• Journal of Urban Science
• /
• v.8 no.2
• /
• pp.29-34
• /
• 2019

Benzene pollution is becoming increasingly serious, and the treatment technology of benzene has attracted much attention. In this paper, a self-made photocatalytic reactor was used to explore the removal rate of benzene under the ultraviolet light with the wavelength of 253.7nm. The results showed that the degradation rate of benzene decreased from 64.29% to 16.26% when the concentration increased from 43mg/㎥ to 256mg/㎥ under the condition of 28W UV light intensity and 50s residence time. Under the condition of 28W UV light intensity and 103mg/㎥ concentration, the residence time increased from 16.5s to 50s, and the benzene removal rate increased from 13.23% to 42.72%.Under the condition of benzene concentration 103mg/㎥ and residence time of 50s, the removal rate of benzene increased from 29.34% to 52.58% in the process of UV light intensity rising from 28W to 48W.It is concluded that decreasing the concentration and increasing the residence time of gas were beneficial to the removal of benzene and increasing the light intensity can improve the removal rate of benzene.

• Journal of the Semiconductor & Display Technology
• /
• v.12 no.2
• /
• pp.45-50
• /
• 2013

This paper focuses on the fundamental issues for improving the efficiency and throughput of the AC PDP (Plasma Display Panel) manufacturing. The properties of the MgO protective layer affect the PDP efficiency. Especially, the secondary electron emission efficiency was affected on the deposition rate of MgO during the evaporation. In this study, the deposition rate of 5 $\AA$/s has given the maximum efficiency value of 0.05 It is demonstrated that the impurity gases such as $H_2O$, $CO_2$, CO or $N_2$, and $O_2$ can be remained inside the PDP panel before sealing and the amount of the impurity gases decreased rapidly as the base vacuum level increased, especially near $10^{-5}$ torr. The fundamental solution in order to overcome these problems is the vacuum in-line sealing process from the MgO evaporation to the final sealing of the panel without breaking the vacuum. We have demonstrated this fundamental process technology and shown the feasibility. The firing voltage was reduced down to 285 V at the base vacuum value of $10^{-6}$ torr, whreras it was about 328 V at the base vacuum value of $10^{-3}$ torr.

• Food Science and Biotechnology
• /
• v.15 no.4
• /
• pp.559-563
• /
• 2006

The growth responses of six bacterial strains exposed to materials extracted from turmeric (Curcuma longa) rhizomes were examined using impregnated paper disk agar diffusion. Methanol extracts of turmeric rhizomes exhibited strong inhibitory activity against Clostridium perfringens and weak inhibitory activity toward Escherichia coli at 5 mg/disk. However, in tests conducted with Bifidobacterium adolescentis, B. bifidum, B. longum, and Lactobacillus casei, the methanol extract showed no inhibitory response. The biologically active constituent isolated from the turmeric rhizomes extracts was characterized as ar-turmerone using various spectroscopic analyses including EI-MS and NMR. The responses varied according to the dosage, chemicals, and bacterial strain tested. At 2 and 1 mg/disk, ar-turmerone strongly inhibited the growth of C. perfringens and moderately inhibited the growth of E. coli without any adverse effects on the growth of four lactic acid-bacteria. Of the commercially available compounds originating from turmeric rhizomes, curcumin exhibited strong and moderate growth inhibition against C. perfringens at 2 and 1 mg/disk, respectively, and weak growth inhibition against E. coli at 1 mg/disk. However, little or no activity was observed for borneol, 1,8-cineole, and sabinene against all six bacteria strains tested. The observed inhibitory activity of the turmeric rhizome-derived curcumin and ar-turmerone against C. perfringens and E. coli demonstrate one of the important pharmacological activities of turmeric rhizomes.

• Nutritional Sciences
• /
• v.9 no.4
• /
• pp.330-334
• /
• 2006

Chemical composition of the Eucommia ulmoides bark, including extractives, proximate, mineral, fatty acid and monosaccharide compositions, was studied The most abundant mineral was calcium (533.17 mg/l00 g). $\alpha-linolenic$ acid (24.7%) and linoleic acid (24.3%), showed higher contents among the fatty acids. Major monosaccharides of E. ulmoides balk were arabinose (13.94 mg/g), xylose (18.91 mg/g) and glucose (119.7 mg/g). From the bark of E ulmoides, four compounds were isolated and their structures were elucidated as caffeic acid (I), kaempferol (II), quercetin (III) and isoquercitrin (IV) by spectroscopic analysis such as NMR and MS, including cellulose TLC and other chemical evidence such as hydrolyzation and acetylation. The antioxidant activities of four isolated compounds were evaluated by DPPH free radical scavenging, hydroxyl scavenging and reducing power assays. The results indicated that all the isolated compounds showed higher DPPH radical scavenging activity than $\alpha-tocopherol$ and BHT that were used as positive controls and these four compounds exhibited considerable reducing power and hydroxyl radical (OH) scavenging activity. Considering from the results above, it suggests that the E. ulmoides bark is a potential natural source of antioxidant material.

