• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.32 no.3
• /
• pp.317-322
• /
• 1987

In order to find out the optimum transplanting date of mat rush, this study was investigated ecological characters, yield components and yield of three varieties (Okayama#2, Sajanami and Sedo #4) at 5 transplanting dates(October 25, November 5, November 15, November 25 and March 5). As transplanting date was delayed, the flowering date and maturing date was delayed also and stem length was longest in October 25 transplanting but it grew short in the late transplanting. Number of stems per plant was increased most in October 25 transplanting, that is, increased to 143 in okayama#2, 138 in Sedo#4 and 135 in Sajanami, and it was decreased in the late transplanting. Fresh stem yield and dry stem yield were heaviest in October 25 transplanting, and it was light in the late transplanting. Judging from the results reported above, in optimum transplanting date of mat rush seemed to be before the October 25.

• Korean Journal of Materials Research
• /
• v.5 no.5
• /
• pp.583-597
• /
• 1995

We investigated the effect of the oxygne partial pressure on the phase stability of B $i_{2}$S $r_{2}$Ca C $u_{2}$ $O_{8+x}$ and B $i_{2}$S $r_{2}$C $a_{2}$C $u_{3}$ $O_{10+x}$ at 82$0^{\circ}C$. As the oxygen pressure decreased, B $i_{2}$Sr/sb 2/CaC $u_{2}$ $O_{8+x}$ melted at 2.2$\times$10$^{-3}$ atm $O_{2}$. In the case of the B $i_{1.7}$P $b_{0.4}$S $r_{2}$C $a_{2}$ $O_{10+x}$, it started to decompose into theree phases of B $i_{2}$S $r_{2}$Cu $O_{6+y}$, $Ca_{2}$Cu $O_{3}$ and C $u_{4}$ $O_{3}$ and C $u_{4}$ $O_{3}$ at 8.0$\times$10$^{-3}$ atm $O_{2}$ and was completely decomposed at 4.3$\times$10$^{-3}$ atm $O_{2}$ B $i_{2}$S $r_{2}$C $a_{2}$C $u_{3}$ $O_{10+x}$ phase was not formed by the solid state reaction from the mixutre of $i_{2}$S $r_{2}$CaCu.sub 2/ $O_{8+x}$, $Ca_{2}$Cu $O_{3}$ and CuO down to 2.2$\times$10.sub -3/ atm O.sub 2/ but formed by the solidifciation of the formed from the mixture of the intermediate compounds in the Bi-Sr-Ca-Cu-O system and the fromation temperature of Bi.sub 2/S $r_{2}$C $a_{2}$Cu.$_{3}$ $O_{10+x}$ can be lowered by reducing oxygen partial pressure.e.e.ure.e.e.

• Journal of the Korean Geotechnical Society
• /
• v.20 no.9
• /
• pp.25-32
• /
• 2004

Some amount of cements can be added into the soil with high water content to improve the engineering properties. In such a case, it is difficult to predict and figure out the phase changes of the soil-cement mixture which is closely associated with workability of the soil-cement mixture. Changes in heat of hydration and hardness of the cement pastes are known to provide the useful information about the phase changes of the soil-cement mixtures. In this study, heat of hydration and cone penetration depth were measured from the specimens of cement paste and 3 soil-cement mixtures. From the experimental results, it was found that the phase changes of the soil-cement mixtures are the same as those of cement paste, and that shear strength of the mixtures abruptly increases when the heat of hydration is minimum. Initial setting time of the mixtures coincides with the state when fall cone penetration depth was 1.0 mm and it is defined as plastic limit of the mixtures. Initial setting time of the mixtures is retarded as soil/cement ratio is increased. Measurements of heat of hydration and fall cone apparatus could be the useful tools to predict the phase changes of tile soil-cement mixtures.

