• The Korean Journal of Ceramics
• /
• 제5권3호
• /
• pp.205-210
• /
• 1999

The thermodynamic properties and phase diagram of the$ PbO-ZrO_2$ system have been critically assessed using the Thermo-Calc program. Excess Gibbs energies were expressed by Redlich-Kister polynomials for the solid phases, by the two-sublattice ionic liquid model for the liquid phase and by the compound energy model for the solid solution phase. All solid phases were treated as stoichimetric compounds.

• Progress in Superconductivity
• /
• 제9권1호
• /
• pp.111-114
• /
• 2007

We have investigated the effect of different heat treatment processes on electrical and magnetic properties of Bi2212/Ag ROSAT wire. The ROSAT wire was fabricated by stacking and arranging 12 filaments Bi2212/Ag tapes in triple rotation symmetry in a Ag tube. ROSAT wires have been prepared using a partial melting method with changing $T_{max}$ and $T_a$ in oxygen atmosphere. The highest critical current density($J_c$) at 65 K under 0 T was $21,158\;A/cm^2$ for wire prepared $890\;^{\circ}C(T_{max})$ and $840\;^{\circ}C(T_a)$, respectively. SEM results indicated that the wire prepared at $890\;^{\circ}C(T_{max})$ and $840\;^{\circ}C(T_a)$ showed better directional phases than the other samples. However the result of magnetic susceptibility measurement indicates that the wire prepared $890\;^{\circ}C(T_{max})$ and $835\;^{\circ}C(T_a)$ had better superconducting phases than the other samples. It was revealed that heat treatment temperature was important factor for superconducting properties of the ROSAT wire.

• 한국세라믹학회지
• /
• 제49권4호
• /
• pp.287-294
• /
• 2012

Ceramic Matrix Composites (CMCs) represent a class of non-brittle refractory materials for harsh and extreme environments in aerospace and other applications. The quasi-ductility of these structural materials depends on the quality of the interface between the matrix and the fiber surface. In this study, a manufacture route is described where in contrast to most other processes no additional fiber coating is used to adjust the fiber/matrix interfaces in order to obtain damage tolerance and fracture toughness. Adapted microstructures of uncoated carbon fiber preforms were developed to permit the rapid infiltration of molten alloys and the subsequent reaction with the carbon matrix. Furthermore, any direct reaction between the melt and fibers was minimized. Using pure silicon as the reactive melt, C/SiC composites were manufactured with an aim of employing the resulting composite for friction applications. This paper describes the formation of the microstructure inside the C/C preform and resulting C/C-SiC composite, in addition to the MAX phases.

• 전기학회논문지
• /
• 제58권2호
• /
• pp.285-291
• /
• 2009

In this paper, comparative analysis of offset voltage PWM method and $V_{max}-V_{mid}$ PWM method for three-phase matrix converter is addressed by using a simple analytical and graphical method. Offset voltage PWM method calculates PWM patterns in terms of offset voltage and variable slope of carrier, and it simplifies matrix converter modulation algorithm significantly. $V_{max}-V_{mid}$ PWM method generates patterns by using two phases and maintaining a remaining phase to base phase, and it is implemented in the industrial products. The most important performance criterion of modulation method is a magnitude of current ripples and it is analytically modelled. The graphical illustration of theses complex multivariable functions make per-carrier cycle and per fundamental cycle behavior of two PWM methods understood. Two modulation methods are analysed with the analytical formulas and graphics, and the analysis shows offset voltage PWM method is superior to $V_{max}-V_{mid}$ PWM method with respect to input current ripples and output voltage ripples.

• The Korean Journal of Ceramics
• /
• 제7권1호
• /
• pp.11-15
• /
• 2001

A thermodynamic assessment for the ZrO$_2$-TiO$_2$ system has been conducted. An optimal thermodynamic data set for this system is evaluated by the CALPHAD(CALculation of PHAse Diagram) method applied to experimental phase diagram and thermodynamic data. The liquid is described by ionic liquid model with two sublattices. The solubilities of the solid phases, tetragonal ZrO$_2$ and TiO$_2$(rutile), were described by subregular substitutional model with one sublattice. Two compounds, ZrTiO$_4$ and ZrTi$_2$O$_6$, are modeled as stoichiometric compounds.

• 한국분말재료학회지
• /
• 제22권3호
• /
• pp.175-180
• /
• 2015

In this study, ternary compound Max Phase $Ti_2AlC$ material was mixed by 3D ball milling as a function of ball milling time. More than 99.5 wt% pure $Ti_2AlC$ was synthesized by using spark plasma sintering method at 1000, 1100, 1200, and $1300^{\circ}C$ for 60 min. The material characteristics of synthesized samples were examined with relative density, hardness, and electrical conductivity as a function of sintering temperature. The phase composition of bulk was identified by X-ray diffraction. On the basis of FE-SEM result, a terraced structures which consists of several laminated layers were observed. And $Ti_2AlC$ bulk material obtained a vickers hardness of 5.1 GPa at the sintering temperature of $1100^{\circ}C$.

