• 한국항공우주학회지
• /
• 제35권5호
• /
• pp.390-396
• /
• 2007

본 연구에서는 새의 날개운동을 모사하기 위하여 스마트 재료를 이용한 플래핑 날개를 설계 및 제작하였다. 날개는 복합재료 프레임과 유연한 PVC 표피 그리고 표면 작동기로 구성되어 있으며, 주요 날개운동으로서 날갯짓, 비틀림 그리고 캠버 운동을 선정하였다. 날개의 캠버를 변화시키기 위하여 Macro-Fiber Composite를 표면작동기로서 적용하였으며, 압전-열 관계식을 이용하여 MFC의 구조 응답을 해석하였다. 양력과 추력을 동시에 측정하기 위하여 두개의 로드셀로 구성된 시험대를 제작하였으며, 공기역학적 특성을 평가하기 위하여 풍동실험을 수행하였다. 실험결과로부터 주요 양력은 기체의 전진속도와 피치각에 의존되며, 추력은 날갯짓 주파수에 의존됨을 확인하였다. 또한 MFC 작동기를 이용한 캠버효과를 통하여 정적조건에서 24.4%와 동적조건에서 20.8%의 충분한 양력증가를 확인할 수 있었다.

• 한국전산구조공학회논문집
• /
• 제23권1호
• /
• pp.9-15
• /
• 2010

본 논문에서는 압전복합재 작동기가 표면에 부착된 Hull 구조물의 유한요소모델을 구성하여 동적 특성을 고찰하였으며, 구조물의 진동제어 특성을 평가하였다. Hull 구조물은 양 끝이 닫혀있는 실린더형 쉘 구조물을 고려하였으며, 항공기 동체나 잠수함과 같은 수중 구조물 등의 간단한 모델로 사용될 수 있다. 구조물의 진동제어를 위해 최근 NASA Langley 연구소에서 개발된 압전복합재인 Macro-Fiber Composite(MFC)를 적용하였다. MFC는 압전세라믹 섬유를 이용하여 유연성을 향상시키고, 맞물림 전극을 적용하여 면내 방향에서 큰 압전효과를 구현할 수 있도록 하였다. 유한요소모델을 바탕으로 구조물의 지배방정식을 도출하였으며, 동적 특성을 해석하여 실제 제작된 구조물의 실험결과와 비교 검증하였다. 최적제어 알고리즘을 구성하여 구조물의 진동제어 성능을 평가하였으며, 효과적으로 구조물의 진동을 제어할 수 있음을 확인하였다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2007년도 춘계학술대회논문집
• /
• pp.75-80
• /
• 2007

This paper is concerned with the dynamic modeling and controller design for a cylindrical shell equipped with MFC actuators. The dynamic model was derived by using Rayleigh-Ritz method based on Donnel-Mushtari shell theory. The actuator and sensors for the MFC actuator equations were derived based on pinforce model. The boundary conditions at both ends were assumed to be shear diaphragm. After calculating the natural vibration characteristics, the positive position feedback controller was designed to cope with the first two modes. To this end, the equations of motion were reduced to modal equations of motion by considering the modes of interest. The theoretical results show that vibrations can be successfully suppressed.

• 한국세라믹학회지
• /
• 제41권3호
• /
• pp.216-220
• /
• 2004

본 논문은 압전세라믹의 압전상수 d$_{33}$ 를 이용한 적층 세라믹 박판 작동층 IDEAL (InterDigitated Electrode Actuation Layer)의 개발에 관한 것이다. 대부분의 박판 압전 작동층은 압전상수 d$_{31}$ 효과를 이용하고 있다. 현재 개발된 압전작동기의 성능을 향상시키기 위해 많은 연구가 수행 중에 있으며, 그 중 한 방법이 압전상수 d$_{33}$ 를 이용하는 방법이다. 압전세라믹의 압전상수 d$_{33}$ 는 압전상수 d$_{31}$ 보다 일반적으로 두배 정도이기 때문에 d$_{33}$ 작동 효과를 활용하면 작동기의 성능을 향상시킬 수 있다. 미국 MIT에서 개발된 AFC와 NASA Langley 연구소 연구팀이 개발한 LaRC-MFC$^{TM}$는 d$_{33}$ 작동 효과를 활용하였으나 빗살형 전극이 작동층 상하 표면에 부착되어 있어 완전한 d$_{33}$ 작동 효과를 활용하였다고 볼 수 없다. 본 논문에서는 빗살형 전극을 세라믹 층간에 삽입한 적층형 세라믹 박판 작동층을 설계하고 제작하였다. 제작된 작동층의 작동 스트레인을 측정하였고 LaRC-MFC$^{TM}$의 작동 스트레인과 비교한 결과, 본 연구에서 개발한 박판 세라믹 작동층이 15% 이상의 작동 스트레인을 발생시킬 수 있음을 확인하였다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2006년도 춘계학술대회논문집
• /
• pp.1229-1234
• /
• 2006