• Korean Journal of Materials Research
• /
• v.22 no.6
• /
• pp.309-315
• /
• 2012

Metal foam has many excellent properties, such as light weight, incombustibility, good thermal insulation, sound absorption, energy absorption, and environmental friendliness. It has two types of macrostructure, a closed-cell foam with sealed pores and an open-cell foam with open pores. The open-cell foam has a complex macrostructure consisting of an interconnected network. It can be exploited as a degradable biomaterial and a heat exchanger material. In this paper, open cell Mg alloy foams have been produced by infiltrating molten Mg alloy into porous pre-forms, where granules facilitate porous material. The granules have suitable strength and excellent thermal stability. They are also inexpensive and easily move out from open-cell foamed Mg-Al alloy materials. When the melt casting process used an inert gas, the molten magnesium igniting is resolved easily. The effects of the preheating temperature of the filler particle mould, negative pressure, and granule size on the fluidity of the open cell Mg alloy foam were investigated. With the increased infiltration pressure, preheat temperature and granule sizes during casting process, the molten AZ31 alloy was high fluidity. The optimum casting temperature, preheating temperature of the filler particle mould, and negative pressure were $750^{\circ}C$, $400-500^{\circ}C$, and 5000-6000 Pa, respectively, At these conditions the AZ31 alloy had good fluidity and castability with the longest infiltration length, fewer defects, and a uniform pore structure.

• Korean Journal of Plant Resources
• /
• v.6 no.2
• /
• pp.171-179
• /
• 1993

This study was conducted to investigate the effect of growth regulators and medium composition on the growth of each stage in apical meristem culture for mass propagation of Zanthoxylum piperitum var. inerme Makino. The source material, shoot tip segments were taken from three-years old graft trees. Apical meristems were cultured in vitro on basal MS, GD, WS, half strength MS(1/2MS) and half strength GD(1/2GD) media supplemented with various concentrations for growth regulators(BA, IBA) and inorganic nutrients. The results summarized are as follows: 1. In culture establishment stage, ratio of culture establishment was 96.7% and the best resuit was obtained using MS medium supplemented with 1.0mg/l BA and 0.2mg/l IBA. 2. In shoot multitication stage, both shoot multiplication and growth were achieved in average 5.6cm. These results were obtained on in MS medium supplemented with 1.0mg/l BA and 0.2mg/l IBA. 3. In roothing stage, phloroglucinol(PG) acted as IBA synergist in root initiation. The most faverable combinations for root development was half-strength MS medium supplemented with 162mg/l PG and 0.2mg/l IBA, and ratio of rooting was 58.0%. 4. In Vitro formed plantlets were transplanted to paper pots in greenhouse with 85% of relative humidity. 96% of survival rate was obtained from artificial soil mix having same volume of sand, vermiculite, peat, and soil.

• Journal of Environmental Health Sciences
• /
• v.27 no.1
• /
• pp.27-35
• /
• 2001

This aim of the work presented in this paper is to investigate the factors that affcet chlorine decay and to develop functional relationships that can be used to enhance the durability of network models. predictive relationships were established that correlated the rate of chlorine decay to the various water conditions such as DOC, N $H_3$-N, initial chlorine, contact time, temperature and pH values. Free chlorine residual decreased with increasing temperature, DOC, N $H_3$-N, reaction time and chlorine dose. At 2$0^{\circ}C$, pH 7, The initial chlorine demand per mg as DOC/L and mg as N $H_3$-N/L was about 0.43, 2.69 mg/$\ell$ respectively at 180 minutes contact time. The Reaction between chlorine and humic acids was lasted intil 48hr, but the reaction between chlorine and N $H_3$-N was almost completed in 180 min. When the temperature is raised by 1$0^{\circ}C$, chlorine is more consumed about 0.25 mg/$\ell$ in the absence of organic substances and it is more consumed about 3.4 mg/$\ell$ in the presence of humic acid (5 mg/$\ell$) in water at pH 7 for 180 min. Regression Analysis created the resulting prediction equation for the chlorine decay in a SPSS package of the computer system. The model is as follows; $C_{t}$=1.239+0.707(Co)-0.000529(Time)-0.0112(Temp)+0.02227(pH)-0.42(DOC)-2.132(N $H_3$-N).).

