• Asian Pacific Journal of Cancer Prevention
• /
• 제15권19호
• /
• pp.8475-8478
• /
• 2014

Purpose: This systematic analysis was conducted to evaluate the efficacy and safety of pemetrexed-based chemoradiotherapy in treating patients with locally advanced or metastatic esophageal cancer. Methods: Clinical studies evaluating the efficacy and safety of pemetrexed based regimens on response and safety for relevant patients were identified using a predefined search strategy. Pooled response rates (RRs) were calculated. Results: For pemetrexed-based regimens, 4 clinical studies including 47 patients with locally advanced or metastatic esophageal cancer were considered eligible for inclusion. Systematic analysis showed that, in all patients, the pooled RR was 51% (24/47). Major adverse effects of grade III/IV were esophagitis, neutropenia, thrombocytopenia, anemia anorexia, fatigue, diarrhea, dysphagia and vomiting. No treatment related death occurred with pemetrexed-based treatment. Conclusion: This systematic analysis suggests that pemetrexed based radiotherapy is associated with reasonable activity and good tolerability in treating patients with locally advanced or metastatic esophageal cancer.

• 복식
• /
• 제58권4호
• /
• pp.26-34
• /
• 2008

The purpose of this study was to create a database of information on the mechanical properties of two different waterproof and breathable shell fabric groups(high density woven and PTFE laminate) used for outdoor apparel and to compare and correlate data of their mechanical properties and hand values. The results of this study were as follows; There were no statistically significant differences between two fabric groups in extension, bending and shearing properties. There were statistically significant differences between two fabric groups in MMD, SMD, LC and we values. High density woven fabrics had smoother surface than PTFE laminated fabrics. PTFE laminated fabrics can be compressed easily more than high density woven fabrics but their recovery after compression was not better than high density woven fabrics. There were statistically significant differences between two fabric groups in NUMERI, FUKURAMI. There was statistically significant difference between two fabric groups in total hand value. Total hand value and mean deviation of MIU had a very high and statistically significant negative correlation coefficient.

• 한국의류산업학회지
• /
• 제7권6호
• /
• pp.673-679
• /
• 2005

This study surveys the fabric surface properties such as mean value of the coefficient of friction(MIU), mean deviation of the coefficient of friction(MMD) and mean deviation of surface roughness(SMD) due to warp and weft tension differences using KES-FB system. For this purpose, fabric is designed as 5 harness Satin weave using 150d/48f warp and 200d/384f weft polyester filaments, and is woven by Omega$^{(R)}$ rapier loom by Textec Co.Ltd and Vamatex-P1001ES$^{(R)}$ rapier loom by Vamatex Co.Ltd respectively. These grey fabrics are processed on the same dyeing and finishing processes. The fabric surface properties according to the weaving looms are analysed with warp and weft weaving tensions. And also surveyed the difference of fabric surface properties according to the fabric positions such as center and each edge of fabrics for the sensitive garment. Fabric thickness was also measured and discussed according to the fabric positions such as center and each of fabrics with two looms weaving tensons.

• 한국의류학회지
• /
• 제26권1호
• /
• pp.160-167
• /
• 2002

Stretch fabrics are wide-spread for high performance clothing use with requirements of fitness and adaptability to human's movement. A newly developed 100% PET high stretch fabric has excellent properties with respect to stretch, softness, bulkiness, and apparent volume compared to PET filament fabrics. The 100% PET high stretch fabric shows advantages of a dimensional stability, dye and agent adaptability in dying and finishing process, a property of stretch recovery after washing and lower production cost than that of spandex fabric. KES-FB was used to measure mechanical properties to various directions of the fabric. This study centered on whether the 100% PET high stretch fabric is suitable to quality and shape retention of fabric by testing several properties including tensile, compression, shear, bending and surface characteristic to various measuring directions. Tensile linearity showed maximum value at $0^{\circ}$ in plain and $90^{\circ}$ in twill. Shear Stiffness of plain and twill showed maximum value equally at $45^{\circ}\;and\;135^{\circ}$. Bending rigidity showed maximum value at $0^{\circ}$ in plain and $45^{\circ}$ twill. Mean deviation of MIU showed maximum value at $0^{\circ}\;and\;90^{\circ}$ in plain and $135^{\circ}$ in twill.

