• Atmosphere
• /
• v.25 no.3
• /
• pp.511-520
• /
• 2015

Existing studies on radar rainfall uncertainties were performed to reduce the uncertainty for each stage by using bias correction during the quantitative radar rainfall estimation process. However, the studies do not provide quantitative comparison with the uncertainties for all stages. Consequently, this study proposes a suitable approach that can quantify the uncertainties at each stage of the quantitative radar rainfall estimation process. First, the new approach can present initial and final uncertainties, increasing or decreasing the uncertainty, and the uncertainty percentage at each stage. Furthermore, Maximum Entropy (ME) was applied to quantify the uncertainty in the entire process. Second, for the uncertainty quantification of radar rainfall estimation at each stage, this study used two quality control algorithms, two rainfall estimation relations, and two bias correction techniques as post-processing and progressed through all stages of the radar rainfall estimation. For the proposed approach, the final uncertainty (ME = 3.81) from the ME of the bias correction stage was the smallest while the uncertainty of the rainfall estimation stage was higher because of the use of an unsuitable relation. Additionally, the ME of the quality control was at 4.28 (112.34%), while that of the rainfall estimation was at 4.53 (118.90%), and that of the bias correction at 3.81 (100%). However, this study also determined that selecting the appropriate method for each stage would gradually reduce the uncertainty at each stage. Finally, the uncertainty due to natural variability was 93.70% of the final uncertainty. Thus, the results indicate that this new approach can contribute significantly to the field of uncertainty estimation and help with estimating more accurate radar rainfall.

• Journal of the Korean Wood Science and Technology
• /
• v.28 no.2
• /
• pp.3-9
• /
• 2000

This study concerns the distribution and dependence of moisture content(MC) in wood for same thickness in different vapor transmission conditions. The specimens were disks of 70-mm in diameter and 20-mm in thickness from quartersawn lumber of Korean red pine(Pinus densiflora S. et Z.). The experiments were conducted in ten different conditions on the difference of the vapor pressures by the JIS Z-0208. The distribution of moisture content in wood can be illustrated by two straight lines intersecting at the point of about ten percent Me. On the other hand, when more or less than about 10 percent, the distribution of the Me can be illustrated by one straight lines. Therefore, it is considered that the values of 10 percent Me has no relation to the wood and experimental conditions. It's assumed that 10 percent is the boundary point at which the moisture sorption energy changes. In a previous study, diffusion coefficient is almost constant with no relation to a thickness of the woods for the constant experimental conditions. But, in this study, it seems that diffusion coefficient from the moisture gradient vary with the Me of wood in different vapor transmission conditions.

• Journal of KIISE:Software and Applications
• /
• v.33 no.4
• /
• pp.411-417
• /
• 2006

Motion Estimation (ME) is an important part of video coding process and it takes the largest amount of computation in video compression. Half-pixel and quarter-pixel motion estimation can improve the video compression rate at the cost of higher computational complexity In this paper, we suggest a new efficient low-complexity algorithm for half-pixel and quarter pixel motion estimation. It is based on the experimental results that the sum of absolute differences(SAD) shows parabolic shape and thus can be approximated by using interpolation techniques. The sub-pixel motion vector is searched from the minimum SAD integer-pixel motion vector. The sub-pixel search direction is determined toward the neighboring pixel with the lowest SAD among 8 neighbors. Experimental results show that more than 20% reduction in computation time can be achieved without affecting the quality of video.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 1995.06a
• /
• pp.131-135
• /
• 1995

As the search range increases, most fast ME algorithms can not keep the performance comparable to the full search BMA. In this paper, we propose a new fast motion estimation method which locates the small search area for a block of the current frame. This method is based on interframe correlation of motion vectors as well as intraframe correlation. Especially, the proposed algorithm outperforms other fast methods when the motion is very fast or complex. It drastically reduces computational complexity while maintaining good performance compared with the conventional FS-BMA.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.38 no.2
• /
• pp.138-148
• /
• 2001

Digital Video (DV) coding standards for digital video cassette recorder are based mainly on DCT and variable length coding. DV has low hardware complexity but high compressed bit rate of about 26 Mb/s. Thus, it is necessary to encode video with low complex video coding at the studios and then transcode compressed video into MPEG-2 for video-on-demand system. Because these coding methods exploit DCT, transcoding in the DCT domain can reduce computational complexity by excluding duplicated procedures. In transcoding DV into MPEC-2 intra coding, multiplying matrix by transformed data is used for 4:1:1-to-4:2:2 chroma format conversion and the conversion from 2-4-8 to 8-8 DCT mode, and therefore enables parallel processing. Variance of sub block for MPEG-2 rate control is computed completely in the DCT domain. These are verified through experiments. We estimate motion hierarchically using DCT coefficients for transcoding into MPEG-2 inter coding. First, we estimate motion of a macro block (MB) only with 4 DC values of 4 sub blocks and then estimate motion with 16-point MB using IDCT of 2$\times$2 low frequencies in each sub block, and finish estimation at a sub pixel as the fifth step. ME with overlapped search range shows better PSNR performance than ME without overlapping.

