• Publications of The Korean Astronomical Society
• /
• v.30 no.1
• /
• pp.17-29
• /
• 2015

The IGRINS is a near infrared high resolution spectrograph jointly developed by the Korea Astronomy and Space Science Institute and the University of Texas at Austin. We present design and fabrication of the optomechanical mount for the five mirrors, i.e., an input fold mirror, a slit mirror, a dichroic, and two camera fold mirrors. Based on the structure analysis and the thermal analysis of finite element methods, the optomechanical mount scheme satisfies the mechanical and the thermal design requirements given by the optical tolerance analysis. The performance of the fabricated mirror mounts has been verified through three IGRINS commissioning runs.

• Proceedings of the KIEE Conference
• /
• 1999.07b
• /
• pp.945-947
• /
• 1999

첨단의 자동화 시스템을 구축하기 위해서는 각 필드기기에서 생산되는 정보들을 적절한 형태로 가공하여 적시에 필요한 공정으로 제공하여 줄 수 있는 지능형 센서 및 필드기기의 도입이 필요하다. 이러한 필드기기들이 유기적으로 정보를 교환하고 공유하기 위해서는 통신망 시스템을 구축할 필요가 있다. 필드버스는 자동화 및 분산 제어 시스템의 컴퓨터 통신망 계층구조에서 최하위 계층 기기들 간에 실시간 통신을 제공하는 산업용 통신망이다. 본 연구에서는 통신용 프로세서인 Mc68360을 기반으로 하여 필드버스의 일종인 Profibus의 물리계층과 데이터링크계층 프로토콜을 구현하였다. 물리계층은 프로세서의 UART 통신 기능과 RS-485칩을 사용하여 구현하고, 데이터링크계층 프로토콜은 프레임 분석과 송수신, 에러처리, 흐름제어, 매체접속권한 관리 등의 기능을 소프트웨어로 구현하였다. 또한 지능형 센서 본래의 목적중의 하나인 원격관리 기능을 위하여 각 필드기기의 노드 주소, 타이머 값 등의 통신 파라미터를 원격 마스터에서 설정할 수 있도록 관리계층의 기능을 추가하였다. 본 연구에서는 각각 하나의 노드기능을 담당하는 여러 개의 보드들로 구성된 testbed를 구축하고, 다양한 통신환경에서 초기화, 정상, 비정상 상태 등의 동작을 실험하였으며, 이를 통하여 지능형 센서용 필드버스의 데이터링크계층 프로토콜이 정상적으로 동작됨을 확인하였다.

• Transactions of Materials Processing
• /
• v.17 no.8
• /
• pp.600-606
• /
• 2008

In closed-die hot forging, a billet is formed in dies such that the flow of metal from the die cavity is restricted. Some parts can be forged in a single set of dies, whilst others, due to shape complexity and material flow limitations, must be shaped in multi sets of dies. The purpose of a performing operation is to distribute the volume of the parts such that material flow in the finisher dies will be sound. This study focused on the design of preforms, flash thickness and land width by theoretical calculation and finite element analysis, to manufacture the super hot forging product, 70MC type piston crown used in marine engine. The optimal design of preforms by the finite element analysis and the design experiment achieves adequate metal distribution without any defects and guarantees the minimum forming load and fully filling of the cavity of the die for producing the large piston crown. The maximum loads obtained by finite element analysis are compared with the results of experiments. The loads of the analysis have good agreements with those of the experiment. Results obtained using DEFORM-2D enable the designer and manufacturer of super hot forging dies to be more efficient in this field.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.10 no.1
• /
• pp.55-60
• /
• 2014

Today, there is increasing the elderly population in rural community, and people of returning from the urban to the rural community are demand to be of high value-added agriculture. In this time, there are required to regularization, standardization, automation, for getting of production of high value crops. In this paper, we are study for automation cultivation control system design for produce high-value crops. this system were designed of two parts that one part is measure and control unit, another part is server part for database and server side control. the main controller for measurement and control is used MC9S08AW60, server for Database and server-side control was using MySQL with CentOS. The source code of control program was coding C and compile with GCC. the functions of measurement and control unit are digital input and output each 8channels and can be scan-able of 20 Bit with 2CH/Sec. Analog Output were designed that can be output of 4-20mA or 0-5V on 4channel. The Digital input and output part were designed 8-channel, and using the high speed photo coupler and relays. We showed that system is possible to measure a 20bit data width, 2Ch/sec as 8 channel analog signals.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.11 no.3
• /
• pp.349-358
• /
• 1999

