• 정보처리학회논문지C
• /
• 제17C권6호
• /
• pp.471-484
• /
• 2010

이동통신 시스템에서 이동단말이 소비하는 전력은 휴대용 배터리의 용량 제약으로 인하여 매우 중요하게 고려되는 이슈이다. 따라서, Mobile WiMAX 시스템을 포함한 대부분의 무선통신 네트워크 규격은 이동단말의 전력소모를 줄이기 위한 전력절약 모드를 지원한다. 그러나 이들 규격에서 제시하는 전력절약 모드는 청취구간의 시간적인 배치만을 정의한다. 따라서 전력절약 모드로 동작하는 단말의 소비전력은 단말제조사의 구현형태에 의존적이며, 채널환경 변화에 따라 페이징 손실의 위험성도 존재한다. 본 논문은 광대역 이동통신 네트워크 환경에서 전력절약 모드로 동작하는 이동단말이 채널품질의 변동추이를 바탕으로 최선의 기지국을 선택하는 방식을 통해 보다 효율적인 전력사용 및 청취구간 동안 페이징 메시지의 손실 위험을 줄이는 실용적인 알고리즘을 제시한다. 이러한 채널적응형 주파수/기지국 재선택 알고리즘은 청취구간 동안 채널품질을 측정하는 과정, 측정된 채널품질의 변동을 추적하는 과정, 추적결과에 따라 이종 주파수 탐색을 수행하는 과정, 탐색결과에 따라 최선의 주파수 및 기지국을 재선택 하는 과정으로 구성되어 있다. 그러므로 제안된 방식은 단말이 이동함에 따라 해당 네트워크의 채널환경이 변하더라도 전력을 합리적으로 사용함과 동시에 양호한 기지국을 선택하게 함으로써, 청취구간에서 페이징 메시지 수신성능을 향상시킨다. 본 알고리즘을 적용한 시뮬레이션 결과는 단말의 이동하는 채널환경에서 다른 후보방안들 보다 페이징 메시지 수신성능이 우수함을 보여주고 있으며 동시에 단말이 평균적으로 보다 양호한 채널환경에서 전력절약 모드를 동작하게 함을 보여준다.

• 한국결정성장학회:학술대회논문집
• /
• 한국결정성장학회 2000년도 Proceedings of 2000 International Nano Crystals/Ceramics Forum and International Symposium on Intermaterials
• /
• pp.1-33
• /
• 2000

Silicon carbide ceramics with sintering additives from the system AlN-Y$_2$O$_3$ can be gas-pressure sintered to theoretical density. While commonly a combination of sesquioxides is used such as Al$_2$O$_3$-Y$_2$O$_3$, the oxynitrid additives offer the advantage that only a nitrogen atmosphere is require instead of a powder. By starting form a mixture of ${\beta}$-SiC and ${\alpha}$-SiC, and by performing dedicated heat treatments after densification, anisotropic grain growth is obtained which leads to a platelet microstructure showing enhance fracture toughness. In the present work, recent improvement of the mechanical behaviour of these materials at ambient and high temperatures is reported. By means of a surface oxidation treatment in air it is possible to obtain four-point bending strengths in excess of 1 GPa, and the strength retention at high temperatures is significantly improved.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제48권10호
• /
• pp.681-686
• /
• 1999

In this study, a windmill type ultrasonic motor operated by single-phase AC electric field was fabricated, and then revolution characteristics and 3-dimensional vibration mode of the ultrasonic motor were investigated. Brass metal was pressed with umbrella-type using metal mold, then slot of 4 kind was processed at various thickness. It was found that the revolution speed of the ultrasonic motor increased with decreasing the thickness of elastic body. The revolution speed of the ultrasonic motor increased with increasing the slots of elastic body. When the characteristics was measured, applied voltage was changed from $10V_{max}\; to\; 100V_{max}$. Then, revolution was began from $30V_{max}$, if voltage was applied over $90V_{max}$ revolution speed was saturated, and not increased. The maximum revolution speed was 510[rpm] when using elastic body with 6 slots and thickness of 0.15mm. And 3-dimensional displacement mode was rotated clockwise direction.

