• Journal of Integrative Natural Science
• /
• v.2 no.1
• /
• pp.1-12
• /
• 2009

This miniaccount presents the selective examples of our recent discoveries in the photopolymerization of vinyl monomers using the organic initiators such as hydrosilanes, poly(hydroarylsilane)s, benzoin silyl ethers, and thianthrene cation radical. In the photopolymerization of vinyl monomers with silanes polysilanes, while the polymerization yields and polymer molecular weights of the poly(MMA)s containing the silyl moieties decreased, the TGA residue yields and intensities of SiH stretching IR bands increased as the mole ratio of the silanes over MMA increased. The hydroarylsilane and poly(hydroarylsilane) seemed to influence strongly on the photopolymerizaiton of olefinic monomers as both chain initiation and chain transfer agents. For the photohomopolymerization and photocopolymerization of MA and AA, the similar trends were observed. Benzoin silyl ethers and thianthrene cation radical also exhibit the photoinitiating ability in the photopolymerization of MMA.

• Journal of the Korean Chemical Society
• /
• v.56 no.5
• /
• pp.597-602
• /
• 2012

The copolymerization of triacetoxyvinylsilane, EGDMA (ethylene glycol dimethacrylate as a cross-linker), HEMA (2-hydroxyethyl methacrylate), MMA (methyl methacrylate), MA (methacrylic acid) was performed in the presence of AIBN (2,2'-azobisisobutyronitrile) as an initiator. Measurement of the physical properties of the resulting copolymers showed that water content, refractive index, visible ray transmittance, and tensile strength were in the range of 35.63~32.44%, 1.4382~1.4480, 89.0~92.5% and 0.346~0.674 kgf, respectively. The values of tensile strength of copolymers-containing hexamethylene diisocyanate were higher than those of the copolymers containing triacetoxyvinylsilane. From the results we came to the conclusion that the produced copolymers are suitable for the application of ophthalmic contact lens with high tensile strength, wettability and duraility.

• Journal of the Korean Chemical Society
• /
• v.53 no.5
• /
• pp.547-552
• /
• 2009

Chitosan, a natural polymer, has been importantly considered as biomedical materials due to its good biocompatibility and various bio-active characteristes. Water soluble chitosan was then copolymerized EGDMA(ethylene glycol dimethacrylate; used as a cross-linking agent for the free-radical copolymerization), MMA (methylmethacrylate), MA (methacrylic acid) in the presence of AIBN (azobisisobutyronitrile) as a radical initiator. The water content and visible transmissibility, ultimate strength of copolymerized ophthalmic polymer were measured to be 24$\sim$59%, 88$\sim$89% and 0.1$\sim$2.4 Kgf, respectively. And also, we tested for antimicrobial activities against staphylococcus aureus, Pseudomonas aeruginosa. They showed that in case of antimicrobial activities, the values including chitosan were much higher than that of the polymers of no including chitosan, suggesting that the copolymer can be used as a novel ophthalmic material of high performance.

• Journal of the Korean Chemical Society
• /
• v.55 no.2
• /
• pp.283-289
• /
• 2011

This study used glycerol dimethacrylate with the cross-linker EGDMA (ethylene glycol dimethacrylate), HEMA (2-hydroxyethyl methacrylate), MMA (methyl methacrylate), MA (methacrylic acid) and the initiator AIBN (azobisisobutyronitrile) for copolymerization. Measurement of the physical properties of the copolymerized polymer showed that the water content was 22~32%, refractive index was 1.442~1.463 and visible ray transmittance 90.0~90.5% while the contact angle showed a distribution between 56 and $65^{\circ}$. Also, the measurement showed that the decreased amount of contact angle of the copolymer measured using the sessile drop method ranged between $9.89^{\circ}$ and $18.99^{\circ}$ with increase of glycerol dimethacrylate. Based on the results of this study, the produced copolymer is suitable for use as a material to high wettability ophthalmic lenses.

• YAKHAK HOEJI
• /
• v.38 no.2
• /
• pp.184-190
• /
• 1994

The activities of nitric oxide synthase and the contents of methylarginines were investigated in the pancreatic tissues of various animals by citrulline-forming method and HPLC, respectively. The high level of in vitro NO synthase activity was detected in chicken pancreas whereas MMA, the strong competitive inhibitor for NO synthase, was detected as trace in the same tissue. On the other hand, the low level of NO synthase activity was observed in the porcine pancreas while the contents of MMA were high. However, it was not possible to find any relationship between NO synthase activities and the contents of dimethylarginines at present time. D'MA was equally distributed among the pancreatic tissues of various animals but DMA was not.

