• Asian Pacific Journal of Cancer Prevention
• /
• v.14 no.5
• /
• pp.2839-2843
• /
• 2013

Objective: To investigate the effects of miR-106b on malignant characteristics of gastric cancer cells, and explore possible mechanisms. Methods: Expression of miR-106b, p21 and E2F was determined by real-time PCR. Transfection with miR-106b mimics was conducted, and gastric cancer cells with miR-106b overexpression were obtained. Cells transfected with mimic mutants and those without transfection served as negative and blank controls, respectively. Flow cytometry and transwell assays were adopted to detect the effects of miR-106b overexpression on cell cycle, migration and invasion of gastric cancer cells. Results:. The expression of miR- 106b in gastric cancer cells was significantly higher than that in normal gastric mucosa cells. Furthermore, the expression level of miR-106b rose according to the degree of malignacy among the three GC cell strains (MKN- 45 > SGC-7901 > MKN-28). Overexpression of miR-106b shortened the G0/G1 phase and accelerated cell cycle progression, while reducing p21 and E2F5, without any significant effects on the capacity for migration and invasion of gastric cancer cells. Conclusions: miR-106b may promote cell cycling of gastric cancer cells through regulation of p21 and E2F5 target gene expression.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.37
• /
• pp.20.1-20.7
• /
• 2015

Background: The objectives of the present study were to investigate the reliability and outcomes of computer-assisted techniques in mandibular reconstruction with a fibula flap and verify whether the surgical navigation system was feasible in mandible reconstructive surgery. Methods: Eight cases were enrolled in the computer assisted surgery (CAS) group and 14 cases in the traditional group. The shaping and fixation of the fibula grafts were guided by computer assisted techniques, which could be monitored with the BrainLAB surgical navigation system. The variation of mandible configuration was evaluated by CT measurement in the Mimics software, including the variation of length, width, height and gonial angle of the mandible. The 3D facial soft tissue alteration was also analyzed in 3D chromatogram by Geomagic software. Results: All 22 fibula flaps survived. The mandibular configurations and facial contours had a better clinic result in the CAS group. The length, width, height and gonial angle of the reconstructive mandible were more similar to the original one. The Wilcoxon rank sum test analysis suggested significant differences in the measurements. The chromatographic analysis also visually showed superiority over the traditional group. Conclusions: The computer assisted surgical navigation method used in mandibular reconstruction is feasible and precise for clinical application. The contour of the reconstructed mandible and facial symmetry are improved with computer techniques.

• Journal of Advanced Navigation Technology
• /
• v.24 no.1
• /
• pp.47-52
• /
• 2020

Direction of arrival (DoA) estimation is a scheme of estimating the directions of targets by analyzing signals generated or reflected from the targets and is used in various fields. Artificial neural networks (ANN) is a field of machine learning that mimics the neural network of living organisms. They show good performance in pattern recognition. Although researches has been using ANNs to estimate the DoAs, there are limitationsin dealing with variations of the signal-to-noise ratio (SNR) of the target signals. In this paper, we propose a three-stage ANN algorithm for DoA estimation. The proposed algorithm can minimize the performance reduction by applying the model trained in a single SNR environment to various environments through a 'noise reduction process'. Furthermore, the scheme reduces the difficulty in learning and maintains efficiency in estimation, by employing a process of DoA shift. We compare the performance of the proposed algorithm with Cramer-Rao bound (CRB) and the performances of existing subspace-based algorithms and show that the proposed scheme exhibits better performance than other schemes in some severe environments such as low SNR environments or situations in which targets are located very close to each other.

