• Convergence Security Journal
• /
• v.7 no.4
• /
• pp.23-28
• /
• 2007

In this research, we suggest the unknown intrusion detection system with SVM(Support Vector Machines). At the system, at first, collected training-packets are processed through packet image creating module. And then, it is studied by the SVM module. Finally, the studied SVM module classifies the test-data unsing test-packet-image. This system's stability and efficient characteristic of security is far superior than the existing it.

• Proceedings of the KIEE Conference
• /
• 1993.07a
• /
• pp.271-273
• /
• 1993

One maglev vehicle is composed of 6 or 8 modules. Each module is composed of 4 staggered magnets attached to an aluminum bogie. In the view point of levitation control except propulsion-by LIM. 5 is the maximum degree of freedom to be controlled. But rolling control of the vhhicle depends on the bogie structure. We describe just anti-roll type bogie structure and 4 degree of freedom control is sufficient for levitation quality improvement. Multivariable pole-placement concept is used for controller design. Control experiment is performed on a specially designed test module as well as actual bogie system.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2009.05a
• /
• pp.53-58
• /
• 2009

Solar photovoltaic power generation system is judging that by the most suitable new refreshing energy in real condition of our country forward continuously interest for solar photovoltaic power generation system and diffusion me enlarged. Output decline problem is item to consider necessarily and should be verified in continuous interest for solar photovoltaic power generation system are diffusion. Present plan that minimize output decline calculating module liver optimum interval that consider recitation of a poem to reduce output decline by module liver shade by incidence angle consideration and this that occupy most parts among factor because do output of solar photovoltaic power generation system well.

• Proceedings of the KIPE Conference
• /
• 2015.07a
• /
• pp.289-290
• /
• 2015

본 논문에서는 고효율, 저가격의 400W급 태양광 Module Integrated Converter (MIC)를 소개한다. 제안하는 MIC는 Interleaved flyback 토폴로지를 기반으로, 계통 주기 내에서 DCM과 CCM의 모든 동작 영역을 활용할 수 있게 설계되어 도통 손실 및 전력 용량을 개선한다. 또한 새로운 출력 제어 전류 알고리즘을 통해 기존의 Flyback의 CCM 영역에서의 제어문제를 해결하여 개발된 Flyback MIC의 실효성을 획득한다. 최종적으로 400W급 시제품을 제작하여 타당성 검증 및 결과를 제시한다.

• Proceedings of the KIPE Conference
• /
• 2012.07a
• /
• pp.168-169
• /
• 2012

본 논문에서는 Cascade Buck-Boost 컨버터를 사용한 모듈 직접형 컨버터 (Module Integrated Converter, MIC)를 이용하여 독립형으로 저전압 배터리를 충전할 수 있는 알고리즘을 제안하고 이를 검증한다. 제안한 알고리즘은 입력 조건의 변화를 고려하여 MPPT 충전 동작 및 Constant Current (CC) - Constant Voltage (CV) 제어를 수행할 수 있어 배터리를 항상 최대의 전력으로 충전할 수 있게 한다. 제안한 충전 장치는 150W급 PV Module을 사용하여, 98.4%의 고효율 획득 및 알고리즘 성능을 검증한다.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.11a
• /
• pp.377-378
• /
• 2007

In this paper, we were confirmed the optical characteristics of LED module by changing ambient temperature and driving current. When we supplied same driving current, the brightness quality drops due to an increased ambient temperature. The difference of brightness properties came out more large according to an increased driving current. Moreover, peak wavelength become shifted by long wavelength and declined output power by increasing driving current.

• Journal of the Korean Society of Industry Convergence
• /
• v.22 no.4
• /
• pp.459-465
• /
• 2019

There is an increasing interest in health and research on methods for measuring human body information. The importance of continuously observing information such as the step change and the walking speed is increasing. At a person's gait, information about the disease and the currently weakened area can be known. In this paper, gait is measured using wearable walking module built in shoes. We want to make continuous measurement possible by simplifying gait measurement method. This module is designed to receive information of gyro sensor and acceleration sensor. The designed module is capable of WiFi communication and the collected walking information is stored in the server. The information stored in the server is corrected by integrating the acceleration sensor and the gyro sensor value. A band-pass filter was used to reduce the error. This data is categorized by the Gait Finder into walking and waiting states. When walking, each step is divided and stored separately for analysis.

• The Journal of Korea Robotics Society
• /
• v.13 no.4
• /
• pp.237-247
• /
• 2018

In this paper, we describe a sensor module that monitors fire environment by analyzing fire characteristics. We analyzed the smoke characteristics of indoor fire. Six different environments were defined according to the type of smoke and the flame, and the sensors available for each environment were combined. Based on this analysis, the sensors were selected from the perspective of firefighter. The sensor module consists of an RGB camera, an infrared camera and a radar. It is designed with minimum weight to fit on the robot. the enclosure of sensor is designed to protect against the radiant heat of the fire scene. We propose a single camera mode, thermal stereo mode, data fusion mode, and radar mode that can be used depending on the fire scene. Thermal stereo was effectively refined using an image segmentation algorithm, SLIC (Simple Linear Iterative Clustering). In order to reproduce the fire scene, three fire test environments were built and each sensor was verified.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2019.05a
• /
• pp.421-422
• /
• 2019

In this paper, we present the results of the implementation of the strain gauge sensor module which can be applied to measure the load weight in preparation for forklifts with high frequency of safety accidents in the industrial field. The sensor module consisted of strain gauge, LNA, LPF and ADC. In order to increase the accuracy and durability of the sensor, four sensors were inserted into four anchor bolts.

• Nuclear Engineering and Technology
• /
• v.55 no.7
• /
• pp.2407-2418
• /
• 2023

Internal replaceable electronic module substitutions can impact EMC (ElectroMagnetic Compatibility) qualification testing and results if EMC testing is conducted at the cabinet level. The impact of component substitutions on EMC qualification results therefore should be evaluated. If a qualitative evaluation is not adequate to ensure that the modified product will not impact the cabinet level EMC qualification results, a new qualification testing should be conducted. Component level retesting should be conducted under electromagnetically equivalent conditions with the cabinet level test. This paper analyzes the propagation of conducted susceptibility test waveforms in a representative cabinet and evaluates the impact of component substitutions on cabinet level EMC qualification results according to the location of the replacement items. A guideline for a qualitative evaluation of the impact of component substitutions is described based on the propagation of the conducted susceptibility test waveforms. A module level test method is also described based on an analysis of the shielding effectiveness of the cabinet.