• 한국정보처리학회논문지
• /
• 제4권6호
• /
• pp.1601-1614
• /
• 1997

본 논문에서는 ATM-LAN 환경의 MOD 서버들로부터 클라이언트들에게 프레임 기반의 CM(Continuous Media) 데이터 스트림을 전송하기 위한 기술들을 제안한다. 여기서 프레임이란 CM의 디스플레이 단위를 의미한다. 세부적으로는 수송 계층과 IP 계층의 개입없이 애플리케이션과 AAL이 직접적으로 접속함으로써 ATM-Specific한 native ATM 서비스를 적용한다. 또한 네비게이션 서버를 통한 투명한 브라이징 메카니즘, 서버와 클라이언트들간의 PVC를 통한 세션 설정 과정, 애플리케이션과 AAL과 QoS 협상 및 예약 과정, MIU 사이즈를 초과하는 프레임들에 대한 쪼갬/붙임 알고리즘 등을 제안하고 실험 결과를 제시한다.

• 한국염색가공학회지
• /
• 제17권5호
• /
• pp.26-36
• /
• 2005

This study was carried to evaluate mechanical characteristics of Poly(ethylene terephthalate) fabrics (by Kawabata evaluation system(KES)) which was systematically treated with $O_2$ low temperature plasma and chitosan acetate solution. Furthermore, surface structure was investigated by SEM, AFM, air permeability and wettability. Tensile energy(WT), shear rigidity(G) and surface roughness(MIU) properties calculated by KES-FB have increased with increasing plasma treatment time, while bending rigidity(G) and energy of compression(WC) value were decreased compared with those of the untreated. SEM photographs showed the identification of chitosan coating but did not confirm the plasma etching structure. Air permeability was decreased according to plasma treatment time with increasing concentrations of chitosan. The water absorption rate made rapid progress by chitosan treatment.

• 한국의류산업학회지
• /
• 제5권4호
• /
• pp.408-412
• /
• 2003

The micro structure of POY was modified and a wool-like touch yarn of composite fibers with different shrinkage was made. With this yarn 12 different fabrics with wool like touch were prepared. The characteristic physical property changes of the fabrics examined are as follows: 1. In all cases, the initial high shrinkage stages were observed in hot water treatment and the 3D images of complex multilayer of typical doubling fibers with different shrinkage were also observed in hot air treatment of 170C. 2. The tensile strength changes of satin and plain fabrics with the change of twist count showed similar behavior. However, WT's were slightly higher and RT's was lower in twill and satin fabrics than those in plain fabric. 3. Since a slight decrease of B's of twill fabric found with increasing twist count under given experimental condition, it could be influenced on the anti-drape stiffness was decreased and flexibility was increased. 4. A significant decrease of G values was observed in the twist count 800-1000 T.P.M However, in the twist count higher than 1000 T.P.M G values observed were kept nearly constant. 5. MIU of plain and twill fabrics showed a drastic decrease at the twist count higher than 1000 T.P.M.

