• 한국지반공학회논문집
• /
• 제33권1호
• /
• pp.5-15
• /
• 2017

주면마찰력은 매입말뚝에서 가장 큰 영향 요소이다. 특히 시멘트풀과 지반 사이의 인터페이스 거동에 있어 가장 큰 영향을 미친다. 본 연구에서는 시멘트 풀 영향을 고려하여 단독말뚝에 대한 현장축소모형말뚝 재하시험을 수행하였다. 시험말뚝은 상사비를 고려하여 길이 1.3m 지름 0.067m로 선정하였으며, 굴착공경은 150, 125, 90, 86, 74mm, 시멘트풀 물/시멘트비는 90, 70, 60%로 급속재하시험을 수행하였다. 분석 결과 굴착공경이 증가할수록 지지력 증가를 확인하였다. 또한, 물/시멘트비가 부배합일수록 지지력이 증가하는 것을 확인하였다. 상사비를 고려한 축소모형시험결과, 굴착 공경은 말뚝지름(0.508mm 기준)보다 대략 0.1~0.4D(50~200mm) 크게 시공하는 것이 적합하다. 그리고 시멘트풀 물/시멘트비는 본 연구 결과와 품질관리 등을 고려하였을 때, 70% 정도가 적절하다.

• 구강회복응용과학지
• /
• 제19권3호
• /
• pp.219-237
• /
• 2003

he purpose of this study was to compare the fracture resistance of the IPS Empress ceramic crown with 1.0mm width rounded shoulder, which is usually recommended in all ceramic crown, and 0.5mm width chamfer finish lines on the maxillary first premolar. 30 sound maxillary first premolars were selected and then storaged in 5% NaOCl and saline. 15 teeth were performed preparation for each group(1.0mm rounded shoulder, 0.5mm chamfer). After 30 stone dies were made for each group, the IPS Empress ceramic crowns were fabricated and cemented with resin cement(Bistite resin cement, Tokuyama Soda Co. LTD., Japan) on the natural teeth. The cemented crowns were mounted on the positioning jig and the universal testing machine(Zwick Z020, Zwick Co., Germany)was used to measure the fracture strength, with stress loading on the occlusal surface between buccal and lingual cusp. And also, three-dimensional finite element model was used to measure the stress distribution with two types of the finish lines(1.0mm rounded shoulder, 0.5mm chamfer) and two loading conditions(both buccal and lingual cusp inclination, lingual cusp inclination only). The result of the this study were as follows. In the fracture resistance experiment according to the finish line, the mean fracture strength of rounded shoulder(842N) showed higher value than that of the chamfer(590N) (p<0.05). In the three dimensional finite element analysis of all ceramic crown, metal die and natural teeth model did not show any differences in stress distribution between finish lines. Generally, when force was loaded on the occlusal inclination of buccal and lingual cusp, the stress was concentrated on the loading point and the central groove of occlusal surface. When force was loaded only on the occlusal inclination of lingual cusp, the stress was concentrated on the lingual finish line and loading point.

• 한국콘텐츠학회논문지
• /
• 제9권11호
• /
• pp.280-288
• /
• 2009

본 연구는 3차원 볼륨렌더링 영상의 체적변화를 위한 정밀한 모형을 고안, 제작하고 방사선치료계획 시스템의 재구성 과정에서 모형의 길이, 면적, 부피에 대한 변화를 평가하고자 하였다. 모형을 이용한 표준화된 전산화치료조준계획을 절편두께 1.25, 2.5, 5, 10mm로 시행한 후 3차원 재구성 영상을 절편두께와 모형의 형태에 따라 스캔방향(X), 두께(Y), 테이블 이동거리(Z), 면적(A), 부피(V)에 대한 변화와 분석자간 측정편차 및 최소값과 최대값을 측정하였다. 모형의 횡단면을 재구성한 3차원 볼륨렌더링 영상에서 절편두께가 1.25mm와 2.5mm에서 모형의 형태에 따라 X, Y, Z축 방향으로 최대 0.13cm(p<0.05)의 감소를 보였고 길이, 면적, 부피에 대하여 0.1cm, $0.8cm^2$, $3.99cm^3$(p<0.05) 정도의 감소를 보여 모형과 매우 근접한 영상을 획득하였다. 그러나 절편두께 5mm, 10mm에서 절편두께와 스캔 단면적이 증가하고 원형의 모형일수록 X, Y, Z축 방향으로 최대 0.58cm(p<0.05)의 감소를 보였고 길이, 면적, 부피에 대하여 최대 0.45cm, $8.21cm^2$, $11.03cm^3$(p<0.05)의 감소를 보였다. 모형을 이용한 방사선치료계획의 3차원 볼륨렌더링 영상의 절편두께와 모형의 형태에 따라 체적의 변화가 다양하게 발생하였으며 전산화치료조준계획을 시행할 경우 절편두께가 3mm 이하일 때 임상적으로 적절한 3차원 볼륨렌더링 영상을 얻을 수 있을 것으로 사료된다.