• Journal of Korean Society of Transportation
• /
• v.10 no.1
• /
• pp.55-62
• /
• 1992

교통수요는 교통정책 및 교통시설 계획의 수립 및 평가에 중요한 영향을 미치게 되므로 교통수요의 예측은 교통연구에서 중요한 부문을 차지하고 있다. 도로밑에 설치된 전자차량감지기(Electronic Vehicle Detector)로부터 자동 수집된 링크 교통량 자료(Traffic Counts)를 주요 입력자료로 이용하여 계획지역의 기종점 통행표(Origin Destination Trip Matrix)를 작성할 수 있는 기법 들이 최근 수년동안 많이 발달하게 되었다. 이러한 새로운 기법들은 가구조사(Home Inteview), 노변면접조사(Road-Side Interview)등을 토하여 조사된 자료를 기초로하는 전통적은 4단계 교통수요추정방법(Conventional 4-Stage Estimation Method)-통행발생(Generation), 통행분포(Distribution), 수단선택(Modal Split), 교통배분(Assignment)-과 비교하여 첫째로 정확도가 높은 링크 교통량 자료를 별도의 조사를 거치지 않고서도 수집이 가능하기 때문에 조사비용이 거의 들지 않아도 되어 경제적이고, 둘째로 전통적인 수요예측방법들에서 요구되어지는 복잡한 모형수립 및 계수조정(Parameter Calibration)이 필요하지 않아 간편하고 셋째로 오래전에 작성된 기종점 통행표를 단순히 링크 교통량 자료만을 이용하여 쉽게 보완할 수 있어 지속적인 자료의 축적(Data Age-ing)이 가능하며 더 나아 가서 소위 연속적인 교통 계획 및 교통시설관리(Continuous Transport Planning and Management)를 가능케 하는 등의 여러 장점 때문에 많은 주목을 받아 오고 최근 몇 년이 꾸준히 실무에 유용하게 적용이 되고 있는 실정이다. 본 연구는 링크 교통량자료를 이용하여 기종점 통행표를 작성하기 위하여 개발된 기존의 여러 기법들 가운데 특히 용량제약조건(Capacity-Restrained Condition)하에서 기존의 방법들을 상호 검토한 후 Wardrop의 교통망 평형원칙(Wardrop's First Network Equilibrium Principle)을 만족하는 새로운 추정기법을 제의하고 이의 시험결과를 논의하는 것을 주요내용으로 한다. 링크 교통량 자료를 이용하여 기종점 통행표를 작성하는 기법들의 근본 목표는 조사된 링크 교통량(Ob-served Traffic Counts)에 가장 근접한 교통망 통행 배정 링크 교통량(Assigned Link Volumes)을 재현(Re-producing)할 수 있는 기종점 통행표들 중에서 최적의 기종점 통행표를 발견하는 것이다. 따라서 교통망에서 통행자의 여행 경로 배정을 가장 잘 반영할 수 있는 현실적인(Realistic) 교통망 통행 배정 모형(Net-work Traffic Assignment Model)의 선택은 중요한 요소가 되며 특히 교통망에 교통체증(Traffic Conges-tion)이 심할 경우 교통망 통행자 평형조건(Network Traffic Equilibrium Condition)을 고려하기 위한 특별한 처리가 요구되어진다. 본 연구는 Whllumsen(Hall, Van Vliet and Willumsen, 1980)에 의하여 개발된 ME2(Maximum Entropy Matrix Estimation)기법에서 반복식 추정방법(Sequential Estimation Method)을 사용할 경우 Wardrop의 평형조건을 만족하는 기종점 통행표를 구할 수 없다는 단점을 극복하기 위한 방안으로서 엔트로피 극대화문제와 교통망 평형 조건(Entropy Maximisation and Network Equilibrium Condition)의 두 문제를 동시에 해결할 수 있는 새로운 수식모형과 이를 풀기 위한 알고리즘(Simultaneous Solution Algorithm)을 제의하였다. 제의된 수식모형과 알고리즘을 예제 교통망(Example Network)을 이용한 시험하고 그 결과를 ME2 의 반복식 추정 방법으로부터 구한 기종점 통행표와 비교 검토하였다.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.45 no.3
• /
• pp.20-29
• /
• 2008

