• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2000.11a
• /
• pp.75-78
• /
• 2000

Since the most of malfunctions in the industrial equipment controlled by processors is occured by the Electrical Fast Transient(EFT), the International Electrotechnical Commission(IEC) prepared the dummy signal to test the immunity level of the equipments. In this paper. we designed a new EMC filter for power line in break-box, which is consist of the feed-through capacitor and ferrite materials with high permeability which was wound or inserted in the second layer of the power cable in order to increase common mode inductance. We have obtained a excellent insertion loss characteristics over wide frequency band from 100 KHz up to 6 GHz. It is expected that the new EMC filter could be effectively used for industrial, MIL, and medical equipments to reduce a malfunctions and be suitable for IEC 61000-4-4.

• Clinical and Experimental Reproductive Medicine
• /
• v.27 no.4
• /
• pp.387-392
• /
• 2000

Objectives: 1) To compare the efficacy of urofollitropin (Follimon) to that of recombinant human FSH (rhFSH) on the growth and maturation of mouse early preantral follicles in vitro, and 2) effect of vitrification on the growth and maturation of preantral follicles and oocytes . Methods: Isolated early preantra1 follicles (100-130 ${\mu}m$ diameter) were cultured for 12 days in 20 ${\mu}l$ ${\alpha}$-MEM media drop under the mineral oil. Follimon or rhFSH was added to the culture medium at various concentrations (0, 10, 100, and 1000 mIU/ml). Results: With Follimon, the dose of 10 mIU/ml showed the best follicle survival, growth, and MIl rate of oocyte than the other concentrations. Whereas the optimal dose of rhFSH was 100 mIU/ml. Despite the different optimal doses, the efficacy of two different FSHs on the follicle growth and maturation was similar. Isolated mouse preantral follicles were cryopreserved by vitrification and cultured in vitro for 12 days with 100 mIU/ml rhFSH. Despite the decreased follicular survival rate after thawing, the follicular growth and maturation rate of its oocyte were comparable to those of the fresh follicle. Conclusion: Results from the present study revealed that 1) the optimal doses of Follimon and rhFSH for in-vitro culture of mouse follicles are different, and 2) the frozen-thawed follicles develop normally after vitrification.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2014.11a
• /
• pp.118-119
• /
• 2014

원전 운전 중 2차계통 구성재료가 부식되어 철 산화물이 증기발생기 내부로 유입된다. 유입된 철산화물은 고온고압의 환경에서 침적되어 슬러지가 된다. 침적된 슬러지는 증기발생기 전열관 재료에 응력부식균열(SCC)을 일으키는 주원인으로 원전에서는 철 산화물의 유입을 최소화하기 위해 기동전 2차계통을 순환 세정하고 있다. 해외 원전에서는 고분자 아크릴산(Polyacrylic Acid)을 순환세정시 주입함으로써 2차계통 철 산화물 제거 효율을 높인 사례가 있었다. 이에 우리 원전에서도 기동전 순환세정시 고분자 아크릴산을 주입 적용하였다. 고분자 아크릴산 주입 전 필수적으로 이뤄져야할 연구는 고분자 아크릴산이 재료에 미치는 영향평가이다. 본 연구에서는 고분자 아크릴산 농도(1, 10, 100 ppm)에 따라 2차계통 구성재료인 SA106 Gr.B와 Alloy 690의 건전성에 미치는 영향를 수행하였다. 평가방법으로는 전기화학 분극실험, 시편을 침지시켜 실험 전, 후 무게 감량을 이용한 부식률 측정, 표면 상태분석등을 이용하여 종합적으로 평가하였다. 전기화학 분극실험과 부식률 측정결과, 고분자 아크릴산 농도가 높을수록 부식은 증가하였고 고분자 아크릴산 농도 100 ppm일 때 최대 부식률이 0.037 mils로 계산되었다. 이는 부식허용 기준치(5.8 mils)보다는 100배이상 낮았으며 표면분석 결과 고분자 아크릴산으로 인한 pitting 부식은 발생하지 않았다. 이와 같은 결과로 기동시 환경에서 고분자 아크릴산 농도 100 ppm까지는 재료 건전성에 미치는 영향은 거의 없는 것으로 판단된다.