• The Journal of Korean Physical Therapy
• /
• v.12 no.1
• /
• pp.41-47
• /
• 2000

BACKGROUND AND PURPOSE. The purpose of this study is to investigate the effect of the disturbed vision on the gait distance parameters on the healthy young population. SUBJECTS. Twenty four healthy college aged individuals are randomly assigned to both a condition with a strobe light and the other condition without a strobe light. METHODS. The instrumentation used for gait analysis is the GaitRite electronic walkway system with a personal IBM computer. The examiner naked all the subjects to walk 6 times on the gait mat without the strobe light and. 6 times on the mat with the strobe light. The first 4 trials were practice and the last two trials were recorded in both conditions. The gait parameters analyzed were as follows : velocity, cadence, step length, and heel to heel base of support. RESULTS. Paired samples t-test used for this study did not found any significant differences between the two conditions because the p-values that were analyzed on the experiment were Utter than 0.05. The gait parameters that were analyzed included cadence, velocity, left and right heel to heel base of support, and left and right step length. DISCUSSION AND CONCLUSION. Based on this population, the condition of disturbed vision via the effect of the strobe light was not significantly challenging to compromise the body's sensory systems. However, in the elderly population, these systems can undergo age related changes. Visual changes rapidly decline in people 60 to 80 years of age and changes in the vestibular system include $20-40\%$ reduction in hair cells.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.19 no.1
• /
• pp.47-51
• /
• 2016

It has made a special study of bending behavior of F.R.P. sandwich beams with bonded 2nd-reinforced plies. Specimen's faces were made of chopped mat 300-450, roving clothes 570, core is urethane foam, resin is 713bp unsaturated polyester for ship construction and the mixture weight ratio of resin versus fiber was 55:45 for bending analysis. The purpose of this paper is to study the exact bending behavior of bonded area's deflection and stiffness depends upon various bonded F.R.P. (2nd reinforced ply) length and thickness on which covered joints and to find the optimum design for the sandwich structures. All results and suggestions are based on experiment and using thick face calculation.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.54 no.2
• /
• pp.95-102
• /
• 2012

The objective of this research was to experimentally test the effect of rice straw mats on the reduction of runoff, sediment discharge and turbidity under a laboratory scale. We used the small runoff plots of 1 m ${\times}$ 1 m ${\times}$ 0.65 m ($L{\times}W{\times}H$) in size filled with loamy sand. Experimental treatments were bare (control), rice straw mat cover of straw mats + PAM + Gypsum (SPG), rice straw mats + Chaff + PAM + Gypsum (SCPG) and rice straw mats + Sawdust + PAM + Gypsum (SSPG); slope of 10 % or 20 %; and rainfall intensity of 30 mm/hr. Runoff volume and rate of covered plots were significantly lower than those of control plot. Average runoff rate of covered plots, slope of 10 % and 20 %, decreased 85.6 % and 72 % in respectively. Sediment reduction ratio was more than 99 % regardless of slope. The differences runoff and sediment discharge among different cover materials were not significant. It was also shown that even if runoff reduction by surface cover were low, sediment discharge reduction could be very significant and contribute to improve the water quality of streams in sloping agricultural regions. It was concluded that the use of straw mat and soil amendments (PAM and Gypsum) on sloping agricultural fields could reduce soil erosion and muddy runoff significantly and help improve the water quality and aquatic ecosystem in receiving waters. But mixing effect of PAM and Gypsum was minimal.

• Journal of the Korea Furniture Society
• /
• v.21 no.3
• /
• pp.237-247
• /
• 2010

