• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.8
• /
• pp.3-10
• /
• 2014

Millimeter wave (mmWave) has attracted great interest recently and the necessity of Millimeter Mobile Broadband (MMB) system has appeared based on the 4 Generation Long Term Evolution-Advanced (LTE-A) Specification. Currently, there are many studies about the mmWave communication channel. And it is subject of interest to analyze the performance in MMB channel environments. In this paper, we design the MMB system for 5th Generation mobile communication and propose channel models through the analysis of the mmWave propagation characteristics. Also, we have analyzed the performance of the MMB system of 28 GHz band in MMB channel environments.

• Computers and Concrete
• /
• v.14 no.6
• /
• pp.675-694
• /
• 2014

Annular and solid concrete specimens with different aspect ratios and static unconfined compressive strengths were studied for impact loading using SHPB test setup. Numerical simulations in LSDYNA were also carried out and results were validated. The stress-strain curves obtained under dynamic loading were also compared with static compressive tests. The mode of failure of concrete specimen was a typical ductile failure at high strain rates. In general, the dynamic increase factor (DIF) of thin solid specimens was higher than thick samples. In the numerical study, the variation of axial, hydrostatic and radial stresses for solid and annular samples was studied. The core phenomenon due to confinement was observed for solid samples wherein the applied loads were primarily borne by the innermost concrete zone rather than the outer peripheral zone. In the annular samples, especially with large diameter inside hole, the distribution of stresses was relatively uniform along the radial distance. Qualitatively, only a small change in the distribution of stresses for annular samples with different internal diameters studied was observed.

• The Plant Pathology Journal
• /
• v.34 no.4
• /
• pp.335-340
• /
• 2018

To investigate the difference in the disinfectant efficiency of ozone microbubbles ($O_3MB$) and ozone millibubbles ($O_3MMB$), the morphological change of the treated Fusarium oxysporum f. sp. melonis spores was observed with scanning and transmission electron microscopies (SEM and TEM). The disinfectant efficiency of $O_3MB$ on F. oxysporum f. sp. melonis spores was greater than that of $O_3MMB$. On observation with SEM, it was revealed that morphological change of F. oxysporum f. sp. melonis spores was caused by $O_3MB$ and $O_3MMB$, and damage to the spore surfaces by $O_3MB$ occurred sooner than that by $O_3MMB$. On observation with TEM, it was furthermore confirmed that F. oxysporum f. sp. melonis spores treated with $O_3MB$ induced wavy deformation of cell membrane and the intracellular change different from that with $O_3MMB$. Therefore, the greater disinfection efficiency of $O_3MB$ was suggested to be caused due to the function of the MB in addition to the oxidative power of $O_3$.

• Journal of the Korean Society of Safety
• /
• v.28 no.4
• /
• pp.14-18
• /
• 2013

Blades of horizontal axis are nowadays made of composite materials. Generally, composite materials satisfy design provides lower weight and good stiffness, while laminate composites have often damages as like the delamination and cracks at the interface of laminates. The box spar and tail parts of a blade are composed of the CFRP/GFRP hybrid laminate composites. However, delamination and the interfacial crack often occur in the interface of CFRP/GFRP hybrid laminate composites under the mixed mode fracture condition, especially mode I and mode II. Therefore, there is a need for the evaluation of the mixed mode fracture behavior during the delamination of CFRP/GFRP hybrid laminates. This study shows the experimental results for the delamination fracture toughness in CFRP/GFRP hybrid laminate composites. Fracture toughness experiments and estimation are performed by using DMMB(Dissimilar mixed mode bending) specimen. The materials used in the test are a commercial woven type CFRP(Carbon fiber reinforced plastic) prepreg(CF3327) and UD type GFRP(Glass fiber reinforced plastic) prepreg(HD224A). A CFRP/GFRP hybrid laminate composite is composed by the 10 plies CFRP and GFRP prepreg for DMMB. A thickness of CFRP and GFRP layer is 2.5mm and 3.0mm, respectively. Also the fulcrum location which is a loading parameter is changed from 80 to 100mm on the specimen of length 120mm because it defines the ratio of mode I to mode II. In this study, the effects of the fulcrum location are evaluated in the viewpoint of energy release rate in mode I and mode II contribution. The results show that the delamination crack initiates at higher displacement and lower load according to the increase of the fulcrum location ratio. And the variation of the energy release rate for mode I and II contributions for the mode mixity are shown.

• Archives of Plastic Surgery
• /
• v.42 no.6
• /
• pp.735-740
• /
• 2015

Background Botulinum toxin (BT) chemodenervation and anterior belly of digastric muscle (ABD) transfer are both treatment options in the management of an isolated marginal mandibular branch of the facial nerve (MMB) palsy. We compare the patient satisfaction following either BT injections or ABD transfer in the management of their isolated MMB palsy. Methods Patients in the ABD-arm of the study were identified retrospectively from September 2007 to July 2014. The patients in the BT-arm of the study were identified prospectively from those attending the clinic. Both groups of patients completed a validated patient satisfaction survey. Statistical analysis was performed and a P-value <0.05 was considered statistically significant. Results Seven patients were in the ABD-arm and 11 patients in the BT-arm of the study. The patient satisfaction in both groups was high with 45% of ABD-arm patients and 40% of BT-arm patients rating their overall outcome as 'better' or 'much better', which was significantly more than the proportion rating their outcome as 'worse' or 'much worse' (P<0.001), although there was a significant trend towards those in the ABD-arm being more likely to be dissatisfied with their outcome (P=0.01). Conclusions BT therapy is a good first-line intervention in the management of isolated MMB palsy. We have, however, shown that the overall satisfaction in both groups is high. Therefore, in patients who would prefer a more permanent solution to manage their facial asymmetry, ABD transfer remains a satisfactory treatment option with a good level of patient satisfaction.

