• Corrosion Science and Technology
• /
• v.20 no.2
• /
• pp.69-76
• /
• 2021

In this work, we have performed a corrosion failure analysis of a leaking tube connected to an upper header of a condensate pre-heater in a heat recovery steam generator. It was revealed that the leakage position in the tube was the location where the materials were easily vulnerable due to tensile residual stresses induced by the material manufacturing process and welding process. In addition to an imbalance in the module induced by temperature difference during operation of the pre-heater, the weight of the modules and thermal fatigue provoked a type of stress of tensile-tensile fatigue on the tube. Thus, the leakage position of the pre-heater was exposed to the tensile stress on the inner surface of the tube facing the gas, which rendered the unstable oxide layer susceptible to corrosion and the formation of pits on the water side. The cracks propagated along with the degraded microstructure in a transgranular cracking mode under fatigue loading and finally resulted in water leakage.

• Journal of Korean Society on Water Environment
• /
• v.27 no.1
• /
• pp.44-53
• /
• 2011

Membrane bio-reactor (MBR) has several advantages over the conventional activated sludge process, including a high biomass, low sludge production, and better permeate quality. Therefore, the MBR have gained popularity for municipal and industrial wastewater treatment. However the MBR usually were used for sewage and low streng th wastewater treatment because of membrane fouling problem and limitation of oxygen transfer into biomass. In this study, the hybrid process combining MBR and pure oxygen was tested for high strength organic wastewater treatment in the COD loading range from 2 to $10kgCOD/m^3{\cdot}day$. The hybrid process, membrane coupled pure oxygen high compact reactor (MPHCR), had been operated for one year and operation parameters, the effect of COD loading, MLSS concentration and the location of membrane module were studied for membrane fouling characteristic. Also membrane resistance test and the component of foulant was analyzed to investigate what is specific foulant in the MBR.

• Journal of the Semiconductor & Display Technology
• /
• v.21 no.4
• /
• pp.92-98
• /
• 2022

This paper proposes a new method of the traffic signal detection and the recognition in an HSI color model. The proposed method firstly converts a ROI image in the RGB model to in the HSI model to segment the color of a traffic signal. Secondly, the segmented colors are dilated by the morphological processing to connect the traffic signal light and the signal light case and finally, it extracts the traffic signal light and the case by the aspect ratio using the connected component analysis. The extracted components show the detection and the recognition of the traffic signal lights. The proposed method is implemented using C language in Raspberry Pi 4 system with a camera module for a real-time image processing. The system was fixedly installed in a moving vehicle, and it recorded a video like a vehicle black box. Each frame of the recorded video was extracted, and then the proposed method was tested. The results show that the proposed method is successful for the detection and the recognition of traffic signals.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.16 no.4
• /
• pp.719-724
• /
• 2021

In this paper, we studied properties of smart farms that can automatically control not only the temperature and humidity but also the illumination to improve plant productivity. The smart farm was designed to allow the controllers to operate through Arduino by receiving input values from each sensor. In addition, to maximize the convenience of smart farm, the Bluetooth communication module is used to control the smart phone. The study confirmed that the automation function of smart farms can create an environment suitable for plants to grow.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.18 no.1
• /
• pp.177-184
• /
• 2023

In this paper, based on Arduino, a vehicle is installed at the bottom of the 3D printer so that Arduino controls the vehicle that can expand the moving space. A stepping motor was mounted on the front wheel of the vehicle and precisely controlled using a motor driver. As a result, when moving 5cm, 25cm, and 50cm, the mean value of error rate was 0.6%, 0.04%, and 0.02%, respectively, to enable accurate distance control.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2010.11a
• /
• pp.72-75
• /
• 2010

Google을 시작으로 포털 사이트들이 Maps API를 공개하면서 맵 응용에 대한 수요가 급증하고 있다. 맵 응용의 개발은 대부분 수작업으로 이루어지고 있기 때문에 맵 응용의 생산성이 떨어질 뿐만 아니라 유지 보수에도 많은 시간과 노력이 요구되고 있다. 우리가 설계하고 구현한 MapAppGen은 ModuleGen, IndexGen, MapGen으로 구성되며 맵 응용을 자동으로 생성한다. MapAppGen은 Google Maps API를 사용하여 CMS(Content Management System) 중의 하나인 Drupal에 적용 가능한 모듈들을 생성해 맵 응용에 대한 생산성을 향상시켜 준다. MapAppGen처럼 맵 응용을 위해 Drupal 모듈을 생성하는 생성기는 현재 존재하지 않으며 Gmap이나 NodeMap과 같이 고정된 맵 인터페이스 모듈들은 존재한다. 그러나 Gmap이나 NodeMap 모듈은 Drupal의 기본 컨텐츠 타입 모듈에 의존하기 때문에 사용자는 원하는 지형/지물 컨텐츠 타입을 생성해 활용할 수 없고 지형/지물들을 유형별로 맵 상에 표시하고 연관된 컨텐츠들을 검색할 수도 없다.

