• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.29 no.3A
• /
• pp.209-216
• /
• 2009

The structural stability as well as economical efficiency of the wind sensitive structures are strongly dependant on accurate evaluation of the design wind speed. Present study demonstrates a useful wind data obtained at the wind monitoring tower in the Kwangyang Suspension Bridge site. Moreover the Measure-Correlate-Predict (MCP) method has been applied to estimate the long-term wind data at the bridge site based on the wind data at the local weather station. The measured data indicate that the turbulent intensities and roughness exponents are strongly affected by the wind direction and surrounding topography. The new design wind speed based on MCP method is 20m/s lower than that at the original estimation, and the resulting design wind load is only 36% of the old prediction. The field measurement of wind data is recommended to ensure the economical and secure design of the wind sensitive structures because the measured wind data reveal much different from the estimated one due to local topography.

• Journal of the Korean Solar Energy Society
• /
• v.33 no.5
• /
• pp.1-8
• /
• 2013

Wind resource data of short-term period has to be corrected a long-term period by using MCP method that Is a statistical method to predict the long-term wind resource at target site data with a reference site data. Because the field measurement for wind assessment is limited to a short period by various constraints. In this study, 2 different MCP methods such as Linear regression and Matrix method were chosen to compare the predictive accuracy between the methods. Finally long-term wind speed, wind power density and capacity factor at the target site for 20 years were estimated for the variability of wind and wind energy. As a result, for 20 years annual average wind speed, Yellow sea off shore wind farm was estimated to have 4.29% for coefficient of variation, CV, and -9.57%~9.53% for range of variation, RV. It was predicted that the annual wind speed at Yellow sea offshore wind farm varied within ${\pm}10%$.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2013.05a
• /
• pp.1097-1098
• /
• 2013

• Asian Pacific Journal of Cancer Prevention
• /
• v.16 no.16
• /
• pp.7243-7248
• /
• 2015

Background: Monocyte chemoattractant protein-1 (MCP-1) is a major chemokine thought to be responsible for monocyte and T-lymphocyte recruitment in acute inflammatory conditions and recruitment of macrophages in tumors. It is also implicated in cardiovascular disease, rheumatoid arthritis and chronic obstructive pulmonary disease. The aim of the present study was to investigate the correlation between MCP-1 -2518 A/G polymorphism and breast cancer risk in patients from Amritsar city of Punjab state in North-West India. Materials and Methods: We screened DNA samples of 200 sporadic breast cancer patients and 200 age and gender matched unrelated healthy individuals for MCP-1 -2518 A/G polymorphism using the PCR-RFLP method. Results: A significantly increased frequency of the GG genotype was observed in patients as compared to controls. Individuals carrying the MCP1 -2518GG genotype had a two fold risk for breast cancer (OR=2.06, 95%CI, 1.06-3.98; p=0.03). Genetic models analysis revealed a significant association between MCP-1 -2518 A/G polymorphism and cancer risk in homozygous co-dominant (OR=2.06, 95%CI, 1.06-3.98; p=0.03) and recessive (OR=1.97, 95%CI, 1.05-3.70; p=0.03) models. Conclusions: We conclude that the GG genotype of the MCP-1-2518 A/G polymorphism is associated with increased risk to breast cancer in Punjab, North-West India.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.18 no.6
• /
• pp.506-509
• /
• 2005

This paper presents the improved burn-in method for the reliability of SRAM in Multi Chip Package (MCP). Semiconductor reliability is commonly improved by the burn-in process. Reliability Problem is very significant in the MCP which includes over two chips in a package because the failure of one SRAM chip has a large influence on the yield and quality of the other chips such as Flash Memory, DRAM, etc. Therefore the quality of SRAM must be guaranteed. To improve the qualify of SRAM, we applied the improved wafer level burn-in process using multi cell selection method in addition to the previously used methods and it is found to be effective in detecting particular failures. Finally, with the composition of some kinds of methods, we achieved the high quality of SRAM in MCP.

• Horticultural Science & Technology
• /
• v.33 no.5
• /
• pp.675-686
• /
• 2015

Asparagus (Asparagus officinalis L.) needs proper post-harvest treatment to prolong its storage life. This study investigated the effect of 1-methylcyclopropene (1-MCP) on the quality and storage life of asparagus. Fresh-harvested asparagus was treated with 1-MCP ($1mg{\cdot}L^{-1}$), CEPA($10mg{\cdot}L^{-1}$), and 1-MCP($1mg{\cdot}L^{-1}$) + CEPA($10mg{\cdot}L^{-1}$) and compared with an untreated control. The carbon dioxide ($CO_2$) production, ethylene production, and morphological characteristics of the preserved asparagus were observed. The flow-system and the static-type measurement methods for ethylene and $CO_2$ production (respiration rate) were used. Weight loss, respiration rate, degree of freshness, and ethylene production were monitored during storage at $7^{\circ}C$. The results further showed that CEPA (2-chloroethylphosphonic acid) treatment had greater effects on $CO_2$ and ethylene production than using the 1-MCP process. The asparagus treated with CEPA or 1-MCP + CEPA had significantly increased the ethylene production rate compared to the control or using only 1-MCP during storage. There were no evident changes in the respiration rate of asparagus under 1-MCP treatment as compared with the control. Using the flow-system, slight differences in the rates of $CO_2$ and ethylene production were noted as compared to using the static type. Findings showed that in using the flow-system, asparagus manifested clearer results as compared with the static type. Weight loss in asparagus was significantly lower in control and 1-MCP treated samples than in those treated with CEPA. Likewise, the $CO_2$ and ethylene production of the CEPA treated samples significantly increased. The 1-MCP treatment reduced the effects of CEPA on weight loss, soluble solids content, and osmolality. The effect was not observed with exogenous ethylene as CEPA treatment had no visible effect as compared to the untreated group. Thus, 1-MCP treatment of asparagus could slightly reduce damage to the quality of asparagus during its distribution where ethylene gas is produced. Therefore, this study suggests that 1-MCP treatment can reduce the damage induced by ethylene gas on asparagus in poor distribution environments.

