• Journal of Advanced Research in Ocean Engineering
• /
• 제1권1호
• /
• pp.1-13
• /
• 2015

Post-Katrina investigations revealed that most earthen levee damage occurred on the levee crest and landward-side slope as a result of either wave overtopping, storm surge overflow, or a combination of both. In this paper, combined wave overtopping and storm surge overflow of a levee embankment strengthened with high performance turf reinforcement mat (HPTRM) system was studied in a purely Lagrangian and meshless approach, two-dimensional smoothed particle hydrodynamics (SPH) model. After the SPH model is calibrated with full-scale overtopping test results, the overtopping discharge, flow thickness, flow velocity, average overtopping velocity, shear stress, and soil erosion rate are calculated. New equations are developed for average overtopping discharge. The shear stresses on landward-side slope are calculated and the characteristics of soil loss are given. Equations are also provided to estimate soil loss rate. The range of the application of these equations is discussed.

• 한국지반신소재학회논문집
• /
• 제16권2호
• /
• pp.109-119
• /
• 2017

본 연구에서는 낙동강 하구 델타지역에 위치한 연구지역의 상부퇴적사질토층이 샌드매트와 같은 수평배수재로서의 통수능 기능을 수행할 수 있는지를 검토하였다. 상부퇴적사질토에 대한 입도분포분석 및 투수시험 결과 일부 기준을 만족시키지 못하는 것으로 나타나 수치해석연구가 추가로 수행되었다. 델타지역 연약지반위에 샌드매트 1m 포설할 때와 연약지반위에 퇴적사질토층이 1, 2, 3, 4m 두께로 형성된 경우에 대한 압밀해석을 실시하였다. 그 결과 두께가 2m 이상이 되면 델타지역 퇴적사질토층은 샌드매트처럼 수평배수층으로 기능을 수행할 수 있는 것으로 나타났다. PVD를 설치한 경우 퇴적사질토층의 수평배수층 역할이 더욱 증가되었다. 본 연구를 통해 낙동강 델타 지역의 상부퇴적사질토층의 수평배수재로서의 기능이 확인되었다.

• Journal of Ecology and Environment
• /
• 제45권1호
• /
• pp.40-53
• /
• 2021

The level of soil organic carbon (SOC) fluctuates in different types of forest stands: this variation can be attributed to differences in tree species, and the variables associated with soil, climate, and topographical features. The present review evaluates the level of SOC in different types of forest stands to determine the factors responsible for the observed variation. Mixed stands have the highest amount of SOC, while coniferous (both deciduous-coniferous and evergreen-coniferous) stands have greater SOC concentrations than deciduous (broadleaved) and evergreen (broadleaved) tree stands. There was a significant negative correlation between SOC and mean annual temperature (MAT) and sand composition, in all types of forest stands. In contrast, the silt fraction has a positive correlation with SOC, in all types of tree stands. Variation in SOC under different types of forest stands in different landscapes can be due to differences in MAT, and the sand and silt fraction of soil apart from the type of forests.

• 한국해양환경ㆍ에너지학회지
• /
• 제12권1호
• /
• pp.55-59
• /
• 2009

중소형 폐 선박으로부터 생성되는 FRP를 재활용하기 위한 방법으로 층상으로 배열된 로빙층과 매트층을 분리하는 것은 에너지 면에서나 환경적인 면에서 많은 장점을 가지고 있다. 비록 로빙층과 매트층은 그 비율은 다르나 모두 수지와 유리를 포함한다는 유사성과 로빙층은 매트층에 비해 얇은 두께로 존재한다는 이유로 인해 로빙층을 매트층과 분리할 때 기계가 자동적으로 충간의 차이를 인식하기는 어렵다. 본 연구에서는 유리의 구성비가 다른 두 층의 화학적 성질의 차를 이용하여 광학적으로 층간 인식이 가능한 방법을 모색하였다. FRP에 대해 (1) FRP의 층 사이에 존재하는 수지를 녹이는 진한 황산, 또는 (2) 유리를 녹이는 염기성 용액(KOH의 메탄올과 아이소프로판올 용액), (3) 유리의 $SiO_2$와 반응하는 플루오르산(HF)용액, (4) HF 용액으로 처리한 후 수용성 염료를 도포한 경우, 각각 두 층간의 차별화가 일어났다. 이 결과를 이용하여 폐 FRP의 분리 공정이 단순화될 수 있을 것이다.

• 한국식품조리과학회지
• /
• 제8권3호
• /
• pp.233-239
• /
• 1992

The characteristics of Packsulgi were investigated with different cooking methods of conventional and pressure cookers and variation in panicle size of rice flour. The water contents of rice f1ours and Packsulgis were greater as the particle became coarser. The water contents of Packsulgis cooked with pressure cooker (P) were greater than those of conventional cooker (C). Degree of gelatinization in P was higher than that of C. There were no significant differences among the samples of P, whereas coarser f1ours tended to show higher degree of gelatinization than finer ones in C. The results of textural properties measured by rheometer showed that hardness, cohesiveness and gumminess of P was higher than that of C. The textural parameter of P increased as the particle became finer, whereas mat of C increased as the particle became coarser. L value of C was higher than that of P in me same particle size, whereas a and b value of P was higher than that of C. L and a value of both P and C increased as the particle became finer. b value in P increased as the particle became coarser, whereas mat in C increased as the particle became finer. According to me sensory evaluation, the appearance of C was more acceptable man that of P, whereas the texture of P was more acceptable than mat of C. There were no significant differences in overall quality among P and c and Packsulgis made by 60, 100 mesh rice f1our had higher acceptability than others.