• Advances in aircraft and spacecraft science
• /
• 제5권6호
• /
• pp.653-669
• /
• 2018

This work has the objective to analyze multibody mechanisms of inflatable structures for manned space applications. The focus is on the evaluation of the main characteristics of MaxFlex, a new module of MSC Adams including the effect of nonlinear flexible bodies. MaxFlex integrates the nonlinear Finite Element Analysis (FEA) of Nastran-SOL400-and the Adams multibody capabilities in one unique solver, providing an improvement concerning the concept and technology based on the co-simulation among solvers. MaxFlex converts the equations of motion of the nonlinear FEA into phase-space form and discretizes them according to the multibody system integrator framework. The numerical results deal with an inflatable manned space module having rigid components and a flexible coating made of Kevlar. This paper is a preliminary assessment of the computational capabilities of the software and does not provide realistic guidelines for the actual design of the structure. The analysis leads to some recommendations related to the main issues to consider in a nonlinear simulation including both rigid and flexible components. The results underline the importance of realistic deployment times and applied forces. Also, a proper structural modeling is necessary, but can lead to excessive computational overheads.

• Journal of Astronomy and Space Sciences
• /
• 제33권2호
• /
• pp.109-117
• /
• 2016

We explain the results of Yu et al. (2015b) of the novel sharpness angle measurement to a large number of spectra obtained from the Fermi gamma-ray burst monitor. The sharpness angle is compared to the values obtained from various representative emission models: blackbody, single-electron synchrotron, synchrotron emission from a Maxwellian or power-law electron distribution. It is found that more than 91% of the high temporally and spectrally resolved spectra are inconsistent with any kind of optically thin synchrotron emission model alone. It is also found that the limiting case, a single temperature Maxwellian synchrotron function, can only contribute up to 58⁺²³₋₁₈% of the peak flux. These results show that even the sharpest but non-realistic case, the single-electron synchrotron function, cannot explain a large fraction of the observed spectra. Since any combination of physically possible synchrotron spectra added together will always further broaden the spectrum, emission mechanisms other than optically thin synchrotron radiation are likely required in a full explanation of the spectral peaks or breaks of the GRB prompt emission phase.

• 한국통신학회논문지
• /
• 제34권12A호
• /
• pp.998-1005
• /
• 2009

OFDMA (Orthogonal Frequency Division Multiple Access) 방식을 기반으로 하는 M-WiMAX(Mobile-Worldwide Interoperability for Microwave Access) 시스템의 상향링크에서는 여러 사용자들이 전송하는 각각의 신호가 서로 다른 지연시간으로 인해 한 OFDMA 심볼 내에 선형적인 위상 성분이 발생하고, 이 위상 성분들이 합성되어 다중 접속 간섭 (Multiple Access Interference : MAI) 으로 기지국에서의 레인징 코드 검출 및 지연시간 추정 성능을 열화 시키는 원인이 된다. 따라서, 본 논문에서는 각 사용자에 의해 발생되는 MAI 를 최소화하고, 레인징 코드 검출 및 지연시간 추정 성능을 향상시키기 위해 기존의 방법에 직렬 간섭 제거(Successive Interference Cancellation : SIC) 를 적용한 레인징 기법을 제안한다. 모의 실험을 통해 기존의 방법보다 향상된 성능을 보였으며, 3GPP LTE 의 랜덤 액세스와의 비교를 통해 M-WiMAX 의 레인징 성능 한계를 확인하였다.

• Journal of Pharmaceutical Investigation
• /
• 제35권5호
• /
• pp.355-360
• /
• 2005

The purpose of the present study was to evaluate the bioequivalence of two cetirizine HCl tablets, Zyrtec tablet (UCB Pharm. Co., Ltd. Korea, reference product) and Zyrix tablet (Kukje Pharm. Co., Ltd., Korea, test product), according to the guidelines of Korea Food and Drug Administration (KFDA). After adding an internal standard (diazepam), plasma samples were extracted using 1 mL of dichloromethane. Compounds extracted were analyzed by reverse-phase HPLC with ultra-violet detector. This method for determination cetirizine is proved accurate and reproducible with a limit of quantitation of 10 ng/mL in male plasma. Twenty-four healthy male Korean volunteers received each medicine at the cetirizine HCl dose of 10 mg in a $2{\times}2$ crossover study. There was a one-week wash out period between the doses. Plasma concentrations of cetirizine were monitored for over a period of 24 hr after the administration. AUC (the area under the plasma concentration-time curve) was calculated by the linear trapezoidal rule. $C_{max}$ (maximum plasma drug concentration) and $T_{max}$ (time to reach $C_{max}$) were compiled from the plasma concentration-time data. Analysis of variance was carried out using logarithmically transformed AUC and $C_{max}$. No significant sequence effect was found for all of the bioavailability parameters indicating that the crossover design was properly performed. The 90% confidence intervals for the log transformed data were acceptable range of log 0.8 to log 1.25 $(e.g.,\;log\;0.93-log\;1.08\;for\;AUC_{0-t},\;log\;0.91-log\;1.08\;for\;AUC_{0-{\infty}}\;and\;log\;1.01-log\;1.11\;for\;C_{max})$. The major parameters, AUC and $C_{max}$ met the criteria of KFDA for bioequivalence indicating that Zyrix tablet is bioequivalent to Zyrtec tablet.

