• 대한기계학회논문집
• /
• 제18권3호
• /
• pp.540-547
• /
• 1994

Contact and frictional locking conditions and the effect of shielding due to contact at the facet, which could be represented by the difference in energy release rate, as a function of phase angle of loading are analyzed in this study for the case of interfacial cracks by assuming single crack-kink model. The analysis of contact effects on interfacial fracture resistance shows that relative shielding increases as the shear component was increased, which indicates a qualitative agreement with the previous experimental results.

• 한국세라믹학회지
• /
• 제34권9호
• /
• pp.921-926
• /
• 1997

Two NbCx-C1-x/Y2O3/Ti sputter-coated Al2O3 substrates (L 5.5 cm$\times$W 0.5 cm) were diffusion bonded together using hot press method at 95$0^{\circ}C$ for 3 hours under 1 MPa of applied pressure. 4 points bending tests were used to evaluate the mechanical performance of these precracked laminate beams. Two types of mechanical responses were observed: crack penetration through the interface for x=0.75, 1 and crack deflection into an interface for x=0.25, 0.5. The Al2O3/NbCx-C1-x/Y2O3/Ti system suggested here has been proves to be effective for the thermokinetical stability and tailorability of the interfaces of Al2O3/Ti composites at 95$0^{\circ}C$.

• Carbon letters
• /
• 제11권2호
• /
• pp.102-106
• /
• 2010

In this work, the effect of aminized multi-walled carbon nanotubes (NH-MWNTs) on the mechanical interfacial properties of epoxy nanocomposites was investigated by means of fracture toughness, critical stress intensity factor ($K_{IC}$), and impact strength testing, and their morphology was examined by scanning electron microscope (SEM). It was found that the incorporation of amine groups onto MWNTs was confirmed by the FT-IR and Raman spectra. The mechanical interfacial properties of the epoxy nanocomposites were remarkably improved with increasing the NH-MWNT content. It was probably attributed to the strong physical interaction between amine groups of NH-MWNTs and epoxide groups of epoxy resins. The SEM micrographs showed that NH-MWNTs were uniformly embed and bonded with epoxy resins, resulted in the prevention of the deformation and crack propagation in the NH-MWNTs/epoxy nanocomposites.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2002년도 추계학술발표대회 논문집
• /
• pp.252-256
• /
• 2002

본 연구에서는 유리섬유/나일론 6 복합재료의 계면특성에 미치는 실란계 사이징제의 영향을 조사하기 위하여 microbonding test, short-beam shear test 그리고 dynamic mechanical analysis 방법을 사용하였다. 전자의 미시적인 방법과 후자의 두 가지 거시적인 접근 방법으로부터 얻은 유리섬유/나일론 6 복합재료의 계면특성에 대한 결과가 서로 일치하였다. 상업적으로 사이징 처리된 경우와 비교할 때, 본 연구에 적용된 네 종류의 실란계 사이징제는 유리섬유-나일론 6 수지의 계면결합력을 크게 향상시켰다. 특히, 3-chloropropyltrimethoxysilane (Z-6076)의 사용은 유리섬유/나일론 6 복합재료의 계면전단강도와 층간전단강도를 가장 두드러지게 증가시켰다.

• Coupled systems mechanics
• /
• 제9권5호
• /
• pp.473-498
• /
• 2020

This paper presents a careful theoretical investigation into interfacial stresses in reinforced concrete foundation beam repairing with composite plate. The essential issue in the analysis of reinforced structures with composite materials is to understand the individual behaviour of each material and its interaction with the remaining ones. The present model is based on equilibrium and deformations compatibility requirements in and all parts of the repaired RC foundation beam, i.e., the reinforced concrete foundation beam, the composite plate and the adhesive layer. The theoretical predictions are compared with other existing solutions, By comparisons between the existing solutions and the present new solution enable a clear appreciation of the effects of various parameters such as the geometric characteristics and mechanical properties of the components of the repaired beam, as well as the geotechnical stresses of the soil are considered. This research is helpful for the understanding on mechanical behaviour of the interface and design of the composite-concrete hybrid structures.