This research was carried out to examine the properties of black charcoal board, in order to find the proper manufacturing condition for the black charcoal-board made of the charcoal. The charcoal in this study was distillated from domestic wood waste, and it were also the purpose of this study to see if the black charcoal-board has the advantageous properties of charcoal as a well-being building material against the sick house problem. Domestic wood waste was consisted of MDF 40%, PB 30%, plywood 15% and wood 15%, respectively. Black charcoal board was produced by hot pressing with following conditions; temperature $170^{\circ}C$, three stage pressing cycle of $40-10-40\;kgf/cm^2$(1min.-2.5min.-5min.) and non formaldehyde adhesives [P15%+M5%:MDI(M), poly vinyl acetate emulsion(P). Fine mixed particle size [#6-12(16.9%), #12-18(16.7%), #12-40(47.2%), #40-60(9.5%), #60-100(5.9%), less than #100(3.8%)] gave better results than larger particle size [over #6(33.8%), #12-18(17.7%), #12-40(37.7%), #40-60(6.4%), #60-100(2.6%), less than #100(1.8%)]. Final moisture content of the mat was best at 36%. Black charcoal-board showed less MOR and IB(internal bond), more WA(water absorption) than that of white charcoal-board. Black charcoal board showed not only the same gas adsorption and dimensional stability as white charcoal board but also good cutting, nailing and drilling for indoor environment systems.

• Journal of the Korean Wood Science and Technology
• /
• v.47 no.3
• /
• pp.290-298
• /
• 2019

The sound absorption coefficient and transmission loss of several types of rice hull mats with varying apparent densities and thicknesses are estimated in this paper using the transfer function and matrix methods, respectively, to evaluate the possibility of using rice hull as an acoustic construction material. The mean sound absorption rates of 10-cm-thick rice hull mats with target densities of $0.10g/cm^3$, $0.12g/cm^3$, and $0.14g/cm^3$ were 0.91, 0.92, and 0.95, respectively, while those of the 1-cm-thick plywood attached to the back of the rice hulls were 0.90, 0.92, and 0.92, respectively. The means of the sound transmission loss of the 10 cm-thick rice hull mats with the target densities of $0.10g/cm^3$, $0.12g/cm^3$, and $0.14g/cm^3$ were 7.66 dB, 10.49 dB, and 14.14 dB, respectively, while those of the 1 cm-thick plywood attached to the back of the rice hulls were 33.34 dB, 36.72 dB, and 38.95 dB, respectively. In conclusion, a rice hull mat could be used as acoustic construction materials because of its high sound absorption coefficient and sound transmission loss.

• Composites Research
• /
• v.36 no.1
• /
• pp.59-67
• /
• 2023

Damage caused by impact on a vehicle composed of CFRP(carbon fiber reinforced plastic) composite to reduce weight in the aerospace industries is related to the safety of passengers. Therefore, it is important to understand the damage behavior of materials that is invisible in impact situations, and research through the FEM(finite element model) is needed to simulate this. In this study, FEM suitable for predicting damage behavior was constructed for impact analysis of unidirectional laminated composite. The calibration parameters of the MAT_54 Enhanced Composite Damage material model in LS-DYNA were acquired by inverse estimation through ANN(artificial neural network) model. The reliability was verified by comparing the result of experiment with the results of the ANN model for the obtained parameter. It was confirmed that accuracy of FEM can be improved through optimization of calibration parameters.

• BMB Reports
• /
• v.35 no.5
• /
• pp.465-471
• /
• 2002

From fruiting bodies of L. edodes strain L-54, single-spore isolates (SSIs) were collected. Two parental types of L-54 were regenerated via monokaryotization. By means of random-amplified polymorphic DNA (RAPD), DNA samples from L-54, its two parental types, and 32 SSIs were amplified with arbitrary primers. Dedikaryotization was demonstrated, and 91 RAPD-based molecular markers were generated. RAPD markers that were segregated at a 1:1 ratio were used to construct a linkage map of L. edodes. This RAPD-linkage map greatly enhanced the mapping of other inheritable and stable markers [such as those that are linked to a phenotype (the mating type), a known gene (priA) and a sequenced DNA fragment (MAT)] with the aid of mating tests, bulked-segregant analysis, and PCR-single-strand conformational polymorphism. These markers comprised a genetic map of L. edodes with 14 linkage groups and a total length of 622.4 cM.