• The Korean Journal of Food And Nutrition
• /
• v.31 no.1
• /
• pp.43-51
• /
• 2018

This study was conducted to investigate the quality of pumpkin paste added with different starches during storage at $4^{\circ}C$ for 8 days. Pumpkin paste was evaluated for pH, carotenoid, syneresis, color values, texture, and sensory characteristics. The properties of the pumpkin paste were studied on three different starches (CON: control, MCP: cow pea starch, MMB: mung bean starch, and MSP: sweet potato starch). The initial pH of the pumpkin paste with starches were 6.13~6.16. The pH of pumpkin paste increased as the starches added increased. The carotenoid content of CON was higher in the pumpkin paste processing. The change of syneresis significantly increased with the storage period, and the amount of change of MCP and MMB added with starch was smaller than CON without the added starch. The Hunter's L-values of the pumpkin paste increased, whereas the a- and b-value decreased as the amount of starches added increased. The results of the textural analysis showed that the hardness of MCP and MMB was different from that of other pumpkin paste, showing a lower value such as 38.26 g, 38.93 g, while CON and MSP was 40.43 g and 42.49 g, respectively. A sensory evaluation indicated that starches could enhance the overall texture characteristics of pumpkin paste. In terms of the overall acceptance of the pumpkin paste, the experimental group with MCP scored the best.

• KEPCO Journal on Electric Power and Energy
• /
• v.6 no.2
• /
• pp.163-171
• /
• 2020

A model test for assessment of towing stability and seakeeping of a multi-purpose mobile base (MMB) was performed in calm water and wave conditions. Scale ratio of the MMB was 1/48. Tension of the towing line was measured during tests to estimate effective power to tow the full scale MMB. The tests were repeated with towing speed. In addition, an inertial measurement unit was used to measure six DOF motion of the model. Seakeeping performance was assessed through the captive model test.

• The KIPS Transactions:PartA
• /
• v.16A no.4
• /
• pp.263-272
• /
• 2009

For implementing the ubiquitous computing environments with smart home infrastructures, various research on the home network have been performed by several research institutes and companies. Due to the various home network middleware that are developed recently, the standardization of the home network middleware is being delayed and it calls for the middleware bridge which solves the interoperability problem among the heterogeneous middlewares. Now the research on the scheme for interoperability and the development of the various bridges are in progress, such as one-to-one bridge supporting interoperability between two middlewares and one-to-many bridge supporting interoperability among the multi-middlewares. However, existing systems and schemes does not consider the dynamic extensibility and performance that is particularly needed in the smart home environments. The middleware bridge should provide bridge extensibility with zero-configuration for non-expert users. It should also provide the load balancing scheme for efficient and proper traffic distribution. In this paper, we propose a Multi-Middleware Bridge(MMB) for dynamic extensibility and load balancing in home network environments. MMB provides bridge scalability and load balancing through the distributed system structure. We also verify the features such as interoperability, bridge extensibility, and the performance of the load balancing algorithm.

• Biotechnology and Bioprocess Engineering:BBE
• /
• v.3 no.1
• /
• pp.11-14
• /
• 1998

A toluene-oxidizing strain of Pseudomanas mendocina KR1 containing toluene-4-mono-oxygenase (TMO) completely degrades TCE with the addition of toluene as a co-substrate in aerobic condition. In order to construct in situ bioremediation system for TCE degradation without any growth-stimulating nutrients or toxic inducer such as toluene, we used the carbon-starvation promoter of Pseudomonas putida MK1 (Kim, Y. et al., J. bacteriol., 1995). Upon entry into the stationary phase due to the deprivation of nutrients, this promoter is strongly induced without further cell growth. The TMO gene cluster (4.5 kb) was spliced downstream of the carbon starvation promoter of Pseudomonas putida MK1, already cloned in pUC19. TMO under the carbon starvation promoter was not expressed in E. coli cells either in stationary phase or exponential phase. For TMO expression in Pseudomonas strains, tmo and carbon starvation promoter region were recloned into a modified broad-host range vector pMMB67HES which was made from pMMB67HE(8.9 kb) by deletion of tac promoter and lacIq (about 1.5 kb). Indigo was produced by TMO under the carbon starvation promoter in a Pseudomonas strain of post-exponential phase on M9 (0.2% glucose and 1mM indole) or LB. 18% of TCE was degraded in 14 hours after entering the stationary phase at the initial concentration of 6.6 ${\mu}$M in liquid phase.

• Proceedings of the Korean Institute of Communication Sciences Conference
• /
• 1986.10a
• /
• pp.59-63
• /
• 1986

This paper presents a basic planning of CMDSS(Centrallized Maintenance Decision Support System)for future operation and maintenance of telecommunication network, the main components of CMDSS are MDB, MMB, DSDB, MDBMS, MMAMS, and IGMS. ANd the efficiency and the effectiveness depend on the adequate design of the decision procedure to assisy operation and maintenance persinnels.