• Journal of Environmental Health Sciences
• /
• v.30 no.5 s.81
• /
• pp.455-468
• /
• 2004

The purpose of this paper is to understand the time series and origin of a chemical component and to compare the difference during yellow sand episodes for analysis $PM_{10}$ chemical components in the region of west in Korean Peninsula, 1999-2001. An annual mean concentration of $PM_{10}$ is $29.1\;{\mu}g/m^3$. A monthly mean and standard deviation of $PM_{10}$ concentration are very high in spring but there is no remarkably seasonal variation. Also, water soluble ionic component of $PM_{10}$ be influenced by double more total anion than total cation, be included $NO_{3}^-\;and\;SO_{4}^{2-}$ for the source of acidity and $NH_{4}^+$ to neutralize. Tracer metals of $PM_{10}$ slowly increases caused by emitted for soil and ocean (Fe, Al, Ca, Mg, Na) and Zn, Pb, Cu, Mn for anthropogenic source. According to method of enrichment factor (E.F) and statistics, assuming that the origin of metal component in $PM_{10}$ most of element in the Earth's crust e.g. Mg, Ca, Fe originates soil and Cu, Zn, Cd, Pb derives from anthropogenic sources. The ionic component for $Na^{+}\;Cl^-,\;Mg^{2+}\;and\;Ca^{2+}$ and Mg, Al, Ca, Fe originated by soil component largely increase during yellow sand period and then tracer metal component as Pb, Cd, Zn decrease. According to factor analysis, the first group is ionic component ($Na^+,\;Mg^{2+},\;Ca^{2+}$) and metal component (Na, Fe, Mn and Ni) be influenced by soil. The second group, Mg, Cr also be influenced by soil particle.

• Health Policy and Management
• /
• v.9 no.3
• /
• pp.70-94
• /
• 1999

This paper was performed for a cost-effectiveness analysis of pharmacologic treatment of hypercholesterolemia. Agents modeled were cholestyramine, gemfibrozil. bezafibrate, lovastatin, pravastatin, simvastatin. Pharmacologic effectiveness was estimated by regression from reported clinical trials. Pharmacologic effects were expressed as the percent change of blood cholesterol level. Cost estimates included patients' travel expenses and time loss as well as resource consumption in the health care sector. Bezafibrate was the most efficient agent for reducing total cholesterol levels, having an cost over 1 year of ￦31.400 per percent reduction in total cholesterol. Simvastatin (10mg/d) was also efficient(￦33,100 per percent reduction). Chole styramine(8g/d) was least efficient at ￦90,200. For low-density lipoprotein cholesterol. simvastatin(10mg/d) was most efficient, at ￦23,200 per percent reduction, followed by lovastatin(20mg/d) at ￦28,000. Gemfibrozil was least efficient at ￦77,800 per percent reduction. For high-density lipoprotein cholesterol. bezafibrate(400mg/d) was most efficient at ￦39,300 per percent increase of high-density lipoprotein cholesterol. Cholestyramine was least efficient at ￦514,700. Analyses combining low-density lipoprotein cholesterol and high-density cholesterol effects suggest that bezafibrate(600mg/d) and simvastatin (10mg/d) were most efficient for reducing cardiovascular risk. The cost-effectiveness analysis results show that both simvastatin and bezafibrate could be efficient treatment. Simvastatin provide more effective treatment at higher cost, whereas bezafibrate is more cost-effective, as it may be less effective, at lower cost. Therefore, clinicians should choose reasonable treatment according to the patient's needs This pharmacoeconimc analysis will provide a guideline for efficient pharmacologic treatment and also be reference data for pricing new drugs.

• Journal of Environmental Science International
• /
• v.19 no.2
• /
• pp.217-227
• /
• 2010

This paper was studied $CO_2$ respiration rate with physicochemical properties of soils at wetland, paddy field and forest in Nongju-ri, Haeryong-myeon, Suncheon city, Jeollanam-do. Soil temperature and $CO_2$ respiration rate were measured at the field, and soil pH, moisture and soil organic carbon were analyzed in laboratory. Field monitoring was conducted at 6 points (W3, W7, W13, W17, W23, W27) for wetland, 3 points (P1, P2, P3) for paddy field and 3 points (F1, F2, F3) for forest in 10 January 2009. $CO_2$ concentrations in chamber were measured 352~382 ppm for wetland, 364~382 ppm for paddy field and 379~390 ppm for forest, and the average values were 370 ppm, 370 ppm and 385 ppm, respectively. $CO_2$ respiration rates of soils were measured $-73{\sim}44\;mg/m^2/hr$ for wetland, $-74{\sim}24\;mg/m^2/hr$ for paddy field and $-55{\sim}106\;mg/m^2/hr$ for forest, and the average values were $-8\;mg/m^2/hr$, $-25\;mg/m^2/hr$ and $38\;mg/m^2/hr$. $CO_2$ was uptake from air to soil in wetland and paddy field, but it was emission from soil to air in forest. $CO_2$ respiration rate function in uptake condition increased exponential and linear as soil temperature and soil organic carbon. But, it in emission condition decreased linear as soil temperature and soil organic carbon. $CO_2$ respiration rate function in wetland decreased linear as soil moisture, but its in paddy and forest increased linear as soil moisture. $CO_2$ respiration rate function in all sites increased linear as soil pH, and increasing rate at forest was highest.