Thermodynamic cycle analysis has been performed to maximize the liquid amount for various hydrogen liquefaction systems using GM(Gifford-McMahon) refrigerator. Since the present authors' previous experiments showed that the liquefaction rate was approximately 5.1mg/s in a direct contact with a commercial GM refrigerator, the purpose of this study is to predict how much the liquefaction rate can be increased in different configurations and with improved heat exchanger performance. The optimal operating conditions have been analytically sought with real properties of normal hydrogen for the single-stage GM precooled L-H(Linde-Hampson) system, the two-stage GM direct contact system, the two-stage GM precooled L-H system and the two-stage helium GM-JT (Joule-Thomson) system. The maximum liquefaction rate has been predicted to be only about 7 times greater than the previous experiment, when the two-stage precooling is employed and the effectiveness of heat exchangers approaches to 99.0%. It is concluded that the liquefaction rate is limited mainly by the cooling capacity of the current GM refrigerators and a larger scale of hydrogen liquefaction is possible with a greater capacity of cryocooler at 60-70 K range.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2017.05a
• /
• pp.1205-1211
• /
• 2017

The Propulsion System Test Complex(PSTC) was constructed for the verification test of each stage's propulsion system of KSLV-II. Main Control System(MCS) is the system to operate the onboard equipment and the ground equipment of the PSTC simultaneously. This paper describes the critical design, the development status, and test results of Main Control System. The MCS will be used for the interface connection between ground control systems and onboard equipment. Test sequence and operation process of the Work Manager will be conducted by MCS.

• The KIPS Transactions:PartD
• /
• v.11D no.2
• /
• pp.461-470
• /
• 2004

As the semiconductor industrials change 200㎜-sized semiconductor wafer production process to 300㎜-sized one, it requires to develop the software for monitoring and simulating the robot which transfers a 300㎜-sized semiconductor wafer. Because such a software don't run at standalone but communicate MCS(Material Control System) and Its subsystem a robot, its architecture is very complex. Therefore, in order to develop such a software systematically, we must utilize an object-oriented development methodology. UML. This paper presents an UML process application developing the software for monitoring and simulating the robot which transfers a semiconductor wafer on the production process.

• Journal of the Korean Society for Library and Information Science
• /
• v.31 no.3
• /
• pp.165-208
• /
• 1997

The purpose of this study is to evaluate the characteristics of user interface that affect the searching behavior of OPAC users. and then to propose how to design user-friendly interfaces of OPACS. An experiment was conducted on two systems with different interfaces to grasp the effect of user interface to search process and search outcome. A $2\times2$ cross-over design was used for the experiment. Sixty five searchers participated in the experiment. Several statistical techniques such as carry-over effect and system effect of a $2\times2$ cross-over design, $\chi^2$ test, t- test, McNemar test, test of marginal homogeneity through maximum likelihood method, factor analysis, regression analysis, and analysis of variance were applied according to the hypotheses tested and the data analyzed.

• The Bulletin of The Korean Astronomical Society
• /
• v.43 no.2
• /
• pp.43.5-44
• /
• 2018

한국천문연구원은 미국 텍사스대학교(UT)와 협력하여 2009년부터 2013년까지 IGRINS 분광기를 개발하였다. IGRINS는 UT의 맥도널드(McDonald) 천문대 2.7미터 망원경과 로웰(Lowell) 천문대의 4.3미터 망원경, 제미니(Gemini) 천문대 8.1미터 망원경에 장착하여 성공적으로 사용되어 왔으며, 최근 한국천문연구원이 제미니 천문대 운영에 정식으로 참여하면서 IGRINS와 유사한 관측기기를 8.1미터 망원경 전용으로 개발해 달라는 요청을 받고 개발계획을 준비하고 있다. 담금격자(immsersion grating)를 사용하는 IGRINS는 거대마젤란망원경(GMT)의 1세대 관측기기 중 하나로 선정된 적외선 고분산 분광기 GMTNIRS의 핵심 요소기술을 검증하기 위한 선행개발 기기의 의미도 갖고 있다. 한국천문연구원은 2011년 UT와 공동으로 GMTNIRS의 개념설계를 수행하였으며, 이후 개발팀에 카네기(Carnegie) 천문대가 합류하여 6.5미터 마젤란(Magellan) 망원경용으로 GMTNIRS와 유사한 담금격자 적외선 분광기를 개발하고 시험운영함으로써 GMTNIRS의 개발을 앞당기는 계획을 추진 중이다.

• Journal of the Architectural Institute of Korea Planning & Design
• /
• v.34 no.6
• /
• pp.31-37
• /
• 2018

With the progress of national policy researches on the modular construction, many studies have been conducted regarding the standardization of interior building materials. However, studies on the standardization of exterior building materials are still insufficient, and there are no dedicated exterior materials for modular construction. In this regard, this study investigated the necessary of standardization through the analysis on 7 kinds of exterior materials used in general buildings and exterior building materials applied to modular apartment houses in order to establish design criteria for the standardization of dedicated modular exterior materials. Based on the analysis results, assembly reference plane in conjunction with inside dimensions was set, and panelizing standardized in five parts was proposed to solve the problem of low exterior material standardization rate. It also proposed elastic gasket and steel bracket details that can compensate for the fabrication errors of unit boxes and construction errors in stacking.