• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.36 no.4
• /
• pp.267-272
• /
• 1987

In this paper, field oriented control is applied to a 16 bit micro-processor Mc68000 controlled CSI fed induction motor servo drive. The control of induction motor using the principle of its is able to have the transient performance nearly to that of DC motors in the position control. The software and hardware for the Mc68000 is developed. The position control scheme consists of the field oriented control loop and te speed reference pattern generator. The digital computer simlation and experimental results are provided, close agreement between them is obtained.

• Proceedings of the KIPE Conference
• /
• 2018.11a
• /
• pp.109-110
• /
• 2018

ITER 토카막의 초전도코일에 전원을 공급하는 Plant는 CCPS (Correction Coil Power Supply System), TFPS(Toroidal Field Power Supply System), PFCS(Poloidal Field & Central Solenoid)으로 구성되어 있다. 각 Plant의 AC/DC 컨버터는 초전도 코일에 막대한 전류를 흘려 토카막 내에서 1억도에 달하는 열과 전자장의 압력으로 플라즈마상태의 수소를 결합시켜 핵융합에 도달하도록 한다. MCS(Master Control System)은 플라즈마가 핵융합을 잘 구현할 수 있도록 초전도 코일에 공급하는 전원을 총괄적으로 제어한다. 특히 PFCS MCS는 토카막 장치에서 다른 Plant와의 Interface가 복잡하여 설계 및 제작에 어려움이 많다. 본 논문에서는 PFCS MCS가 ITER의 설계요건과 국제기술기준에 맞게 설계하고, 제작하였는지를 확인하기 위해 공장에서 최종 검사하는 FAT(Factory Acceptance Test) 절차를 소개하고 여러 가지 시험을 통하여 평가한 내용을 보이고자 한다.

• Proceedings of the KIPE Conference
• /
• 2013.11a
• /
• pp.175-176
• /
• 2013

본 논문에서는 9상 영구자석 동기발전기 시스템을 제안한다. 통상 3상 발전기의 출력은 전압리플을 포함하기 때문에 DC 링크에 대용량 전해 커패시터를 필요로 한다. 반면, 본 논문에서 제안하는 발전기는 상수가 많기 때문에 DC 링크의 전압리플이 크게 줄어들어 대용량 전해 커패시터를 필요로 하지 않아 전체 발전 시스템의 수명을 확보하는 것이 용이하다. 시뮬레이션 및 실험을 통해서 제안된 시스템의 장점을 확인한다.

• 한국경영정보학회:학술대회논문집
• /
• 2007.06a
• /
• pp.875-882
• /
• 2007

정부 포탈 사이트는 국민들의 참여와 이용을 장려하여 정부와 국민간의 활발한 커뮤니케이션 창구로 이용하려는 전자정부의 의지를 반영하고 있다. 본 연구에서는 어떠한 요인들이 정부 포탈사이트 사용의도에 영향을 미치는지를 검증하여 그 목적을 가지고 있다. 이를 위해서 정보기술 수용에 관련된 연구들 중 널리 알려진 Davis(1989)의 TAM 모형과 DcLone & McLean(l992)의 정보시스템 성과측정 모형을 사용하여 연구모형을 도출하였으며, 지각된 모호성과 정부지원을 조절변수로 사용하여 지각된 유용성에 미치는 영향을 검증하고자 하였다.

• Microbiology and Biotechnology Letters
• /
• v.25 no.2
• /
• pp.144-150
• /
• 1997

After DNA damage, umuDC is the only SOS operon that must be induced to promote SOS mutagenesis in Escherichia coli. The recombinant plasmid pBC401 and pBC402 were constructed to fuse the lac structural genes with promoter region of umuDC operon to induce the expression of lacZ gene by DNA damage. We transformed the plasmid pBC401 and pBC402 into E. coli MC1061, lacZ deleted strain and determined the activity of $\beta$-galactosidase for various mutagen; UV, mitomycin C (MMC), N-methyl-N'-nitro-N-nitrosoguanidine (MNNG), 4-nitroqunoline-1-oxide (NQO), ethyl methanesulfonate (EMS). The $\beta$-galactosidase activities of PBC401 and pBC402 for UV, MMC, and NQO were increased in proportion to expression time until 3 hours thereafter, the activities were constant or slightly decreased. The activities for MNNG and EMS were not so high as for UV, MMC, and NQO. When MNNG and EMS were treated, $\beta$-galactosidase activity of pBC402 was slightly lower than pBC401 but when UV, MMC, and NQO were treated in pBC402, $\beta$-galactosidase activity was slightly higher than in pBC401. Therefore, the pBC402 was better than the pBC401 in terms of sensitivity for frameshift mutagen. We suggest that the plasmid pBC401 and pBC402 are easy to detect mutagens which cause frameshift mutation rather than point mutation.