• Journal of Radiopharmaceuticals and Molecular Probes
• /
• v.8 no.1
• /
• pp.3-8
• /
• 2022

Alteration of the mGluR5 density is closely related to various brain diseases including schizophrenia, depression, Parkinson's disease, and Alzheimer's disease. Therefore, mGluR5 is considered as a valuable imaging biomarker for brain disease and many radiopharmaceuticals have been developed so far. Among them, [¹⁸F]FPEB has favorable pharmacokinetic characteristics, and this is the most frequently used radiopharmaceutical for preclinical and clinical studies. In the present study, we want to introduce the optimized radiosynthetic method for the routine production of [¹⁸F]FPEB using a GE TRACERlabTM FXFN pro module. In addition, the entire process was monitored with a webcam to solve the problems arising from the synthetic process. As a result, [¹⁸F]FPEB was prepared by nucleophilic substitution from its nitro- precursor at 120℃ for 20 min in dimethyl sulfoxide. Radiochemical yield was 13.7 ± 5.1% (decay-corrected, n = 91) with the molar activity of 84 ± 17 GBq/µmol at the end of synthesis. The radiochemical purity was determined to be above 96%. The manufactured [¹⁸F]FPEB injection for quality controls were carried out in accordance with an KIRAMS approved protocol, as per ICH and USP guidelines.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2010.04a
• /
• pp.334-337
• /
• 2010

디지털 선박 운행시 예기치 못한 상황에 의한 선박 내 화재나 충돌 등 긴급 상황 발생 시에 대형의 해난 사고가 발생할 수 있다. 이에 본 논문에서는 선박 상태를 자체 진단하여 모니터링하고 위험 분석을 통해 관리할 수 있는 시스템을 구현하고자 한다. 해양 디지털선박의 환경, 상황을 수집할 수 있는 무선 센서를 이용하여 수집된 환경 정보를 분석하는 시스템을 제안하였으며, 센싱된 데이터를 분석하기 위하여 역전파 신경망을 설계하였다. 300개의 데이터 집합을 사용하여 역전파 신경망을 실험한 결과 약 96%의 정확도를 가졌다. 제안된 시스템은 하드웨어 (UStar-2400 ISP, UStar-2400, Wireless sensors) 부분과 소프트웨어 부분(User Interface module)으로 구성되며 소프트웨어 부분은 HOST PC에 삽입된다. 그리고 시스템의 정확도를 개선하기 위하여 전방향 에러 정정 시스템(LDPC)을 구현하였고 진단된 결과는 CDMA 방식으로 전송하여 해양디지털선박 감지 모니터링 시스템을 구현했다.

• Progress in Superconductivity and Cryogenics
• /
• v.8 no.2
• /
• pp.43-45
• /
• 2006

Recently, the resistive Fault Current Limiter (SFCL) made with Coated Conductor (CC) has been researched with an advanced capability in CC. Current limiting elements must be connected in series in order to fabricate the resistive SFCL having large capacity. By the way, unless the applied voltage in the SFCL is distributed to the elements when the fault occurred, those elements will be critically damaged. Thus simultaneous quench of the elements is an important factor to design the resistive SFCL. In this paper, simultaneous quench characteristics of current limiting module by using BSCCO 2223 were researched before manufacturing the resistive SFCL by using CC. At the first fault stage, the elements generated the resistance at the same time. However, the unequal voltage is applied to the each element in process of time. The method is suggested to solve the problem of the unequal distribution. These experimental results will play an important part in developing for the resistive SFCL by using CC.

• Progress in Superconductivity and Cryogenics
• /
• v.12 no.4
• /
• pp.31-35
• /
• 2010

In superconducting magnet applications, winding methods of the superconducting magnet can be classified into a layer winding and a pancake winding. The superconducting magnet using high temperature superconductor (HTS) with rectangular shape is generally fabricated using the pancake winding method. On the other hand, low temperature superconducting (LTS) magnet may be wound by either a pancake winding or a layer winding. Compared with the layer winding, the pancake winding method has a merit of easy replacement of a damaged pancake module, but it also has a demerit of requirement of splicing between each double pancake modules. In this paper, we investigated characteristics of the layer and pancake winding methods using HTS. Six samples were wound out of BSCCO and Coated Conductors (CCs) by two winding methods and their characteristics were experimentally observed.