• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.30 no.3
• /
• pp.172-181
• /
• 1994

The mesh selectivity of diamond and suare mesh cod-ends at the Southern Korean Sea and the East China Sea were compared for Pampus argenteus, Trachurus japonicus, Trichiurus lepturus. Selection trials were carried out using diamond and square mesh cod-end by trouser type cod-end with cover net. of which the mesh cod-end has four types : A(51.2mm), B(70.2mm), C(77.6mm), D(88.0mm). Selection curves and selection parameters were calculated using a logistic model. The results obained are summarized as follows : 1. Harvest fish : In B. C and D type selection range and fifty percent selection length of the square mesh were about 21mm, 11mm : 12mm, 18mm and 34mm, 5mm higher than those of the diamond mesh, respectively. Selection factor of master curve for the diamond mesh was 1.54 and for the square mesh was 1.68. The optimum mesh size for the diamond mesh was 97.4mm and for the square mesh was 89.3mm, the difference was 8.1mm. 2. Horse mackerel : In A type, selection range was nearly the same for the diamond and the square mesh, but fifty percent selection length of the square mesh was 43mm higher than the diamond mesh. In B. C and D type, selection range and fifty percent selection length of the square mesh were about 6mm, 3mm : 24mm, 21mm and 11mm, 42mm higher than those of the diamond mesh, respectively. Selection factor of master curve for the diamond mesh was 2.37, for the square mesh was 2.77. The optimum mesh size for the diamond mesh was 78.1mm and for the square mesh was 66.8mm, the difference was 11.3mm. 3. Hair tail : In A, B and C type, selection range of the square mesh was about 34mm, 8mm, 60mm higher than those of the diamond mesh. Fifty percent selection length for the diamond mesh was about 5mm, 7mm, 8mm higher than that of the square mesh. Selection factor of master curve for the diamond mesh was 3.11, for the square mesh was 3.48. The optimum mesh size for the diamond mesh was 64.3mm and for the square mesh was 57.5mm, the difference was 6.8mm.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.30 no.3
• /
• pp.161-171
• /
• 1994

Mesh selection analysis for the trawl net were carried out at the Southern Korean Sea and the East China Sea during the 1992-1994 years by the training ship Seabada of the National Fisheries University of Pusan, using A type (51.2mm), B type (70.2mm), C type (77.6mm), D type (88.0mm) square mesh cod-ends. The fishing trials were made using bottom trawl of the trouser type cod-end with cover net. Selection curves and selection parameters were calculated by a logistic model for Sphyraena pinguis, Pampus argenteus, Trachurus japonicus, Pagrus major, Callanthias japonicus, Trichiurus lepturus. The results obtained are summarized as follows: 1. Red barracuda : Selection range and fifty percent selection length in the A type was 115.8mm, 292.8mm, respectively. 2. Harvest fish : Each selection range and fifty percent selection length in the B. C. and D type was 37.7mm, 113.8mm : 40.1mm, 131.7mm and 64.8mm, 148.6mm, respectively. Selection parameters of master curve were : slope, 3.81 : intercept, -6.4. Optimum mesh size was 89.3mm. 3. Horse mackerel : Each selection range and fifty percent selection length in the A, B, C and D type was 43.0mm, 148.3mm : 60.7mm, 183.2mm, 214.5mm and 91.4mm, 254.9mm, respectively. Selection parameters of master curve were : slope 2.30 : intercept, -6.4. Optimum mesh size was 66.8mm. 4. Red seabrem : Selection range and fifty percent selection length in the D type was 42.7mm, 203.4mm, respectively. 5. Yellowsail red bass : Selection range and fifty percent selection length in the A type was 84.0mm, 110.6mm, respectively. 6. Hair tail : Each selection range and fifty percent selection length in the A, B and C type was 59.7mm, 176.0mm : 100.9mm, 250.7mm and 178.6mm, 307.0mm, respectively. Selection parameters of master curve were : slope, 1.54 : intercept, -5.4. Optimum mesh size was 57.5mm.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.16 no.3
• /
• pp.123-129
• /
• 2023

if we know what we're looking at, we can get a lot of information. Due to the development of eye tracking, Information on gaze point can be obtained through software provided by various eye tracking equipments. However, it is difficult to estimate accurate information such as the actual gaze depth. If it is possible to calibrate the eye tracker with the actual gaze depth, it will enable the derivation of realistic and accurate results with reliable validity in various fields such as simulation, digital twin, VR, and more. Therefore, in this paper, we experiment with acquiring and calibrating raw gaze depth using an eye tracker and software. The experiment involves designing a Deep Neural Network (DNN) model and then acquiring gaze depth values provided by the software for specified distances from 300mm to 10,000mm. The acquired data is trained through the designed DNN model and calibrated to correspond to the actual gaze depth. In our experiments with the calibrated model, we were able to achieve actual gaze depth values of 297mm, 904mm, 1,485mm, 2,005mm, 3,011mm, 4,021mm, 4,972mm, 6,027mm, 7,026mm, 8,043mm, 9,021mm, and 10,076mm for the specified distances from 300mm to 10,000mm.