• Computers and Concrete
• /
• 제18권5호
• /
• pp.937-950
• /
• 2016

This study applied autoclave expansion and heat curing to accelerate the hydration of concrete and investigated how these methods affect the expansion rate, crack pattern, aggregate size effect, and expansion of electric arc furnace oxidizing slag (EOS)-containing concrete. An expansion prediction model was simulated to estimate the expansion behavior over a long period and to establish usage guidelines for EOS aggregates. The results showed that the EOS content in concrete should range between 20% and 30% depending on the construction conditions, and that coarse aggregates with a diameter of ${\geq}4.75-mm$ are not applicable to construction engineering. By comparison, aggregates with a size of 1.18-0.03 mm resulted in higher expansion rates; these aggregates can be used depending on the construction conditions. On Day 21, the prediction model attained a coefficient of determination ($R^2$) of at least 0.9.

• 해양환경안전학회지
• /
• 제20권6호
• /
• pp.760-767
• /
• 2014

본 연구에서는 길이가 다른 장방형 실린더 사이에서 발생하는 제트류가 후류에 미치는 영향을 알아보기 위해 회류수조에서 PIV기법을 사용하여 실험을 실시하였다. 장방형 실린더의 높이(h)와 실린더 사이의 간격(gap)은 10mm이며 폭(B)은 300mm로 하였다. 유동방향의 모델의 길이(L)는 30mm, 60mm, 90mm 및 120mm를 각각 적용하였으며, 모델의 높이(H=30mm)를 기준으로 길이의 비가 1, 2, 3,및 4이다. 유입유동은 조류의 수심에 따른 차이를 감안하여 모델의 높이(H)를 기준으로 $Re=1.4{\times}10^4$, $Re=2.0{\times}10^4$, $Re=2.9{\times}10^4$를 각각 적용하였으며. 유동계측을 위한 영역은 실린더 후방으로 모델 높이의 5배까지 설정하였다. 실험결과 유속이 증가함에 따라 와의 크기가 후류영역으로 증가하며, 근접 후류에서는 장방형 구조물일수록 관통류의 속도성분이 증가하는 특성을 나타냈다. 또한 후류로 갈수록 속도결손은 유입유동이 증가할수록 종횡비가 작은 경우에 크게 나타났다.

• Journal of Korean Neurosurgical Society
• /
• 제47권1호
• /
• pp.7-10
• /
• 2010

Objective: In this study, we present a simple closed head injury model as a two-stage experiment. The height of the weight drop enables gradation of head trauma severity. Methods: The head injury device consists of three parts and there are three adjustable parameters-weight (100-600 g). height of fall (5-100 cm) and elasticity of the springs. Thirty male Wistar rats underwent monitoring of intracranial pressure with and without induction of the head injury. Results: The weight drop from 45 to 100 cm led to immediate seizure activity and early death of the experimental animals. Severe head injury was induced from 40 cm weight drop. There was 50% mortality and all surviving rats had behavioral deterioration. Intracranial pressure was 9.3${\pm}$3.76 mmHg. Moderate head injury was induced from 35 cm, mortality decreased to 20-40%, only half of the animals showed behavioral pathology and intracranial pressure was 7.6${\pm}$3.54 mmHg. Weight drop from 30 cm caused mild head injury without mortality and neurological deterioration. Intracranial pressure was slightly higher compared to sham group- 5.5${\pm}$0.74 mmHg and 2.9${\pm}$0.81 mmHg respectively. Conclusion: This model is an eligible tool to create graded brain injury with stepwise intracranial pressure elevation.