This paper is concerned with the dynamic modeling and controller design for a cylindrical shell equipped with MFC actuators. The dynamic model was derived by using Ravleigh-Ritz method based on Donnel-Mushtari shell theory. The boundary conditions at both ends were assumed to be shear diaphragm. To verify the theoretical results, a cylindrical shell structure made of aluminum was built ana tested by using impact hammer. Experimental results show that there are little discrepancies compared to theoretical results because of the boundary conditions at both ends. The MFC actuators were glued to the cylindrical shell in longitudinal and circumferential directions. The PPF controller were designed for lowest two modes and applied to the MFC actuators. The experimental results show that vibrations can be successfully suppressed.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2008년도 춘계학술대회논문집
• /
• pp.299-304
• /
• 2008

Dynamic characteristics of smart hull structure are investigated and active vibration control performance is evaluated. Dynamic model of smart hull structure with surface bonded Macro-fiber Composite (MFC) actuators is established by analytical method. Equations of motion of the host hull structure are derived based on Donnell-Mushtari equilibrium equations for a thin cylindrical shell. A general model for the interaction between hull structure and MFC actuator is included in the dynamic model. Modal analysis is then conducted and mode shapes and corresponding natural frequencies are investigated. After constructing of the optimal control algorithm, active vibration control performance of the proposed system is evaluated. It has been shown that structural vibration can be reduced effectively with proper control input.

• 한국소음진동공학회논문집
• /
• 제18권8호
• /
• pp.832-840
• /
• 2008

Dynamic characteristics of smart hull structure are investigated and active vibration control performance is evaluated. Dynamic model of smart hull structure with surface bonded macro-fiber composite(MFC) actuators is established by analytical method. Equations of motion of the host hull structure are derived based on Donnell-Mushtari equilibrium equations for a thin cylindrical shell. A general model for the interaction between hull structure and MFC actuator is included in the dynamic model. Modal analysis is then conducted and mode shapes and corresponding natural frequencies are investigated. After constructing of the optimal control algorithm, active vibration control performance of the proposed system is evaluated. It has been shown that structural vibration can be reduced effectively with proper control input.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2007년도 추계학술대회논문집
• /
• pp.565-573
• /
• 2007

This paper is concerned with the dynamic modeling, active vibration controller design and experiments for a cylindrical shell equipped with MFC actuators. The dynamic model was derived by using Rayleigh-Ritz method based on Donnel-Mushtari shell theory. The actuator and sensors for the MFC actuator equations were derived based on pin-force model. The equations of motion were then reduced to modal equations of motion by considering the modes of interest. The sensor equations were also converted to a reduced form. An aluminum shell was fabricated to demonstrate the effectiveness of modeling and control techniques. The boundary conditions at both ends of the shell were assumed to be shear diaphragm. Theoretical natural frequencies were calculated and compared to experimental result. It was observed that the theoretical result is in good agreement with experimental result for the first two modes. The multi-input and multi-output positive position feedback controller, which can cope with first two modes, was then designed based on the blockinverse theory and implemented using DSP. It was found from experiment that vibrations can be successfully suppressed.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2006년도 추계학술대회논문집
• /
• pp.457-462
• /
• 2006

This paper is concerned with the active vibration control experiment on cylindrical shell equipped with Macro Fiber Composite(MFC) actuators. The MFC actuators were glued to the cylindrical shell in circumferential directions. To verify the theoretical result, vibration test using impact hammer and accelerometer was carried out. It was found from experiments that theoretical result predicts experimental result to some extent. The positive position feedback controllers were designed and applied to the test article. It was observed that the resonant amplitude of the fundamental mode was reduced by 20dB thus achieving active vibration control. The active vibration control of the response subject to non resonant excitation has been of interest. We developed the combination of the positive position feedback controller which can cope with the fundamental mode and the positive position feedback controller which can counteract the external disturbance with non resonant frequency. It was found from experiments that the hybrid controller can suppress the vibration amplitude successfully.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2006년도 춘계학술대회논문집
• /
• pp.650-655
• /
• 2006

Dynamic modeling and active vibration control of smart hull structure using Macro Fiber Composite (MFC) actuator is conducted. Finite element modeling is used to obtain equations of motion and boundary effects of smart hull structure. Modal analysis is carried out to investigate the dynamic characteristics of the smart hull structure, and compared to the results of experimental investigation. Negative velocity feedback control algorithm is employed to investigate active damping of hull structure. It is observed that non-resonant vibration of hull structure is suppressed effectively by the MFC actuators.