• Fire Science and Engineering
• /
• v.29 no.4
• /
• pp.49-56
• /
• 2015

Toxic gases from five types of interior building materials were investigated according to Naval Engineering Standard (NES) 713. The materials were plywood, indoor wall coverings (wood wall plate members and pine wood), reinforced Styrofoam insulation, laminate flooring, and PVC. Specimens were measured using an NES 713 toxicity test apparatus to analyze the hazardous substances in combustion gas from the materials. We used the US Department of Defense standard (MIL-DTL, Military Standard) to calculate the toxicity index of the combustion gas. Emissions of $CO_2$ from all specimens did not exceed the NES 713 limit of 100,000 ppm. The amount of CO gas emissions from reinforced Styrofoam insulation was 6,098 ppm. 25 ppm and 49 ppm of formaldehyde were released from the reinforced Styrofoam insulation and PVC flooring, respectively. These values were less than the limit of 400 ppm. The highest emissions were from $NO_X$ emitted by plywood and were above the limit of 250 ppm. The toxicity index of the specimens were calculated as 5.19 for plywood, 4.13 for PVC flooring, 2.35 for reinforced Styrofoam insulation, 2.34 for laminate flooring, and 1.22 for indoor wall coverings (pine wood). Our research helps us to understand the properties of these five interior materials by analyzing the combustion gas and explaining the toxicity of constituents and the toxicity index. Also, it would be useful for giving fundamentals to guide the safe use of interior materials for applications.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.27 no.9
• /
• pp.834-843
• /
• 2016

In this paper, the design of a PIN diode S-band transfer-type SP4T including its driver circuit is presented. Each path of the SP4T is composed of the cascade connection of series-shunt PIN diodes to improve the isolation performance. The SP4T is implemented using chip type PIN diodes and a 20 mil AIN substrate fabricated using thin film technology. The driver circuit for the SP4T is designed using a multiplexer and four NMOS-PMOS push-pull pair. From on-wafer measurement, the fabriacted SP4T shows a maximum insertion loss of 1.1 dB and a minimum isolation of 41 dB. The time performance of the driver circuit is evaluated using the packaged PIN diodes with the identical PIN diode chip, and the transition time for on-off and off-on are below 100 nsec. For an input power level of 150 W, the measured insertion loss and isolation are close to those of the on-wafer measurement taking into consideration of the coaxial package mismatch and insertion loss.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.22 no.5
• /
• pp.19-29
• /
• 2023

The accident rate in South Korea is simply classified according to the road type and the number of lanes, but other countries apply various factors affect accidents. In this study, national highways where accidents occurred were divided into urban, rural, older, and modern roads using TAAS(Traffic Accident Analysis System) data, and a model of accident costs savings is suggested. As a result of analyzing 1,416.2 km, the fatality rate(person/100mil-vehicle·km) was 4.21 for urban-older, 1.37 for urban-modern, 2.18 for rural-older, and 0.99 for rural-modern roads. The rates of urban roads had a higher result than rural. The injury rate(person/100mil-vehicle·km) for urban-older was 182.63, that for urban-modern was 103.42, that for rural-older was 67.44, and that for rural-modern road was 42.96, which showed a similar pattern to fatality rates. Accident rates of a modern road were much lower than the KDI Guideline. The benefit of applying the result of this study was calculated and the valuation of accident costs savings is increased from 0.6% to 14.1%, while B/C is improved from 0.626 to 0.724.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.20 no.5
• /
• pp.639-646
• /
• 2017

This paper describes the sound insulation and structural safety of the shelter which may be used for shooters. The noise level of the shelter should be less than 100 dB on the basis of the Industrial Safety and Act, the World Health Organization and the MIL-STD. The sound insulation design was designed for the shelter structure. The designed shelter performance was verified by the real measurement after completing the construction of the shelter. The system was also designed using the finite element method with data of sound pressure measured in the test. Its response was obtained numerically. It is proved that the shelter structure is sufficiently safe considering the calculated maximum stress level with the allowable stress of structural property.