• Journal of Radiation Protection and Research
• /
• v.25 no.1
• /
• pp.31-36
• /
• 2000

In radiotherapy, it may happen to radiate surrounding normal tissue because of inconsistent field size by changing patient position during treatment. We are going to analyze errors reduced by using immobilization device with Electonic portal imaging device(EPID) in this study. We had treated the twenty-one patients in pelvic region with 10 MV X-ray from Aug. 1998 to Aug. 1999 at Chungnam National University Hospital. All patients were treated at supine position during treatment. They were separated to two groups, 11 patients without device and 10 patients with immobilization device. We used styrofoam for immobilization device and measured the errors of anterior direction for x, y axis and lateral direction for z, y axis from simulation film to EPID image using matching technique. For no immobilization device group, the mean deviation values of x axis and y axis are 0.19 mm. 0.48 mm, respectively and the standard deviations of systematic deviation are 2.38 mm, 2.19 mm, respectively and of random deviation for x axis and y axis are 1.92 mm. 1.29 mm, respectively. The mean deviation values of z axis and y axis are -3.61 mm. 2.07 mm, respectively and the standard deviations of systematic deviation are 3.20 mm, 2.29 mm, respectively and of random deviation for z axis and y axis are 2.73 mm. 1.62 mm, respectively. For immobilization device group, the mean deviation values of x axis and y axis are 0.71 mm. -1.07 mm, respectively and the standard deviations of systematic deviation are 1.80 mm, 2.26 mm, respectively and of random deviation for x axis and y axis are 1.56 mm. 1.27 mm, respectively. The mean deviation values of z axis and y axis are -1.76 mm. 1.08 mm, respectively and the standard deviations of systematic deviation are 1.87 mm, 2.83 mm, respectively and of random deviation for x axis and y axis are 1.68 mm, 1.65 mm, respectively. Because of reducing random and systematic error using immobilization device, we had obtained good reproducibility of patient setup during treatment so that we recommend the use of immobilization device in pelvic region of radiation treatment.

• Journal of Technologic Dentistry
• /
• v.23 no.2
• /
• pp.189-202
• /
• 2002

A study on reflective spectrum between In-Ceram alumina plate(IAP) and IPS empress 2 plate were carried out in order to determine the difference of reflective spectrum rates between materials and between thicknesses of materials(0.8mm, 1.0mm, 1.2mm) by visible wave. The rates are measured by spectrophotometer(Top scan model TC-1800). And an analysis of ANOVA and paired sample t-test were carried out. The results are summarized as follows. 1. The reflective rates of IAP and IPS increased slowly as visible wave spectrum increased. 2. The difference of reflective rates of IAP between 0.8mm and 1.0mm is significant but a little(less than 1%). The differences of reflective rates of IAP between 0.8mm and l.2mm and between 1.0mm and l.2mm are significant(8%, 10% ). 3. The differences of reflective rates of IPS between 0.8mm and 1.0mm and between 0.8mm and 1.2mm and between 1.0mm and 1.2mm are significant(0.06 %, 0.01 %, 2 %). 4. The differences of reflective rates of 0.8mm, 1.0mm between IAP and IPS are significant but a little(less than 0.9%, 0.5%). The difference of reflective rates of l.2mm between IAP and IPS is significant and larger than the other thicknesses relatively(7 %).