• 한국기계가공학회지
• /
• 제18권7호
• /
• pp.97-103
• /
• 2019

Mn+1AXn (MAX) phases are a family of nano-laminated compounds that possess unique combination of typical ceramic properties and typical metallic properties. As a member of MAX-phase, $Ti_2AlN$ bulk materials are attractive for some high temperature applications. In this study, $Ti_2AlN$ bulk with high density were synthesized by spark plasma sintering method. X-ray diffraction, micro-hardness, electrical and thermal conductivity were measured to compare the effect of material properties both $Ti_2AlN$ bulk samples and a conventional Ti-6Al-4V alloy. A femto-second laser conditions were conducted at a repetition rate of 6 kHz and laser intensity of 50 %, 70% and 90 %, respectively, laser confocal microscope were used to evaluate the width and depth of ablation. Consequently, the laser ablation result of the $Ti_2AlN$ sample than that of the Ti-6Al-4V alloys show a considerably good ablation characteristics due to its higher thermal conductivity regardless of to high densification and high hardness.

• 한국컴퓨터산업학회논문지
• /
• 제2권9호
• /
• pp.1183-1190
• /
• 2001

본 논문에서는 아날로그의 비디오 신호를 디지털로 부호화하는데 기존과 다른 파이프라인 방식을 사용하도록 하였다. 부호화기의 전체 동작을 화소 클럭비에 따른 파이프라인 구조로 설계하여 각 하위 블록들의 동작 타이밍을 확보하여 시스템을 안정화시켰으며 고정된 계수와 곱셈의 경우 기존의 ROM 테이블 또는 곱셈기 방식을 사용하지 않고 쉬프트와 덧셈기 방식으로 설계함으로써 시스템의 복잡도를 줄이며 논리 게이트 수를 15%줄이는 효과를 보였다. 설계된 부호화기는 각각의 하위 블록으로 나누어 VHDL로 설계하였고, Max+plusII를 이용한 FPGA로 동작 확인을 하였다.

• Journal of Electrical Engineering and Technology
• /
• 제13권2호
• /
• pp.998-1007
• /
• 2018

The advent of Wireless Sensor Networks (WSN) has led to their use in numerous applications. Sensors are autonomous in nature and are constrained by limited resources. Designing an autonomous topology with criteria for economic and energy conservation is considered a major goal in WSN. The proposed honey-hive clustering consumes minimum energy and resources with minimal transmission delay compared to the existing approaches. The honey-hive approach consists of two phases. The first phase is an Intra-Cluster Min-Max Discrepancy (ICMMD) analysis, which is based on the local honey-hive data gathering technique and the second phase is Inter-Cluster Frequency Matching (ICFM), which is based on the global optimal data aggregation. The proposed data aggregation mechanism increases the optimal connectivity range of the sensor node to a considerable degree for inter-cluster and intra-cluster coverage with an improved optimal energy conservation.

• 한국방사선학회논문지
• /
• 제12권5호
• /
• pp.593-601
• /
• 2018

최근 핵의학에서 진단가치의 향상을 위해 PET-CT에서 이용하고 있는 반정량지표인 SUV를 SPECT-CT에 도입하여 적용하고 있다. 따라서 두 가지 스캐너의 $SUV_{max}$를 팬텀실험을 통해 상관관계를 분석하여 임상적용 가능성을 평가하였다. 부피가 다른 6개의 구로 제작된 팬텀에 방사성의약품 ($^{18}F$, $^{99m}Tc$)을 배후방사능을 고려하여 8:1과 4:1 비율로 주입하고, 임상 프로토콜을 기반으로 PET-CT와 SPECT-CT 스캐너로 양성상을 획득한 후 관심영역을 ROI와 VOI로 구분하여 $SUV_{max}$를 측정하여 분석하였다. 실험결과 두 가지 스캐너로 측정한 $SUV_{max}$는 통계적으로 유의한 차이가 없었다 (P>0.05). 따라서 PET-CT와 SPECT-CT의 $SUV_{max}$는 유의한 수준 내에서 일정한 상관관계를 가지며, 같이 평가되었다. 따라서 SPECT-CT를 이용한 $SUV_{max}$ 정량 분석은 본 연구를 통해 일반화하기에 제한적이지만 임상에 실험적 정보를 제공할 수 있으므로, 임상실험과 같은 관련 실험을 통한 추가 연구가 필요할 것으로 판단된다.