• Food Science and Preservation
• /
• v.6 no.1
• /
• pp.71-75
• /
• 1999

Power consumption, mesh size, moisture content, color difference, amylogram of rice flour milled with water soaked rice were compared with that of rice using dry pin mil process. Maximum water absorbance of rice was 35% for 2.5 hr. Power consumption to mill the soaked rice was less than of dry rice by 6.9kW/100Kg. Moisture content of rice flour from the water soaked rice was 2% higher than that of rice flour from dry rice. Population of flour particle was 52.9% of 60 mesh and 32.6% of 60∼80mesh. Gelatinization temperature of rice flour from the water soaked rice was 30C lower than that of rice flour from dry rice. Maximum and minimum viscosity of rice flour from the water soaked rice after boiling were 296 cps and 158 cps, independently. Brightness and whiteness of the rice flour from the water soaked rice were increased upto 10hr soaking and decreased after 17hr soaking. Brightness and whiteness of the rice flour were 96.17 and 96.02, independently.

• Nutritional Sciences
• /
• v.6 no.2
• /
• pp.100-105
• /
• 2003

Small dense LDL(LDL III) is emerging as a major risk factor for coronary artery disease. LDL III generation is associated with high triglyceride concentration, high hepatic lipase activity, and high cholesterol ester transfer protein (CETP) levels. CETP polymorphisms have been reported to be associated with coronary artery disease. In this study, we investigated the relationship between CETP polymorphism and LDL III generation. VLDL1, VLDL2, IDL and LDL subfractions were measured in 87 normal healthy Korean subjects who had been SNP genotyped for Taq1B, I405v and A629C. We found no differences in LDL subfractions and lipoprotein composition between homozygotes for Taq1B2B2, and those for Taq1B1B1 and Taq1B1B2. There were no differences in LDL subfractions and lipoprotein composition between homozygotes for 629AA, and those for 629AC and -629CC. However, homozygotes for 405VV had a significantly lower LDL III concentration and proportion than those for 405II and 405IV. We concluded that, among the Taq1B, I405V and A629C polymorphisms, only the 1405V polymorphism was associated with the concentration and proportion of LDL III.

• Journal of the Korean Society of Safety
• /
• v.1 no.1
• /
• pp.81-87
• /
• 1986

System 安全工學 지금까지의 安全을 한마디로 말하면 要素安全 즉 機械, 機具, 設備, 作業力法등 필요한 要素別로 安全對策을 생각해 왔다. 이에 대하여 System安全이라고 하면 機械마다의 工程이 綜合된 전 工程 즉 System全體에 대한 綜合的 安全을 System安全이라고 말할 수 있다. A 工程에서의 缺陷이 事故없이 B 工程으로 흘러가서 事故를 유발할 수도 있고 혹은 C 工程에서 災害를 發生시킬 수도 있으며 그 事故가 當該工程으로 끝나는 것이 아니라 全工程을 마비 시키거나 破괴 시키는 結果를 초래 하게 되므로 從來의 方式에 따른 缺陷工程에 局限된 安全만으로는 設備의 安全性을 確保할 수가 없는 것이다. 여기서 잠시 System安全의 歷史를 살펴보지 않을 수 없다. 元來 System安全은 1950年代 후반 東西간의 軍備경쟁의 와중에서 開發되기 시작한 미사일 開發作業에서 연속 4回의 大事故가 發生하여 수 100萬＄의 損失을 가져 왔다. 이때 그 原內調査 결과 根本的으로 해결하지 않으면 안될 安全性에 관한 몇가지 문제가 지적되기에 이르러 1962年 $\ulcorner$空軍彈道 미사일 開發을 위한 System安全工學$\lrcorner$이라는 最初의 美軍사양서가 公表되고 이후 이 System Safety는 全 美軍에 適用되면서 1977年 6月 MIL-S-882 $A\ulcorner$System安全計劃의 必須條件$\lrcorner$(System Safety Program Reguirment)이 되어 오늘에 이르고 있다. 元來이 規格은 美軍의 裝備에 關한 계약 條件으로 制定되었으나 現在는 一般産業에 있어서의 System 安全에 關한 有力한 지침으로 활용되고 있다. 이와 함께 1974年 美原子力 委員會가 실시한 原子力 플렌트 安全設備에서도 이러한 System技法이 적용되어 System 安全工學의 發展에 크게 기여하게 되었다. 日本國에서는 1976年 勞動者에서 化學플렌트의 安全性設備에서 F.T.A에 의한 再評價를 실시하여 System安全分析 技法이 全國으로 확신 오늘에 이르고 있다. 本章에서는 System安全工學읜 한 解析技法인 F.T.A(Fault Tree Analysis)에 關해서 그 基本的인 事項을 論하고 通用에 關해서는 다음에 論하기로 하겠다.