In this paper, we propose a do-interlacing algorithm using integral projection-based motion estimation considering Region Of Interest(ROI). The proposed motion estimation method finds the motion of the given ROI accurately with low computational cost. In order to incorporate the motion estimation in do-interlacing, an entire image is first segmented into multiple ROIs according to the temporally predicted block-wise motion types and spatial positions. Then, motion vectors of respective ROIs are obtained by the integral projection method. In this paper, totally five ROIs, one for the global motion and four for the local motions, are made, and therefore, five motion vectors are produced for each field. By using the estimated motion vectors, motion compensation is performed for increasing the vortical resolution of the converted frames. Finally, do-interlaced frames are obtained by effectively combining the results of motion compensation and stable intra-field do-interlacing according to the reliability of motion compensation. Experimental results show that the proposed algorithm provides better image quality than existing algorithms in both subjective and objective measures.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2010.11a
• /
• pp.184-187
• /
• 2010

본 논문에서는 움직임 추정(Motion Estimation, ME), 색상 라벨링(Labeling) 그리고 Non-Local means 필터 등을 이용하여 2D 영상을 3D 입체 영상으로 변환하는 기법을 제안한다. 제안하는 기법에서는 프레임 간의 움직임 추정 방법을 사용하여 물체의 움직임 벡터를 추출하며 색상 라벨링 작업을 통해 세밀한 객체를 추출한다. 객체를 추출한 후 영상을 이동시켜서 우영상을 생성한다. 우 영상을 생성하는 과정에서 채워지지 않은 화소들이 발생하는데 전체 화소의 상관도를 고려하는 Non-local means 필터를 사용하여 이 부분을 처리한다. 생성된 우 영상과 원본 영상인 좌 영상으로 비월주사(interlace)하여 최종 3D 입체 영상을 생성한다.

• Proceedings of the KSME Conference
• /
• 2003.04a
• /
• pp.893-898
• /
• 2003

Coulomb friction is an important factor for precise position tracking control systems. The control systems with friction causes the steady state error because of being sensitive to the change of system condition and highly nonlinear characteristics. To overcome these problems, we use an estimation scheme of Coulomb friction to experiment for it's compensating. The estimated factor for Coulomb friction is used as a feed-forward compensator to improve the tracking performance of ball-screw systems. The tracking performance was improved by compensating the estimated friction torque in the feed-forward term. And, the sliding mode control which is derived from the Lyapunov stability theorem is applied for robust stability and reducing chattering. The experimental results show that the sliding mode controller with adaptive friction compensator has a good tracking performance compared with the friction uncompensated controller.

• Journal of Life Science
• /
• v.20 no.9
• /
• pp.1365-1372
• /
• 2010

We investigated the inhibitory effects of solvent extracts from dried yam on $H_2O_2$-induced oxidative stress and growth of cancer cell lines (HT1080 human fibrosarcoma and HT-29 human colon cancer cells). Yam (Dioscoreacea) has been recognized as a healthy food due to its various biological activities, such as anti-obesity, anti-constipation, anti-proliferation, and anti-mutagenic activities, as well as its ability to decrease blood glucose and cholesterol levels. In order to determine the protective effect on $H_2O_2$-induced oxidative stress, DCFH-DA (dichlorodihydrofluorescin diacetate) assay was conducted. Acetone with methylene chloride (A+M) extract of dried yam appeared to reduce the levels of intracellular reactive oxygen species (ROS) with dose responses. Among the fractions, 85% aq. methanol fraction showed the highest protective effect on production of lipid peroxides. Inhibitory effects of A+M and methanol (MeOH) extracts on the growth of HT1080 and HT-29 cancer cells increased in a dose dependent manner. The treatments of n-hexane, 85% aq. methanol and n-butanol fractions (${\geqq}0.5$ mg/ml concentrations) significantly inhibited the growth of both cancer cells (p<0.05). From these results, 85% aq. methanol fraction showed inhibitory effects on cellular oxidation and growth of human cancer cells, suggesting that this fraction may contain active compounds of dried yam.