• Horticultural Science & Technology
• /
• v.30 no.6
• /
• pp.725-733
• /
• 2012

Effects of postharvest 1-methylcyclopropene (1-MCP) treatment, controlled atmosphere (CA) storage, and shelf temperature on quality of 'Gamhong' apples were analyzed during export simulation. Fruits were harvested at the optimum maturity for long-term storage, treated with $1{\mu}L{\cdot}L^{-1}$ 1-MCP for 16 hours, and then stored for 6 months under air and CA conditions at $0^{\circ}C$. Poststorage export procedure was performed by applying additional 2-week refrigerated storage and 7-day shelf-life test at 7 and $20^{\circ}C$, which simulated container shipment and local distribution, respectively. After storage and during export simulation, rates of respiration and ethylene evolution were significantly lower in 1-MCP treated and CA-stored apples. For the reduction of respiration, CA storage was more effective than 1-MCP treatment. Soluble solids content was maintained higher in 1-MCP treated apples, while titratable acidity was maintained better both in the 1-MCP treated and CA-stored apples. Effects of 1-MCP treatment and CA storage were highly significant in maintaining flesh firmness and sensory texture ratings. Additive effects from combined application of 1-MCP treatment and CA storage were occasionally observed. Shelf temperature during the local distribution simulation seemed not to significantly influence quality changes only showing limited effects on flesh firmness. Overall results suggest that storage potential of 'Gamhong' apples is shorter than 4 months in control fruit under refrigerated air conditions, whereas the potential can be extended to longer than 6 months by 1-MCP treatment and CA storage. Postharvest program should be provided considering the time of export, i.e. period of storage, and duration of local distribution.

• Nuclear Engineering and Technology
• /
• v.53 no.7
• /
• pp.2207-2220
• /
• 2021

Lead alloy is used as coolant in Lead-based cooled Fast Reactor (LFR). The natural characteristics of lead alloy are combined with the simple structural design of LFR. This constitutes the inherent safety characteristics of LFR. The main work of this paper is to take the main coolant pump (MCP) in the lead-cooled fast reactor (LFR) as the research object, and to study the flow pattern distribution of the internal flow field under the reverse rotation pump condition, the reverse rotation positive-flow braking condition and the reverse rotation negative-flow braking condition. In this paper, the double-outlet volute type and the space guide vane are selected as the potential designs of the CLEAR-I MCP. In this paper, the CFD method is used to study the potential reverse accident of the MCP. It is found that the highest flow velocity in the impeller appears at the impeller outlet, and the Q-H curves of the two design programs basically coincide. The space guide vane type MCP has better hydraulic performance under the reverse rotation positive-flow condition, the Q-H curves of the two designs gradually separate with increasing flow rate, and the maximum flow velocity inside the space guide vane type MCP is obviously lower than that of the double-outlet volute type. For the reverse rotation test of MCP, only the condition of the forward rotating pump of the main coolant pump is tested and verified. For the simulation of the MCP in LBE medium, it proved that the turbulence model and basic settings selected in the simulation are reliable.

• Journal of Ecology and Environment
• /
• v.34 no.4
• /
• pp.365-370
• /
• 2011

The water deer (Hydropotes inermis) is one of the most primitive extant deer of the family Cervidae. Unlike Chinese water deer, Korean water deer have rarely been studied, even though they have relatively well remained in Korea. In particular, the home range of the Korean water deer has not yet been studied. Here we estimated the home range of the Korean water deer using two different methods (GPS and radio tracking) and analyzed the home range according to sex, time, and season. The mean home range size of four individuals was 2.77 $km^2$ and 0.34 $km^2$ under the 95% minimum convex polygon (MCP) and the 50% kernel (K) method, respectively. There seemed to be a difference in home range size between males (3.30 $km^2$) and females (2.25 $km^2$) under the 95% MCP method. We also found a difference in home range size between day (1.90 $km^2$) and night (2.43 $km^2$) by 95% MCP method. In addition, a home range size difference was observed between summer (4.65 $km^2$) and spring (0.48 $km^2$) or fall (0.85 $km^2$) using the 95% MCP method. Water deer seemed to have a larger home range in night than in day, and males also have a larger home range. We presumed that the GPS tracking method of the code division multiple access system could be a very useful tool for understanding the ecology of the water deer using the radio tracking method. Using these tracking methods and through future research, we can better understand the habitat use pattern of these water deer.

• 한국신재생에너지학회:학술대회논문집
• /
• 2008.10a
• /
• pp.262-267
• /
• 2008

The long-term wind data are reconstructed from the short-term meteorological data to design the 4 MW offshore wind park which will be constructed at Woljeong-ri, Jeju island, Korea. Using two MCP (Measure-Correlate-Predict) models, the relative deviation of wind speed and direction from two neighboring reference weather stations can be regressed at each azimuth sector. The validation of the present method is checked about linear and matrix MCP models for the sets of measured data, and the characteristic wind turbulence is estimated from the ninety-percent percentile of standard deviation in the probability distribution. Using the Gumbel's model, the extreme wind speed of fifty-year return period is predicted by the reconstructed long-term data. The predicted results of this analysis concerning turbulence intensity and extreme wind speed are used for the calculation of fatigue life and extreme load in the design procedure of wind turbine structures at offshore wind farms.