• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 ITC-CSCC -3
• /
• pp.1428-1431
• /
• 2002

It is general opinion that the future mobile multimedia networks will use different standards and a prospective solution to this problem will be software defined radio (SDR) techniques. SDR provides the flexibility to support multiple air interfaces and signal processing functions at the same time. Especially, digital signal processors and FPGAs are widely used for implementation of these adaptive and flexible functions of a baseband modem for SDR applications. Also, it is known that the modulation schemes of OCQPSK (Orthogonal Complex QPSK) and HPSK (Hybrid PSK) are used for IMT-2000 services of cdma2000 and WCDMA, respectively. Thus, in this paper, we design and implement an OCQPSK / HPSK modem using a DSP chip of Texas Instrument's TMS320C6701. One modulation scheme is operated by adaptive selection between the two schemes and 5 physical traffic channels differentiated by orthogonal codes are implemented in one DSP chip and each channel has 1Mbps data rates and 8Mcps chip rates.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 춘계학술대회
• /
• pp.1114-1119
• /
• 2004

In a foaming process of microcellular plastics (MCPs) with a injection molding, research on the viscosity change that occurs when the gas is injected to the polymer has received little attention despite its importance. The purpose of this paper is to provide the basic data required to determine the processing condition by measuring viscosity changes against the gas injection rates of the blowing agent, and to verify the influence of the viscosity change on the flow condition of polymer inside the mold at the injection process.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 1998년도 춘계종합학술대회
• /
• pp.155-158
• /
• 1998

차세대 이동통신 서비스는 영상을 포함한 멀티미디어 서비스나 고속 데이터통신 서비스가 가능해야한다. 본 논문에서는 W-CDMA 방식을 이용한 IMT-2000 단말기의 주파수 합성기를 포함하는 송신부를 설계한다. 요구되는 성능은 채널간격 10MHz, 변ㆍ복조 방식은 QPSK, 데이터 전송속도는 4.096Mcps, 주파수 합성기는 19.2MHz의 기준 주파수로 2,200∼2,300MHz 및 140MHz/260MHz의 주파수를 만든다. 구현된 주파수 합성기 및 송신부가 IMT-2000단말기의 요구 성능을 만족함을 보이고, W-CDMA를 이용한 WLL, Wireless LAN등 다양한 무선장비에 이용될 것으로 기대된다.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2001년도 추계학술발표대회 논문집
• /
• pp.121-124
• /
• 2001

Surface-modified silica holds considerable promise in the development of advanced materials for good mechanical properties and stability. In this work, the surface and mechanical interfacial properties of silicas treated with silane coupling agents, such as Y-methacryloxy propyl trimethoxy silane (MPS). Y-glycidoxy propyl trimethoxy silane (GPS), and Y-mercapto propyl trimethoxy silane (MCPS), are investigated. The effect of silane surface treatments of silica on the surface properties and surface energetics are studied in terms of surface functional values and contact angle measurements. And their mechanical interfacial properties of the silica/rubber composites are studied by the composite tearing energy ($G_{IIIC}$). As a result. the mechanical interfacial properties are improved in the case of silane-treated composites compared with untreated one. It reveals that the functional groups on silica surface by silane surface treatments play an important role in improving the degree of adhesion at interfaces in a silica-filled rubber system.

• Journal of Computing Science and Engineering
• /
• 제10권3호
• /
• pp.75-84
• /
• 2016

Medical cyber-physical systems (MCPS) integrate sensors, actuators, and software to improve patient safety and quality of healthcare. These systems introduce major challenges to safety analysis because the patient's physiology is complex, nonlinear, unobservable, and uncertain. To cope with the challenge that unidentified physiological parameters may exhibit short-term variances in certain clinical scenarios, we propose a novel run-time predictive safety monitoring technique that leverages a maximal model coupled with online training of a computational virtual subject (CVS) set. The proposed monitor predicts safety-critical events at run-time using only clinically available measurements. We apply the technique to a surgical glucose control case study. Evaluation on retrospective real clinical data shows that the algorithm achieves 96% sensitivity with a low average false alarm rate of 0.5 false alarm per surgery.