• 생명과학회지
• /
• 제6권2호
• /
• pp.135-141
• /
• 1996

양식을 위한 먹이사료로서 가능성 있는 효모균주를 연구하였다. Kluyveromyces fragilis효모와 Candida utilis 효모의 최대 비증식 속도와 바이오매스 효율은 Saccharomyces cervisiae 효모에 비하여 굉장히 높은 값을 나타내었다. 따라서, 이 연구는 대량생산을 위하여, 플라스크 배양을 통한 이들 두 효모균들의 성장특성에 그 초점을 맞추었다. 5% 접종량을 가지고 실험한 결과, 가장 좋은 $\mu$$_{max}$ 와 OD$_{max}$ 값들은 K, fragilis는 2.5% fructose 배지에서, C. utilis는 2% YE배지에서 각각 얻었으며, 이 때의 이 값들은 K. fragilis는 0.73 hr$^{-1}$1 와 3.00을 C. uitilis는 0.59 hr$^{-1}$ 와 2.80으로 밝혀졌다. 또한, 아연과 염의 초기종도가 증가할수록 균성장에 있어서의 우도기는 증가하였으며, 접종량이 증가할수록 유도가는 감소하였다. 두 효모균은 3.5% 염농도에서 비교적 잘 자랄 수 있었으며, C. utilis 효모균만이 아연을 이용할 수 있었다.

• 한국정밀공학회지
• /
• 제5권4호
• /
• pp.48-58
• /
• 1988

This study was undertaken to observe the formation behavior of ferro- magnetic phase in Mn-Al-Cu Alloys. The alloy selected for this investigation was 70% Mn-29% Al-1% Cu. This pre-allyed pig was prepared to the cylinderical castings using an Induction furnace after homogenizing at $1100^{\circ}C$ for 2hr, the specimens were cooled by cooling methods. Subwequent isothermal heat treatments were followed at $550^{\circ}C$ for various periods of time at predetermined(1-1000min). The formation behavior of ferromagnetic phase was investigated by measurements of magnetic properties of the specimens at each stage of heat treatment, and optical microscopic esamination and X-Ray diffraction analyses were also employed. By this basic experimental results, the conclusions are as follows 1) In order to obtain much amount of ferromagnetic phase, the optimum average cooling rate was about 7.35-$16.4^{\circ}C$/sec($1100^{\circ}C$-$600^{\circ}C$). 2) We verified the decomposition of {\tau} phase to {\beta} -Mn and {\gamma} , as the specimens were homogenized at $1100^{\circ}C$ for 12hr, then heat-treased at $550^{\circ}C$ for 1-1000min. 3) A condition of optimum heat treatments in Mn-Al-Cu permanent mag-netic alloys showed that after homogenizing at $1100^{\circ}C$ for 2hr, the speciments were cooled in air or furnace(A) and subsequent heat treatments at $550^{\circ}C$ for 1-30min. The maximum magnetic properties were measured as follows: Air cooling; Br=1200(Gause), bHc=100(oe), (BH)max=0.07(MGOe) Furnace cooling(A);Br=950(Gauss), bhe=80(Oe), (BH)max=0.05(MGOe)

• 전력전자학회논문지
• /
• 제10권5호
• /
• pp.501-507
• /
• 2005

본 연구에서는 유도 전동기의 파워 스펙트럼 확산을 위한 LF2407 DSP기반 하이브리드 랜덤 PWM(HRPWM)을 제안하였다. 제안된 방법은 Lead-Lag 랜덤 비트를 갖는 PRBS (Pseudo-Random Binary Sequence)와 논리적으로 비교를 하기 위한 랜덤 삼각파 캐리어로 구성된다. 또한 DSP에 의하여 랜덤 수 및 PRBS 그리고 3상 기준 정현파를 실시간으로 발생하며, DSP외부의 주파수 변조기 MAX038에 의하여 랜덤 주파수의 캐리어를 발생한다. 본 연구의 타당성 검증을 위하여 제안된 기법을 3상 가변속 구동장치에 적용하였으며, 종전의 방법과 전압 및 전류 그리고 전동기 소음의 파워 스펙트럼을 비교 검토하였다.