• Journal of Advanced Navigation Technology
• /
• v.27 no.2
• /
• pp.228-234
• /
• 2023

As the increasing demand for high-quality software, there is huge requiring for quality certification of international standards, industrial functional safety (IEC 61508), automotive (ISO 26262), embedded software guidelines for weapon systems, etc., in the industry. Software companies are very difficult to systematically acquire the quality certification in terms of cost and manpower of Startup, venture small-sized companies. For their companies one test case automatic generation is considered as a core technique to evaluate or improve software quality. This paper proposes a test case automatic generation method based on the design decision table for system and software design verification. We apply the proposed method with OMG's standard techniques of metamodel and model transformation for automatically generating test cases. To do this, we design the metamodels of design decision table (Model) and test case document (Text) and define model transformation to automatically generate test cases, which will expect to easily work MC/DC coverage.

• Journal of Applied Biological Chemistry
• /
• v.66
• /
• pp.73-80
• /
• 2023

Broad range of fatty acids were reported to show antimicrobial activities against broad range of microorganisms. However, possible changes of the antibacterial activity of a fatty acid based on structural variations are largely unknown. This study was focused on determination and comparison of the antimicrobial activities of the medium chain fatty acids, based on the position of carboxyl groups on either terminal end, against the representative food-pathogenic bacteria. Over all, mono-carboxyl medium chain fatty acids (MC-MCFA) presented stronger antimicrobial activities against the food-pathogenic bacteria tested including methicillin-resistant Staphylococcus aureus (MRSA) than di-carboxyl medium chain fatty acid (DC-MCFA). In addition, some of MC-MCFA and DC-MCFA showed high possibility to be used as a synergistic adjuvant for both the commercial β-lactam family antibiotics and aminoglycoside family antibiotics against MRSA.

• Journal of Magnetics
• /
• v.10 no.3
• /
• pp.128-132
• /
• 2005

We report optical ab-plane properties of the layered sodium cobaltate, $Na_xCoO_2$ for x = 0.35 and 0.75. Two samples show metallic behaviors according to dc resistivity transport. Overall temperature dependent optical conductivities of both samples are very similar to those of the high temperature superconducting underdoped cuprates. We found that the optical scattering rate of x = 0.75 sample, which is in a Curie-Weiss metallic phase, varies linearly (non-Fermi liquid) with frequency and temperature while that of x = 0.35 sample, which is in a paramagnetic metallic phase, varies quadratically (Fermi liquid) with frequency and temperature. Both x = 0.35 and 0.75 samples have an onset of scattering around $600\;cm^{-1}$ which can be attributed to the interaction of charge carriers with a bosonic collective mode in a system.

• Analytical Science and Technology
• /
• v.18 no.3
• /
• pp.250-256
• /
• 2005

A selective method of high performance liquid chromatography with UV detector has been applied to determine 4 tetracycline antibiotics in the animal food, simultaneously. The targets were chlortetracycline (CTC), doxycycline (DC), oxytetracycline (OTC), and tetracycline (TC) that are used routinely in veterinary medicine for prevention and control of disease. Food samples were beef, pork, chicken, milk, whole egg, flatfish (Limanda yokohamae), jacopever (Sebastes hubbsi), seabream (Chrysophrys major), eel (Anguilla japonica) and lobster (Hommarus americanus). After extracting food samples with 20% trichloroacetic acid and McIlvaine buffer, they were purified by a $C_18$ SPE cartridge with 0.01M methanolic oxalic acid solution. The concentrated residue was re-dissolved in methanol, filtered, cleaned up and analyzed on a $C_18$ column. The mobile phase was a mixture of 0.01M oxalic acid and acetonitrile with a gradient ratio from 85:15 to 60:40. The UV wavelength was 365 nm. The overall recoveries were ranged from 71% to 98% and the limit of detections were 0.022 for CTC, 0.012 for DC and OTC and 0.009 mg/kg for TC at signal/noise > 3, respectively. As results, CTC, DC and TC were not detected in all selected food samples, however, OTC was detected in meat and fishes. The determined level of OTC was 0.04 ppm for pork, 0.17 ppm for flatfish and 0.05 and 0.08 ppm for jacopever, that were within the Maximum Residue Limits (MRLs) in the food.

• Journal of the Korean Society of Safety
• /
• v.34 no.1
• /
• pp.14-20
• /
• 2019

This paper presents a safety assessment based approach for the safe operation for PCS(Power Conditioning System) of photovoltaic and energy storage systems, applying FTA. The approach established top events as power outage and a failure likely to cause the largest damage among the potential risks of PCS. Then the Minimal Cut Set (MCS) and the importance of basic events were analyzed for implementing risk assessment. To cope with the objects, the components and their functions of PCS were categorized. To calculate the MCS frequency based on IEEE J Photovolt 2013, IEEE Std. 493-2007 and RAC (EPRD, NPRD), the failure rate and failure mode were produced regarding the basic events. In order to analyze the top event of failure and power outage, it was assumed that failures occurred in DC breaker, AC breaker, SMPS, DC filter, Inverter, CT, PT, DSP board, HMI, AC reactor, MC and EMI filter and Fault Tree was drawn. It is expected that the MCS and the importance of basic event resulting from this study will help find and remove the causes of failure and power outage in PCS for efficient safety management.