• Nuclear Engineering and Technology
• /
• v.10 no.4
• /
• pp.195-201
• /
• 1978

The radiation-induced graft polymerization of methacrlic acid and methyl methacrylate onto a polyester fabric was investigated with ${\gamma}$-ray as the radiation source, and the rate of grafting was examined. When acrylic acid, methacrylic acid, and methyl methacrylate were grafted onto a polyester fabric, grafting efficiency was depened upon the dielectric constant of the solvent in the monomer mixture. The yield of the graft polymerization was related to the total dose, the concentration of the monomer, and the concentration of the swelling agent. The melting point and the glass transition temperature of MA and MMA grafted copolymers were analysed by means of DTA. Physical properties, such as the moisture regain, the antistatic property, and the wicking time were measured.

• Korean Journal of Materials Research
• /
• v.30 no.6
• /
• pp.273-278
• /
• 2020

This research is conducted to analyze the compatibility of used monomers and produce the high functional hydrogel ophthalmic polymer containing silane and nanoparticles. VTMS (vinyltrimethoxysilane), TAVS [Triacetoxy(vinyl)silane] and cobalt oxide nanoparticles are used as additives for the basic combination of SilM (silicone monomer), MMA (methyl methacrylate) and MA (methyl acrylate). Also, the materials are copolymerized with EGDMA (ethylene glycol dimethacrylate) as cross-linking agent, AIBN (thermal polymerization initiator) as the initiator. It is judged that the lenses of all combinations are optically excellent and thus have good compatibility. Measurement of the optical and physical characteristics of the manufactured hydrophilic ophthalmic polymer are different in each case. Especially for TAVS, the addition of cobalt oxide nanoparticles increases the oxygen permeability. These materials are considered to create synergy, so they can be used in functional hydrogel ophthalmic lenses.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.35D no.8
• /
• pp.62-68
• /
• 1998

Optical broadband second harmonic genration (SHG) in thin film waveguide structure was investigated. The copolymer poly(MMA-co-DR1MA) which was consiste dof PMMA (polymethylmethacrylate) and DR 1 (disperse red 1) was spin coated on the pyrex substrate. The green and near UV SHG were observe dfrom the fundamental beam even though the poled polymer has the absorption in second harmonic wavelength range. It was able to genrate SHG by cerenkov type phase matching. Th epoled polymer film thickness was decided by theoretical analysis. The green (532nm) and near UV SHG (370nm) were observed from the Q-switched Nd-YAG laser (1064nm) and Ti-sapphire laser (740nm). It was in good agreement with the experimental results.

• Elastomers and Composites
• /
• v.28 no.4
• /
• pp.267-273
• /
• 1993

A number of hydrophilic acrylic comonomers were incorporated into styrene-butadiene soap-free emulsion polymerization. It was found that reaction rate decreased according to : AN>AA>MMA>EA>IA>AAM>MA>HEMA. It was also observed that reaction rate increased with decreasing H-bonding factor contribution to the solubility parameter of the hydrophilic comonoer. The SBR latexes were very monodisperse with the particle size distribution of $1.03{\times}1.12$. Since growth rate is proportional to polymerization time, the difference in conversion rates between various comonomers was resulted from the particle number density of SBR latexes for the various hydrophilic comonomers. It was also found that the colloidal stability of the latexes was excellent because no external emulsifier was incorporated.

• Journal of Integrative Natural Science
• /
• v.7 no.1
• /
• pp.5-10
• /
• 2014

A study that copolymerized Ag nanoparticle and furfuryl isocyanate with the crosslinking agent EGDMA (ethylene glycol dimethacrylate), HEMA (2-hydroxyethyl methacrylate), MMA (methyl methacrylate), MA (methacrylic acid) and the initiating agent AIBN (azobisisobutyronitrile) is presented. Measurement of the physical characteristics of the produced macromolecule showed that the water content is 32.08~32.67%, refractive index 1.446~1.448, visible light transparency 83.2~67.6%, contact angle $68.2{\sim}83.5^{\circ}$ and tensile strength 0.541~0.755 kgf. It is also demonstrated that the addition of Ag nanoparticles is associated with the reduction of UV-B transmittance and increase in tensile strength. The results show that the produced copolymer can be used as a material for ophthalmic lenses with durability and UV-blocking properties.