• Journal of radiological science and technology
• /
• v.25 no.2
• /
• pp.83-83
• /
• 2002

국내 35개 병원의 44대의 CT장치를 대상으로 CT장치의 성능을 크게 7가지의 항목별로 구분하여 평가한 결과는 다음과 같았다. 물의 평균 CT number는 -18.9HU와 +68.6HU의 범위에 속했으며, 전체 장치의 평균은 $2.4{\pm}13.0\;HU$였다. 물의 평균 CT number의 권장수준을 -6과 +6로 하였을 경우 이에 적합한 장치는 35대(79.5%)였다. Contrast scale은 장치의 종류에 따라 많은 차이를 나타내었으나 평균은 $2.02{\pm}10^{-4}{\sim}1.665{\pm}10^{-5}$이었다. 직선성을 나타내는 상관계수는 0.984에서 0.992의 분포를 나타내었으며 평균은 $0.990{\pm}0.002$였다. 공간분해능은 0.60 m에서 1.25 mm의 분포를 나타내었으며 전체 장치의 65.9%에 해당되는 29대에서 0.75 mm의 공간 해상능을 나타내었다. 대조도 분해능은 3.2 mm(1/8인치)에서 19.1 mm(3/4인치)의 분포를 나타내었으며, 대조도 분해능의 권장수준을 6.4 mm 이하로 하였을 경우 측정 대상장치 44대 중 이에 적합한 장치는 37대(84.1%)였다. 슬라이스 두께의 설정치가 1 mm인 경우 측정치의 평균은 $2.0{\pm}0.6\;mm$이였으며, 설정치가 2 mm와 3 mm인 경우 측정치는 각각 $3.0{\pm}0.7\;mm$와 $3.5{\pm}0.6\;mm$이였다. 설정치가 5 mm와 7 mm인 경우 측정치는 각각 $5.1{\pm}0.6\;mm$, $7.0{\pm}0.5mm$이였다. 그리고 10 mm의 설정치에서는 $9.8{\pm}0.7\;mm$의 측정치를 나타내었다. 위치잡이용 중심선의 좌우방향의 편차는 -4.7 mm에서 +41.7 mm의 범위였으며, 상하방향의 편차는 -3.7 mm에서 +4.6 mm의 범위였다. 위치잡이용 중심선의 좌우 및 상하방향의 권장수준을 ${\pm}3.0\;mm$과 ${\pm}3.0\;mm$ 이하로 하였을 경우 41대의 측정 대상장치에서 이에 적합한 장치는 33대(80.5 %)였다.

• Journal of Korean Ophthalmic Optics Society
• /
• v.15 no.1
• /
• pp.117-122
• /
• 2010

Purpose: The purpose of this study was to measure the active force of extraocular muscles on mono- and binocular movements for 62 healthy koreans (male: 29, female: 33). Methods: The force of adduction, abduction, elevation and depression, of right and left eye on monocular movement were tested with horizontal moving distance based on corneal limbus and the force of superior oblique muscle and inferior oblique muscle on binocular movement were measured with vertical moving distance between corneal limbus. The distances were obtained by high resolution digital image processing. Results: At monocular movements of tested subjects. the power of abduction, adduction, elevation and depression of right and left eye were (male) 9.35 nun, 9.75 mm, (female) 9.02 mm, 9.52 mm, (male) 10.23 mm, 10.16 mm, (female) 10.17 mm, 10.07 mm, (male) 7.01 mm,6.91 mm, (female) 6.98 mm, 6.64 mm, (male) 7.52 mm, 6.82 mm, (female) 7.52 mm, 6.67 mm, respectively. The active force of binocular movements were 54.8% hyperergasia and 45.1% hypergasia/67.7% hyperergasia and 32.2% hypergasia with inferior oblique muscle, 64.5% hyperergasia and 35.5% hypergasia/58.1% hyperergasia and 41.9% hypergasia with superior oblique muscle, respectively. Conclusions: The force of horizontal movement was higher than vertical movement. The value of adduction was higher than abduction on horizontal movement, and the value of depression was higher than elevation on vertical movement. In the both of inferior and superior oblique muscle, the ratio of hyperergasia was higher than that of hypergasia.

• Proceedings of the KOR-BRONCHOESO Conference
• /
• 1982.05a
• /
• pp.9.1-9
• /
• 1982

The authors have measured various dimensions of the larynx of twenty adult cadavers. (male; 13, female; 7) The result were as follows, 1) Transverse diameter between the greater horns of the hyoid bone; M.52.58mm, F.43.07mm. 2) Transverse diameter between the lesser horns of the hyoid bone; M.36.20mm, F.30.20mm. 3) Transverse diameter of the thyroid cartilage; M.50.58mm, F.42.58mm. 4) Transverse diameter of the cricoid cartlage; M.30.14mm, F.26.94mm. 5) Distance from the lower margin of the hyoid bone to the thyroid notch; M.12.83mm, F.10.92mm. 6) Distance from the lower margin of the thyroid cartilage to the lower margin of the cricoid cartilage; M.16.40mm, F.10.26mm. 7) Distance from the upper margin of the thyroid cartilage to the lower margin of the cricoid cartilage; M.34.65mm, F.34.61mm. 8) Anteroposterior diameter of the cricoid cartilage; M.25.32mm, F.20.01mm. 9) Transverse diameter of the epiglottis; M.29.32mm, F.22.08mm. 10) Vertical diameter of the epiglottis; M.35.90mm, F.27.90mm. 11) Transverse diameter between the cuneiform tubercles; M.17.69mm, F.13.52mm. 12) Length of the vocal fold; M.11.61mm, F.10.40mm. 13) Transvers diameter of the vocal fold; M.18.62mm, F.18.27mm. 14) Distance from the upper margin of the epiglottis to the vocal fold; M.42.45mm, F.34.52mm. 15) Anteroposterior length of the vocal fold; M.19.25mm, F.10.70mm.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.37 no.3
• /
• pp.105-112
• /
• 2009