• Macromolecular Research
• /
• 제13권4호
• /
• pp.306-313
• /
• 2005

Surface modified nanofillers are often used as curative-cum reinforcing agents for functional polymers. The polymer nanofiller interaction depends on the curative systems used. In the present study the carboxylic group of the carboxylated nitrile elastomer participated in the reaction with Zn-ion coated nanosilica filler producing a type of ionomeric elastomer. The interaction at the molecular level thus produced a high modulus vulcanizate. In this case, the S and MBT system, as curative, had an edge over the MDA and DPG curative system. Interfacial adhesion was enhanced in the presence of Zn-ion-coated nanosilica filler associated with dynamic mechanical behavior. The inferior properties obtained in the case of the MDA and DPG curative system were due to the decreased reactivity of the silica surface, thus reducing interfacial adhesion.

• 대한기계학회논문집
• /
• 제16권2호
• /
• pp.200-206
• /
• 1992

The effect of fiber diameter and gauge length on pull-out test for the interfacial properties in fiber reinforced resin composites have been investigated and these results have been arranged as statistical analysis. The fiber and matrix resins used for this study were stainless steel fiber (SUS316) and carbon fiber (high strength type), epoxy and high density polyethylene resin. From this study, it has been found that shear strength are constant regardless of gauge length of pull-out test and coefficient of variation depend on fiber diameter. In addition, it has been found that the interfacial shear strength decreased with the increasing fiber diameter, and in all case, Weibull parameter (m) has approximately 1.2/C.O.V.

• 비파괴검사학회지
• /
• 제28권6호
• /
• pp.504-511
• /
• 2008

This paper proposes an ultrasonic measurement method for measurement of linear interfacial stiffness of contacting surface between two steel plates subjected to nominal compression pressures. Interfacial stiffness was evaluated by using shear waves reflected at contact interface of two identical solid plates. Three consecutive reflection waves from solid-solid surface are captured by pulse-echo method to evaluate the state of contact interface. A non-dimensional parameter defined as the ratio of their peak-to-peak amplitudes are formulated and used to calculate the quantitative stiffness of interface. Mathematical model for 1-D wave propagation across interfaces is developed to formulate the reflection and transmission waves across the interface and to determine the interfacial stiffness. Two identical plates are fabricated and assembled to form contacting surface and to measure interfacial stiffness at different states of contact pressure by means of bolt fastening. It is found from experiment that the amplitude of interfacial stiffness is dependent on the pressure and successfully determined by employing pulse-echo ultrasonic method without measuring through-transmission waves.

• 폴리머
• /
• 제27권2호
• /
• pp.91-97
• /
• 2003

각기 다른 온도에서 불소화 표면처리에 의한 실리카의 표면특성을 X-선 광전 분광법 그리고 접촉각을 통해 관찰하였으며, 복합재료의 기계적 계면물성과 열안정성에 미치는 영향은 인열 에너지와 분해 활성화 에너지를 통해 고찰하였다. 실리카 표면 자유 에너지의 London 비극성 요소와 불소작용기는 불소화 처리 온도에 따라 증가하였으며, 결과적으로 실리카/폴리우레탄 복합재료의 인열 에너지를 향상시켰다. 또한 복합재료의 열안정성은 불소화 함량에 따라 증가하였다. 이러한 결과는 실리카 표면에 도입된 불소작용기가 본 실험의 복합재료 시스템 내에서 실리카와 폴리우레탄 계면 사이의 분자간 상호작용을 향상시키는 주요한 인자로 작용한 것으로 사료된다.

• Composites Research
• /
• 제15권6호
• /
• pp.16-23
• /
• 2002

본 연구에서는 양극산화 처리에 따른 고강도 PAN계 탄소섬유의 표면 특성 변화가 기계적 계면 물성에 미치는 영향을 조사하였다. 탄소섬유의 표면성질은 산.염기도, SEM, XPS, 그리고 접촉각 측정을 통하여 알아보았으며, 복합재료의 기계적 계면 특성은 ILSS와 $K_{IC}$를 통하여 고찰하였다. 탄소섬유 표면의 산도와 $O_{ls}/C_{IC}$가 증가하였는데, 이는 산소관능기의 발달에 기인하고, 양극산화된 탄소섬유의 표면자유에너지의 증가는 극성요소의 증가에 기인하는 것으로 사료된다. ILSS와 $K_{IC}$ 같은 기계적 계면 성질은 양극산화로 향상되어졌는데, 이러한 결과는 좋은 젖음성이 최종 복합재료의 섬유와 에폭시 수지 매트릭스 사이의 계면결합력을 증가시기는 중요한 역할을 하기 때문으로 사료된다.