• Progress in Superconductivity
• /
• 제1권1호
• /
• pp.31-35
• /
• 1999

We have fabricated and tested a simple circuit of the rapid single-flux-quantum(RSFQ) four-stage shift register using a single layer high-$T_c$ superconducting (HTS) $YBa_2Cu_3O_{7-x}$ (YBCO) thin film structure with 9 step-edge Josephson junctions. The circuit includes two read superconducting quantum interference devices(SQUID) and four stages. To establish a robust HTS RSFQ device fabrication process, we have focussed on the reproducible process of sharp and straight step-edge formation as well as the ratio of film thickness to step height, t/h. The spread of step-edge junction parameters was measured from each 13 junctions with t/h=1/3, 1/2, and 2/3 at various temperatures. We have demonstrated the simplified operation of the shift register at 65 K.

• 한국재료학회지
• /
• 제2권2호
• /
• pp.151-156
• /
• 1992

본 연구에서는 $Ba(OH)_2{\cdot}8H_2O,\;Sr(OH)_2{\cdot}8H_2O$ 및 $Ti(i-OC_3H_7)_4$를 사용하여 졸-겔법에 의해 미세한 $(Ba_{1-x}Sr_{x})TiO_3$ 분말을 제조하였다. TEM 관찰, BET 비표면적측정 및 XRD회절도의 분석결과 $700^{\cric}C$에서 하소한 뚠말의 입자크기는 20~40nm이고 입방정상으로 존재하였다. 또한 XRD 회절도고부터 계산된 격자상수 및 (112)피크의 이동으로부터 고용체분말이 형성되었음을 확인할 수 있었다. 제조된 분말에서의 EDAX 분석을 통한 양이온들의 상대적인 비율 및 소결체에 대한 유전상수의 측정결과로부터 제조된 분말에서 양이온들의 분포가 입자단위에서 균질함을 예상할 수 있었다.

• The Journal of Korean Physical Therapy
• /
• 제21권4호
• /
• pp.43-49
• /
• 2009

Purpose: This study examined the dynamic peak plantar pressure under the foot areas in those with a functional leg length inequality. Methods: The dynamic peak plantar pressure under the foot areas in an experimental group with a functional leg length inequality (n=20) and a control group (n=20) was assessed a using the Mat-Scan system (Tekscan, USA). The peak plantar pressure under the hallux, 1st, 2nd, 3-4th and 5th metatarsal head (MTH), mid foot, and heel was measured while the subject was walking on the Mat-Scan system. Results: The experimental group had significantly higher peak plantar pressure under all foot areas when the dynamic peak plantar pressure in the short leg and long leg sides was compared. The control group had a significantly higher peak plantar pressure under the 1st, 2nd, 3-4th, and 5th MTH when the dynamic peak plantar pressure in the short leg and long leg sides were compared. The experimental group showed a significantly larger difference in the dynamic peak plantar pressure under the hallux, 1st, 2nd, 3-4th and 5th MTH, mid foot and heel than the control group. Conclusion: A functional leg length inequality leads to an increase in the weight distribution and dynamic peak plantar pressure in the side of the short leg.

• 반도체디스플레이기술학회지
• /
• 제3권1호
• /
• pp.35-39
• /
• 2004

Statistical design of experiments was successfully employed to investigate the effect of alternating magnetic field on activation of polycrystalline Si (p-Si) doped as n-type using $\textrm{PH}_3$, by full factorial design of three factors with two levels. In this design, the input variables are graphite size, alternating current, and activation time. The output parameter, sheet resistance, is analyzed in terms of the primary effects and multi-factor interactions. Notably, the three-factor interaction is calculated to be a dominant interaction. The interaction between graphite size and activation time and the main effect of current are important effects compared to the other variables and relevant interactions. Alternating magnetic flux activation is proved a significantly beneficial processing technique.

• 한국농공학회논문집
• /
• 제55권2호
• /
• pp.29-36
• /
• 2013

The objective of the research was to describe the effect of straw mat cover and soil amendments on the reduction of runoff and non-point source load from steep sloped highland agricultural fields. Four $5{\times}30$ m plots on sandy loam soil with 28 % slope were prepared. Experimental treatments were bare (control), rice straw mat cover (3,000 kg/ha) (S), PAM (5 kg/ha)+Gypsum (1 ton/ha) (PG) and rice straw mat cover+PAM+Gypsum (SPG). A variety of lettuce was cultivated and runoff was monitored during a growing season in 2011. Natural monitoring was conducted to three times. Runoff rate of S, PG and SPG plots were significantly lower than those of control plot. Especially, the runoff rate is zero in SPG plot at a first rainfall events. The reduction rate of runoff from the S, PG and SPG plots was 30.8 %, 29.0 % and 81.8 % compared to control plots, respectively. The reduction rate of NPS pollution load of S, PG and SPG was ranged of 50~90 %, 30~70 % and 90~100 %, respectively. Yield of lettuce from S, PG and SPG plots was respectively 400 (567 kg/ha), 320 (453 kg/ha) and 760 (1,067 kg/ha) that of compared to control plots greater than that from control plots (140 kg/ha). We speculated that the experimental treated plots could hold more nutrients and moisture than the control and helped the crop grow healthier. When analyzing the above results, in terms of reduction of runoff and NPS pollution load and crop yields, SPG experimental treatment had the best effect. It was concluded that the use of rice straw mats cover and soil amendments on soil surface could not only reduce the NPS pollution loads in receiving waters but also help increase the crop yield.