• Clinics in Shoulder and Elbow
• /
• v.18 no.2
• /
• pp.86-90
• /
• 2015

Background: Although there are several methods for evaluating bone quality, Hounsfield units (HU), a standardized computed tomography (CT) attenuation coefficient, provide a useful tool for estimating focal bone mineral density (BMD). The aim of this study is to investigate the HU for evaluating the degree of osteoporosis in greater tuberosity with regard to anchor positioning. Methods: Forty patients diagnosed as normal on shoulder CT were included and categorized according to age and gender. Axially sectioned CT images were processed to 3-dimensional models containing information about bone quality using Mimics (14.11 platform v14.1.1.1 Materialise). Three-dimensional anchors were simulated and positioned according to 6 regions of interest (ROI) in the greater tuberosity classified using Tingart's system. Mean HU of intra-anchor volumes in the 6 regions was measured. Results: A significant decrease in HU was observed with increasing age (p=0.0001) and menopause (p<0.001). A significant difference in HU was found between male and female groups with males showing the higher values (p=0.0001). HU of proximal areas of ROI was higher than those of distal areas (p<0.005). However, although mean HU of distal posterior ROI showed the lowest values, no statistically significant difference was found between anterior, middle, and posterior regions (p=0.087). Conclusions: Mean HU of ROIs provides a tool for preoperative assessment of focal BMD, which is a factor of suture anchor stability and can be used to aid decision-making regarding secure anchor positioning for rotator cuff repair. Our data support that the most secure point is the proximal regions of ROI.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.36 no.12
• /
• pp.1497-1502
• /
• 2012

To manufacture a robot hand that essentially mimics the functions of a human hand, it is necessary to develop flexible actuators and sensors. In this study, we propose the design, manufacture, and performance verification of flexible actuators and sensors based on Electro Active Polymer (EAP). EAP is fabricated as a type of film, and it moves with changes in the voltage because of contraction and expansion in the polymer film. Furthermore, if a force is applied to an EAP film, its thickness and effective area change, and therefore, the capacitance also changes. By using this mechanism, we produce capacitive actuators and sensors. In this study, we propose an EAP-based capacitive sensor and evaluate its use as a robot hand sensor.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.53 no.3
• /
• pp.303-307
• /
• 2008

Cotyledon Black Decay (CBD) on soybean sprout mimics the black spot due to microbial infection. CBD, not visible or predictable at seedlot state, for some reason, shows up exclusively on cotyledon of soybean sprout during sprouting process. Such an incidence rate fluctuated from 0.8 to 19.5% over three years from 2004. We suspected some pod-infecting anthracnose fungi and/or pod-blight pathogen, or pod-sucking bean bug, one of the major pests of soybean, might have involved, of which we ruled out fungal pathogen because it was preventable through heat treatment, a proven method for seedlot disinfestation. The healthy seeds artificially fed by bean bug for one to seven days were sprouted, and 6 to 41% of the soybean sprout revealed the CBD mimic to those occurred in soybean sprout from previous commercial seedlot screening experiments. This finding is the first report to confirm that bean bug damage to pod at $R_8$ stage is directly responsible for the CBD, which did not concur with any other deleterious effects on sprouting such as reduction in hypocotyls elongation and rooting except unsightly sprout quality. However, earlier feeding either at green pod or greenish yellow pod stage ($R_6$ -early $R_7$ stage) resulted in rather severe damages, which strikingly reduced hypocotyls growth to about one forth to about two third, as well as the reduction in rates of seed germination.

• The Korean Journal of Cytopathology
• /
• v.18 no.1
• /
• pp.36-45
• /
• 2007

Objective : To identify key cytologic features for diagnosis of adenocarcinoma and morphologic differentiation from reactive/reparative respiratory epithelium. Study Design : The cytomorphologic features of 145 pulmonary cytology specimens (sputum and bronchial washing), which included 117 histologically proven adenocarcinomas and 28 non-neoplastic lesions, cytologically diagnosed as atypia and suspicious for malignancy (adenocarcinoma) were reviewed retrospectively. We analyzed 11 morphologic criteria in pulmonary cytologic specimens. Results: Over 110 of 117 cases of adenocarcinomas revealed nuclear membrane irregularities, non-cohesive cells, single atypical cells, moderate to markedly enlarged nuclei and an increased nuclear/cytoplasmic (N/C) ratio. Chromatin clearing, chromatin heterogeneity and hyperchromasia were seen in 102, 99 and 97 cases, respectively. All 28 cases involving non-neoplastic lesions revealed hyperplastic reactive pneumocytes, hyperplastic reactive bronchial epithelium, or degenerating macrophages. The non-neoplastic lesions revealed a small number of atypical cell clusters and paucity or absence of atypical single cells. Conclusion : The most important morphologic features for diagnosis of adenocarcinoma are nuclear membrane irregularities, non-cohesive cells, single atypical cell, moderate to markedly enlarged nuclei and increased N/C ratio. Chromatin clearing, chromatin heterogeneity and hyperchromasia were also helpful features, while pleomorphism and prominent nucleoli were less valuable.