This study has attempted to facilitate various new technologies related to indoor containers and develop a desirable planting environment after investigating the growth (including root growth) of shade-tolerant landscape plants under slit processing, a natural indoor ventilation system. The following results were found: In terms of the shoot growth of Fatsia japonica in a slit container, no distinctive difference was observed in comparison with the control group. However, growth was good when the container 250mm tall or taller. Therefore, it was verified that optical soil depth is more important than slit processing in shoot growth of Fatsia japonica. In Fatsia japonica root length was observed as follows: Control 2(250mm) > Slit 2(250mm) > Control 1(195mm) > Slit 3(360mm) > Control 3(360mm) > Slit 1(195mm). The largest growth was observed in Control 2(250mm), which had no slit processing. In term of root width, this was lower than the initial value in all groups, which means that the root grew vertically, not horizontally. In terms of plant height of Ophiopogon japonicus, a gradual increase was observed in the control group that had no slit processing. No significant growth was detected in the slit system, however. In terms of shoot number, slit containers were generally higher than the control group. In terms of fresh and dry weights, on the contrary, slit containers were mostly lower than the control group. In Ophiopogon japonicus, root length was observed as follows: Slit 2(250mm) > Slit 1(195mm) > Control 2(250mm) > Control 3(360mm) > Slit 3(360mm) > Control 1(195mm). In Ardisia japonica, slit containers were mostly greater than control group in terms of plant height. The greatest plant height was observed at Slit 2(250mm) instead of Slit 1(195mm) and Slit 3(360mm). Except for plant height and shoot number, however, no significant shoot and root growth was observed. Root length was observed as follows: Slit 2(250mm) > Slit 3(360mm) > Control 3(360mm) > Slit 1(195mm) > Control 2(250mm) > Control 1(195mm). Therefore, root length in slit containers was mostly greater than in the control group. The width of root, however, declined in general.

• Journal of radiological science and technology
• /
• v.30 no.4
• /
• pp.335-341
• /
• 2007

General anatomy classifies diaphragm as muscle of boundary between chest and abdomen, while radiology divides it into right and left hemidiaphragm, because it is more advantageous in radiological diagnosis on chest and abdomen. Based on these anatomic characteristics of diaphragm, this study aimed to measure the height and curvature of right and left diaphragm in simple chest radiography. As a result, this study came to the following conclusions : 1. For all subjects who joined this study, it was found that their mean transverse diameter in internal diameter of thorax(ID) amounted to 293.3 mm(min. 221.0 mm, max 335.3 mm). 2. For the right and left height of diaphragm, it was found that 81.4% showed higher right diaphragm ; 16.2% showed equivalent height between right and left diaphragm ; and only 2.4% showed higher left diaphragm. 3. For higher right diaphragm, it was found that the mean height of right diaphragm amounted to 15.2 mm(min. height = 2.0 mm, max. height = 41.7 mm). 4. For higher left diaphragm, it was found that the mean height of left diaphragm amounted to 11.5 mm(min. height = 4.7 mm, max. height = 30.4 mm). 5. The mean curvature of right diaphragm amounted to 22.9 mm(min. curvature = 10.4 mm, max. curvature = 37.3 mm). 6. The mean curvature of left diaphragm amounted to 22.4 mm(min. curvature = 11.3 mm, max. curvature = 42.2 mm). 7. For possible associations between ID and right/left diaphragm curvature, it was noted that ID was in significantly positive correlations with right diaphragm curvature(r= .427, p<.001) and left diaphragm curvature(r= .425, p<.001) on statistical level. 8. For possible associations between right and left diaphragm curvature, it was found that right diaphragm curvature was in significantly positive correlations with left diaphragm curvature(r= .403, p<.001).