturated at operating time to 300hours at 800$^{\circ}C$ because of cathode sintering effect. The sintering effect was reinvestigated by half cell test and exchange current density was measured as 0.005A/$cm^2$. Maximum power density of the cell was 0.09W/$cm^2$ at 800$^{\circ}C$. Numerical analysis was carried out to classify main factors influencing the single cell performances. Compared to experimental IV curve, simulated curve based on experimental parameters such as exchange current density was in good agreement.

• Transactions of the Korean hydrogen and new energy society
• /
• v.6 no.2
• /
• pp.65-73
• /
• 1995

Negative electrode was prepared by mixing $Ti_{0.7}Zr_{0.3}Cr_{0.3}Mn_{0.3}V_{0.6}Ni_{0.8}$ alloy powder with copper or nickel powder and pressing in the air. The cycled electrodes were analyzed with SEM, potentiostat and electrochemical impedance spectroscopy. It was found that the Cu-compacted electrode showed better low temperature dischargeability and higher rate capability than Ni-compacted electrode. From SEM analysis of the cycled electrode compacted with copper powder, it was observed that the surface of MH particles was covered with copper grains and whisker precipitated from electrolyte after dissolution during cell test. It is found that the improved electrode characteristics are attributed to the copper layer on MH particles deposited by dissolution and precipitation(DP) process.

• Laser Solutions
• /
• v.13 no.4
• /
• pp.1-6
• /
• 2010

Recently the use of ultra high strength steels (UHSS) in structural and safety component is rapidly increasing in the automotive industry. For example, 1.5GPa grade hot stamping with die-quenching of boron steel 22MnB5 could apply crash-resistant parts such as bumpers and pillars. The development of laser welding process of hot stamping steels, fundamental bead-on-plate welding and lap joint welding test were carried out using 3kW Nd:YAG laser. Local hardening & HAZ softening occurred in hot stamping steel as a result of metallurgical change caused by the welding heat input in the Nd:YAG laser welding process. The size of soft zones in the hot stamping steel was related to the welding heat input, being smaller at high speeds which generated a smaller heat input. Also in the case of lap joint design structure, same welded characteristics were shown. The HAZ softening degree was controlled to ensure the joint strength.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2004.04a
• /
• pp.376-379
• /
• 2004

pH has been regarded as a master variable governing the heavy metal sorption on fly ash. However, the chemical constituents in the fly ash could also suggest a potential sorption site for heavy metals. So, in this study sequential extraction method is employed to evaluate the sorption behavior of fly ash for cadmium. Two different fly ashes (S-fly ash, T-fly ash) were obtained from different power plants in Korea. First, cadmium is adsorbed under four different initial pHs. And, Cd sorbed in fly ash was sequentially desorbed following the sequential extraction method suggested by Tessier. In test results, the effect of pH increase was differently exerted in two fly ash. In S-fly ash, exchangeable fraction was dominated in low initial pH, however, as increasing initial pH, the fraction bound to carbonate increased. In the T-fly ash, regardless of initial pH the fraction bound to carbonate was major part of sorption estimated. The fraction bound to Fe/Mn oxide was about 10% in T-fly ash, and 5% in S-fly ash at high pH.

• The Korean Journal of Community Living Science
• /
• v.18 no.1
• /
• pp.39-53
• /
• 2007

The purpose of this study was to determine the characteristics of an experimental protective clothing material with regard to comfort and isolation from the hazardous heavy metals produced in municipal waste incineration. An analysis was conducted on the total concentrations of heavy metals in some parts such as surface, middle layer, and interior for the treated fabric, and the untreated one, and working clothes. We conclude that the processed fabric with charcoal for working clothes showed the least exposure to heavy metals of the three. Working clothes worn by workers during waste incineration were much more contaminated than the untreated and treated materials. The material of working clothes could be chosen according to the function with regard to its original chemical characteristics, which are the proper results of the dyeing process. The processed fabric material has high degrees of moisture regain, thermal insulation, water vapor penetration, and antibacterial function; consequently, it is much more comfortable to wear. The fabric material proposed in this research contributed much more to blocking heavy metal concentrations (such as Cd, Pb, Cu, Cr, Zn, Mn) than did the fabric of working clothes at present. Consequently, we strongly suggest that the material of working clothes be upgraded by adopting the above-mentioned charcoal-processed fabric. Materials of working clothes must be improved to increase comfort and prevent harmful gas, flying dust, and heavy metals from permeating the fabrics.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.66 no.4
• /
• pp.252-257
• /
• 2017

In this paper for developing and implementing the HD level triple streaming hybrid security camera which output the three type of video outputs(HD-SDI, EX-SDI, Analog). We design the hardware and program the firmware supporting the main and sub functions. We use MN34229PL as image sensor, EN778, EN331 as image processor, KA909A as reset, iris, day&night function part, A3901SEJTR-T as zoom/focus control part. We request the performance test of developed security camera at the broadcasting and communication fusion testing department of TTA (Telecommunication Technology Association). We can get the three outputs (HD-SDI, EX-SDI, Analog) from the developed security camera, get the world best level at the jitter and eye pattern amplitude value and exceed the world best level at the signal/noise ratio, and minium illumination, power consumption part. The HD level triple streaming hybrid security camera in this paper will be widely used at the security camera because of the better performance and function.

• Journal of radiological science and technology
• /
• v.14 no.1
• /
• pp.49-60
• /
• 1991

Thermoluminescent phosphors, which are now being used widely in radiation dosimetry, have an excellent sensitivity to ionizing radiation. In this study, thermoluminescent phosphors of $CaSO_4$ : Mn, $CaSO_4$ : Dy and $CaSO_4$ : Tm are prepared and their physical properties are investigated by measuring the trapping parameters and their luminescent spectra. By considering the sensitivity to X-ray and fading characteristics, $CaSO_4$ : Dy is most adequate to imaging plate. The imaging plate are prepared by coating the $CaSO_4$ : Dy powder on the Al substrate and its dose dependence is linear within the range of 40 mGy-20 Gy X-ray. The sensitivity of imaging plate depends linearly on the thickness of coated phosphor layer up to $35\;mg/cm^2$ and is independent on the grain size of the phosphor in the range of $70{\sim}250\;{\mu}m$. By photographing the imaging plate, X-ray images of the test object are obtained and better than those of X-ray films.