• 한국의류학회지
• /
• 제20권5호
• /
• pp.783-791
• /
• 1996

The effect of alkali treatment on the changes in characteristics, mechanical properties, and hand of polyester fabrics was studied. Two kinds of fabrics having different yarn deniers were treated varying weight loss. The results were as follows; 1. Changes in constructional characteristics by alkali treatment were: a decrease in weight & thickness of fabric, a decrease in yarn denier, a decrease in apparent density of fabric, an increase in porosity to air, and a change fiber surface. 2. As for the changes in mechanical properties by alkali treatment, findings were : an increase in WT, RT, MIU, LC, and WC, a decrease in LT, B,2HB, G,2HG,2HGS, MMD, SMD, and RC, ana an increase in drape. 3. Changes in hand by alkali treatment were: a decrease in KOSHI and HARE, an increase in FUUURAMI, SHARI, KISHIMI, and SHENAYAUASA, and an increase in T.H.V 4. In the case of the same weight loss, the hand of 40/24 fabric being composed of thinner yarns was better than the hand of 50/24 fabric. 5. When 50/24 fabric was treated to have the same weight with 40/24 fabric, so the yam deniers of two fabrics were the same, the hand of 50/24 fabric having larger weight loss was better than the hand of 40/24 fabric.

• 대한가정학회지
• /
• 제36권8호
• /
• pp.51-61
• /
• 1998

This paper discussed the assessment of hand of polyester fabrics changed by alkaline hydrolysis. This study analyzed the relations between the change of mechanical property and the hand value according to the weight loss of polyester fabrics. The results are as follows; Objective hand by KES-FB system, revealed that for tensile properties, as the weight loss increased, WT, RT increased and LT decreased. For bending properties, as the weight loss increased, B and 2HB showed smaller values. For shear properties, as the weight loss increased, G, 2HG and 2HG5 decreased. For surface properties, as the weight loss increased, MIU increased, but MMD and SMD did not show any trend. For compression properties, LC, WC and RC did not show significant differences according to the degree of weight loss. In case of hand value, Koshi(stiffness), Hari(anti-drape stiffness), Kisimi(scrooping feeling) and Shinayakasa(flexibility with soft feeling) showed a meaningful results depending on the degree of weight loss. However, Shari(crispness) and Fukurami(fullness and softness) did not show meaningful result. Koshi, Hari and Shinayakasa are high correlation with tensile property, bendibg property shear properties, thickness and weight. Kisimi is high correlation with tensile property, bending property, thickness and weight. Shari, Fukurami and THV did not show any meaningful difference whth any mechanical properties.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 하계학술대회 논문집 D
• /
• pp.2325-2327
• /
• 2002

포항 가속기연구소(PAL)에서는 포항방사광가속기(PLS)가 가동을 시작한 1994년 이후 현재까지 사용되어 온 기존의 제어 시스템을 새로운 환경인 EPICS(Experimental Physics and Industrial Control System) 시스템으로 개발하고 있다. EPICS 시스템의 구성은 IOC(Input/Ouput Controller) 와 OPI(Operator Interface)의 2-Layer로 구성되며 이는 MIU(Machine Interfaces Unit), SCC(Subsystem Computer Control System) 그리고 HMI(Human Machine Interface)로 이어지는 기존의 3-Layer 단계 중 SCC단계를 줄여 2-Layer로 구성된다. 이들 두 계층간의 통신은 Client(OPI)/Server(IOC) 구조의 Channel Access를 통해서 이루어진다. 개발중인 EPICS 시스템은 Open Architecture 구조로 IOC와 OPI 각 부분에서 개발시에 사용된 운영체제나 Hardware 를 사용하지 않고 다른 운영체제나 Hardware를 사용하더라도 하나의 공통부분 즉, Channel Access만 있으면 이를 통해 서로 다른 Subsystem IOC의 데이터를 Access할 수 있다. 전체 EPICS 제어시스템 중 저장링 운전의 핵심이 되는 BPM(Beam Position Monitoring) 및 MPS(Magnet Power Supply) 시스템은 IOC부분에 MVME5100(Target Machine) 보드와 vxWorks(Operating System)를 이용하고 OPI부분에는 SUN Workstation(Host Machine)와 Solaris(Operating System)을 사용하여 개발하고 있다. 본 논문에서는 IOC 및 OPI의 설치 절차와 설치 방법에 대해 기술하였다.