• Development and Reproduction
• /
• v.6 no.1
• /
• pp.31-35
• /
• 2002

The major urinary proteins(MUPs) of mice that bind hydrophobic molecules known as pheromones are regulated in part by the actions of growth hormone. The expression of the MUPs was therefore investigated in transgenic mice that express a human growth hormone-releasing factor gene from a metallothionein gene promoter(MT-GRF) and as a result have elevated growth hormone levels. MUPs were severely down-regulated in the urine of these animals compared to normal mice or to control transgenic mice expressing another gene(the inhibin a subunit) from the same metallothionein promoter(MT-Inh) and more MUPs disappeared in male mice than female ones. MUPs were also down-regulated in the urine of the UT-GRF-injected mice. In addition, it was observed that the urine of the MT-GRF mice included a high molecular weight protein that co-migrates with the major serum protein albumin, indicating an impairment in glomerular filtration within the kidney. The urinary loss of serum proteins was more severe in male MT-GRF mice than female ones. Thus the overexpression of human GRF mimics changes observed in MUP protein expression and glomerular function in other models of growth hormone hypersecretion with sex-dependent differential effects.

• Clinics in Shoulder and Elbow
• /
• v.23 no.3
• /
• pp.119-124
• /
• 2020

Background: This study was performed to compare glenoid version and inclination measured using two-dimensional (2D) images from computed tomography (CT) scans or three-dimensional (3D) reconstructed bone models. Methods: Thirty patients who had undergone conventional CT scans were included. Two orthopedic surgeons measured glenoid version and inclination three times on 2D images from CT scans (2D measurement), and two other orthopedic surgeons performed the same measurements using 3D reconstructed bone models (3D measurement). The 3D-reconstructed bone models were acquired and measured with Mimics and 3-Matics (Materialise). Results: Mean glenoid version and inclination in 2D measurements were -1.705° and 9.08°, respectively, while those in 3D measurements were 2.635° and 7.23°. The intra-observer reliability in 2D measurements was 0.605 and 0.698, respectively, while that in 3D measurements was 0.883 and 0.892. The inter-observer reliability in 2D measurements was 0.456 and 0.374, respectively, while that in 3D measurements was 0.853 and 0.845. Conclusions: The difference between 2D and 3D measurements is not due to differences in image data but to the use of different tools. However, more consistent results were obtained in 3D measurement. Therefore, 3D measurement can be a good alternative for measuring glenoid version and inclination.

• Journal of Internet Computing and Services
• /
• v.15 no.4
• /
• pp.9-20
• /
• 2014

Making good predictions about the outcome of one's actions would seem to be essential in the context of social interaction and decision-making. This paper proposes a computational model for learning articulated motion patterns for action recognition, which mimics biological-inspired visual perception processing of human brain. Developed model of cortical architecture for the unsupervised learning of motion sequence, builds upon neurophysiological knowledge about the cortical sites such as IT, MT, STS and specific neuronal representation which contribute to articulated motion perception. Experiments show how the model automatically selects significant motion patterns as well as meaningful static snapshot categories from continuous video input. Such key poses correspond to articulated postures which are utilized in probing the trained network to impose implied motion perception from static views. We also present how sequence selective representations are learned in STS by fusing snapshot and motion input and how learned feedback connections enable making predictions about future input sequence. Network simulations demonstrate the computational capacity of the proposed model for motion recognition.