• 한국항행학회논문지
• /
• 제2권2호
• /
• pp.116-125
• /
• 1998

최근의 이동 통신 시스템용 전력 증폭기는 고전력, 고효율 특성을 가지며 또한 저왜곡 특성을 갖도록 요구되고 있다. 디지털 통신 시스템의 전력 증폭기는 상호 변조와 스펙트럼 재성장에 의한 인접 채널 간섭이 생기게 되며, 특히 광대역 디지털 통신 시스템에서는 인접채널 전력비 특성이 중요하게 이용되고 있다. 전력 증폭기의 통신 시스템에 대한 영향을 분석하기 위해 22Mcps로 대역 확산된 광대역 디지털 변조 신호원을 구현하고, ISM 밴드를 이용한 전력 증폭기를 설계하여 RZ, NRZ등 코딩방법에 따른 전력 증폭기의 비선형 특성인 인접채널 전력비 특성을 비교 시뮬레이션 및 측정하였다.

• 한국음향학회지
• /
• 제15권5호
• /
• pp.13-20
• /
• 1996

현재 신경회로망의 구현에 관한 여러 가지 연구가 진행되고 있으며, 이들 중 신경회로망의 VLSI 구현에 대한 연구가 매우 활발하다. 디지털 신경회로망은 느린 처리속도와 넓은 면적을 차지하는 점이 주요 단점으로 지적되는데 본 논문에서는 neural cell을 곱셈과 덧셈을 Binary Convolution 기법과 Counter를 사용하여 설계함으로써 속도를 높이고 단위 뉴런의 소요 Tr수를 줄여 그 소요 면적을 줄이도록 하였다. 본 cell의 구조를 이용하여 layer당 16개씩의 cell을 가지는 3-layer neural network을 구성하였을 경우 0.8${\mu}$ standard cell 설계시 50MHz까지 동작하였으며 26MCPS의 동작을 확보하였다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2006년도 춘계학술대회 논문집
• /
• pp.421-422
• /
• 2006

According to the industrialization the using of polymers is increased by their mechanical or commercial demands. At now, the using of polymers is become bigger and bigger than yet. On the other words, our whole life is covered by the polymers. Due to the extended polymer using, the material cost is higher and higher. Therefore, the people used the polymer foaming process using the gas. The polymer foaming using the pentane or butane gas is prohibited by the government cause of the explosiveness and non-environmental friendly. Therefore, the members of MIT invented the Micro-cellular Polymer Foaming in 1980. The Micro-cellular Polymers has many cells in the polymer matrix. By compare between non-foamed polymers, the Micro-cellular Polymers have low material cost, soundproof and shock less. The purpose of this study is to study the twice foamed polymer by batch process. To know the reaction by step of microcellular foaming process, we measure the density of polymer. And to viewing the cell morphology, we used the scanning electron microscopy(SEM).

• ETRI Journal
• /
• 제34권2호
• /
• pp.216-225
• /
• 2012

This paper presents a transceiver module for human body communications whereby a spread signal with a group of 64 Walsh codes is directly transferred through a human body at a chip rate of 32 Mcps. Frequency selective digital transmission moves the signal spectrum over 5 MHz without continuous frequency modulation and increases the immunity to induced interference by the processing gain. A simple receiver structure with no additional analog circuitry for the transmitter has been developed and has a sensitivity of 250 ${\mu}V_{pp}$. The high sensitivity of the receiver makes it possible to communicate between mobile devices using a human body as the transmission medium. It enables half-duplex communication of 2 Mbps within an operating range of up to 170 cm between the ultra-mobile PCs held between fingertips of each hand with a packet error rate of lower than $10^{-6}$. The transceiver module consumes 59 mA with a 3.3 V power supply.

• 정보보호학회논문지
• /
• 제6권4호
• /
• pp.3-38
• /
• 1996

The mobile station shall convolutionally encode the data transmitted on the reverse traffic channel and the access channel prior to interleaving. Code symbols output from the convolutional encoder are repeated before being interleaved except the 9600 bps data rate. All the symbols are then interleaved, 64-ary orthogonal modulation, direct-sequence spreading, quadrature spreading, baseband filtering and QPSK transmission. The sync, paging, and forward traffic channel except the pilot channel in the forward CDMA channel are convolutionally encoded, block interleaved, spread with Walsh function at a fixed chip rate of 1.2288 Mcps to provide orthogonal channelization among all code channels. Following the spreading operation, the I and Q impulses are applied to respective baseband filters. After that, these impulses shall be transmitted by QPSK. Authentication in the CDMA system is the process for confirming the identity of the mobile station by exchanging information between a mobile station and the base station. The authentication scheme is to generate a 18-bit hash code from the 152-bit message length appended with 24-bit or 40-bit padding. Several techniques are proposed for the authentication data computation in this paper. To protect sensitive subscriber information, it shall be required enciphering ceratin fields of selected traffic channel signaling messages. The message encryption can be accomplished in two ways, i.e., external encryption and internal encryption.