• 한국산학기술학회논문지
• /
• 제19권4호
• /
• pp.197-202
• /
• 2018

본 연구는 치과분야에서 가장 큰 변화를 가져온 자동화 시스템의 보급화로 CAD/CAM이 사용됨에 따라, 로스트왁스 테크닉 기법 시스템을 대체 하고 있다. 이에 따라 인상재를 이용하여 구강을 채득하는 방법에서 구강스캐너를 활용하여 디지털 데이터로 치과보철물을 제작하고 있다. 그러나 구강스캐너의 스캐닝 방법에 따라 디지털 데이터의 정밀도가 많을 영향을 받고 있는 실정이다. 이에 본 연구의 목적은 구강스캐너 (Intraoral scanner)의 스캔 작업 방법에 따라 나타날 수 있는 왜곡현상 및 데이터 정확도를 평가하고자 한다. 데스탑 3D 모형 스캐너로 임상에서 사용된 석고 모델을 이용하여 표준 스캔 데이터를 만들고 동일한 모델을 사용하여 구강스캐너로 세 가지 다른 방법의(AS그룹, ZS그룹, OS그룹) 스캔 방법으로 구분하여 각 5회씩 그룹별로 스캔 데이터를 만들었고, ZS그룹에서 0.121mm, AS그룹 0.172mm, OS그룹 0.423mm 정확도를 보여 ZS그룹에서 가장 높은 정확도를 보였고, 최대오차 값은 ZS그룹 0.113mm, AS그룹 0.169mm, OS그룹 0.246으로 최대 오차는 ZS그룹이 가장 낮고 OS그룹이 가장 높게 측정되었다. 세 가지의 스캔 방법은 정확도나 재현성에 있어 확실한 차이를 보였으며 임상에서도 역시 의미 있는 결과로 보였다.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2008년도 하계학술발표대회 논문집
• /
• pp.154-159
• /
• 2008

Two-phase flow boiling heat transfer of R-410A in horizontal small tubes was reported in the present experimental study. The local heat transfer coefficients were obtained over a heat flux range of 5 to 40 kW/$m^2$, a mass flux range of 170 to 600 kg/$m^2s$, a saturation temperature range of 3 to $10^{\circ}C$, and quality up to 1.0. The test section was made of stainless steel tubes with inner diameters of 0.5 and 3.0 mm, and lengths of 330 and 3000 mm, respectively. The section was heated uniformly by applying a direct electric current to the tubes. The effects on heat transfer of mass flux, heat flux, inner tube diameter, and saturation temperature were presented. The experimental heat transfer coefficient is compared with six existing heat transfer coefficient correlations. A new boiling heat transfer coefficient correlation based on the superposition model for R-410A in small tubes was developed with mean deviation of 10.13%.

• 한국농공학회논문집
• /
• 제53권4호
• /
• pp.11-19
• /
• 2011

PADDIMOD2 was deloped to estimate nonpoint source pollution from paddy rice fields. The PADDIMOD2 was enhanced to estimate runoff and pollutant load during non-growing as well as growing season and to be easily used for public by development of Excel based system. Nutrient concentration and hydrology were based on Dirac delta function and continuous source function, and tank model for growing season and Event Mean Concentrations (EMCs) and SCS-Curve Number method for non-growing season. The PADDIMOD2 consists of three main component (input data, parameters data, and output data) by including eight Excel spread sheets. As a result of model application, total precipitation and irrigation were 1,051.7 mm and 439.2 mm, respectivley and surface runoff and water loss including infiltration and evapotranspiration were 463.0 mm and 947.9 mm, respectively. Annual nutrient loadings of T-N and T-P from study area were 6.7 kg/$km^2$/day and 0.5 kg/$km^2$/day, respectively. Development of PADDIMOD2 was focused on minimizing input data and maximizing user friendly system and is expected to be useful tool to evaluate various non-structure BMPs and estimate unit load from paddy rice fields for application at Korean TMDL.

• 대한두개안면성형외과학회지
• /
• 제12권1호
• /
• pp.12-16
• /
• 2011

Purpose: This study examined the biomechanical stability of four different plating techniques in the experimental model of mandibular subcondyle fracture. Methods: Twenty standardized bovine tibia bone samples ($7{\times}1.5{\times}1.0cm$) were used for this study. Each of the four sets of tibia bone was cut to mimic a perpendicular subcondyle fracture in the center area. The osteotomized tibia bone was fixed using one of four different fixation groups (A,B,C,D). The fixation systems included single 2.0 mm 4 hole mini adaption plate (A), single 2.0 mm 4 hole dynamic compression miniplate (B), double fixation with 2.0 mm 4 hole mini adaption plate (C), double fixation with a 2.0 mm 4 hole mini adaption plate and 2.0 mm 4 hole dynamic compression miniplate (D). A bending force was applied to the experimental model using a pressure machine (858 table top system, $MTS^{(R)}$) until failure occurred. The load for permanent deformation, maximum load of failure were measured in the load displacement curve with the chart recorder. Results: Double fixation with a 2.0 mm 4 hole mini adaption plate and a 2.0 mm 4 hole dynamic compression miniplate (D) applied to the anterior and posterior regions of the subcondyle experimental model showed the highest load to failure. Conclusion: From this study, double fixation with an adaption plate and dynamic compression miniplate fixation technique produced the greatest biomechanical stability. This technique may be considered a useful means of fixation to reduce the postoperative internal maxillary fixation period and achieve early mobility of the jaw.