• Applied Microscopy
• /
• 제47권3호
• /
• pp.110-120
• /
• 2017

Non-isothermal thermogravimetry (TG) measurements on melt-quenched $Bi_xSe_{100-x}$ specimens (x=0, 2.5, 7.5 at%) were made at a heating rate ${\beta}=10^{\circ}C/min$ in the range $T=35^{\circ}C{\sim}950^{\circ}C$. The as-measured TG curves confirm that $Bi_xSe_{100-x}$ samples were thermally stable with minor loss at $T{\leq}400^{\circ}C$ and mass loss starts to decrease up to $600^{\circ}C$, beyond which trivial mass loss was observed. These TG curves were used to estimate molar (Se/Bi)-ratios of $Bi_xSe_{100-x}$ samples, which were not in accordance with initial composition. Shaping features of conversion curves ${\alpha}(T)-T$ of $Bi_xSe_{100-x}$ samples combined with a reliable flow chart were used to reduce kinetic mechanisms that would have caused their thermal mass loss to few nth-order reaction models of the form $f[{\alpha}(T)]{\propto}[1-{\alpha}(T)]^n$ (n=1/2, 2/3, and 1). The constructed ${\alpha}(T)-T$ and $(d{\alpha}(T)/dT)-T$ curves were analyzed using Coats-Redfern (CR) and Achar-Brindley-Sharp (ABS) kinetic formulas on basis of these model functions, but the linearity of attained plots were good in a limited ${\alpha}(T)-region$. The applicability of CR and ABS methods, with model function of kinetic reaction mechanism R0 (n=0), was notable as they gave best linear fits over much broader ${\alpha}(T)-range$.

• Animal cells and systems
• /
• 제4권1호
• /
• pp.51-55
• /
• 2000

Mass loss and changes of mineral nutrients during the decomposition of mushrooms, Russula alboareolata and Lactarius violascens, were investigated for 7d from June 29 to July 5 in 1999 in an oak stand in Kongju, Korea. At 7d after installation of litterbags, the remaining mass of R. alboareolata and L. violaxcens was 9.4% and 25.9%, respectively. The mass loss rate of R. alboareolata was significantly higher than that of L. violascens. Concentration of N, P, K, Ca and Mg of R. alboareolata and L. violascens were 37.7 mg/g, 0.97mg/g, 38.25 mg/g, 0.04 mg/g, and 0.75 mg/g for R. alboareolata and 45.7 mg/g, 1.31mg/g, 24.0 mg/g, 0.06 mg/g, and 0.80 mg/g for L. violascens, respectively. Concentrations of nutrients in R. alboareolata and L. violascens were much higher than those in the surrounding leaf litter. N, P, Ca and Mg concentrations in the decomposing mushroom tissue were higher during the experimental period in both species than initial concentrations. Potassium increased during the first 3 d and then decreased in both species. Potassium contents in the mushroom were much greater than those of Ca and Mg. Except for Ca, there was no immobilization period in all the nutrients during decomposition. At 7 d after installation of litterbags, the remaining N, P, K, Ca and Mg of R. alboareolata and L. violascens were 9.8%, 8.9%, 2.7%, 47.7%, and 14.8% of the initial contents for R. alboareolata and 28.2%,30.5%, 19.6%, 199.9%, and 02.1% for L. violascens, respectively. Nutrients could be relocated spatially during the formation and decomposition of the Basidiomycetes fruiting body.

• 천문학회지
• /
• 제51권2호
• /
• pp.37-48
• /
• 2018

Massive stars blow powerful stellar winds throughout their evolutionary stages from the main sequence to Wolf-Rayet phases. The amount of mechanical energy deposited in the interstellar medium by the wind from a massive star can be comparable to the explosion energy of a core-collapse supernova that detonates at the end of its life. In this study, we estimate the kinetic energy deposition by massive stars in our Galaxy by considering the integrated Galactic initial mass function and modeling the stellar wind luminosity. The mass loss rate and terminal velocity of stellar winds during the main sequence, red supergiant, and Wolf-Rayet stages are estimated by adopting theoretical calculations and observational data published in the literature. We find that the total stellar wind luminosity due to all massive stars in the Galaxy is about ${\mathcal{L}}_w{\approx}1.1{\times}10^{41}erg\;s^{-1}$, which is about 1/4 of the power of supernova explosions, ${\mathcal{L}}_{SN}{\approx}4.8{\times}10^{41}erg\;s^{-1}$. If we assume that ~ 1 - 10 % of the wind luminosity could be converted to Galactic cosmic rays (GCRs) through collisonless shocks such as termination shocks in stellar bubbles and superbubbles, colliding-wind shocks in binaries, and bow-shocks of massive runaway stars, stellar winds might be expected to make a significant contribution to GCR production, though lower than that of supernova remnants.

• 천문학회보
• /
• 제37권2호
• /
• pp.140.2-140.2
• /
• 2012

The silicate carbon star IRAS 09425-6040 shows very conspicuous crystalline silicate dust features and excessive emission at far infrared. To investigate properties of dusty envelopes around the object, we use radiative transfer models for axisymmetric and sphericallly symmetric dust distributions. We perform model calculations for various possible combinations of dust shells and disks with various dust species. We compare the model results with the observed spectral energy distributions (SEDs) including the IRAS, ISO, AKARI, MSX and 2MASS data. We find that a model with multiple disks of amorphous and crystalline silicate and multiple spherical shells of carbon dust can reproduce the observed SED fairly well. This supports the scenario for the origin of silicate carbon stars that oxygen-rich material was shed by mass loss when the primary star was an M giant and the O-rich material is stored in a circumbinary disk. Highly (about 75 %) crystallized forsterite dust in the disk can reproduce the conspicuous crystalline features of the ISO observational data. This object looks to have a detached silicate and H2O ice shell with a much higher mass-loss rate. It could be a remnant of the chemical transition phase. The last phase of stellar winds of O-rich materials looks to be a superwind.

• Applied Biological Chemistry
• /
• 제41권5호
• /
• pp.372-376
• /
• 1998

생강의 삼투압 건조 중 설탕용액의 농도와 온도 및 침지시간에 따른 내부 물질이동을 생강 내부의 수분손실, 설탕흡수, 몰랄농도 및 속도매개 변수로써 조사하였고 갈색화 반응정도를 평가하였으며 데치기와 삼투압건조를 각각 거친 후 열풍건조 시킨 것에 대하여 복원 시 텍스쳐를 비교하였다. 용액의 농도와 온도가 증가함에 따라서 수분손실, 설탕흡수, 몰랄농도 및 속도매개 변수가 증가하였으며, 용액농도와 온도에 관계없이 수분손실, 설탕흡수, 몰랄농도는 초기 3분간 침지과정에서 빠르게 이루어진 후 증가현상이 둔화되었다. $80^{\circ}C$의 60 Brix 설탕용액에서 18분간 침지하였을 때 40.05 g 수분손실/100 g생강으로 초기 수분함량 83.02%(wet basis) 기준으로 약 52%의 수분을 제거하는 효과를 갖는다. 속도매개 변수는 설탕용액의 농도 보다는 온도에 의한 변화가 컸다. 갈색화 정도는 설탕용액의 농도와 온도에 관계없이 15분간 침지시켰을 때 가장 낮은 O.D.값을 나타내었으며, 대조구(O.D.=0.132)와 비교하였을 때 $80^{\circ}C$에서 40 또는 50 Brix의 설탕용액에 15분간 침지시킨 것이 가장 낮은 값(O.D.=0.027)을 보였다. 데치기 공정을 시킨 것과 대조구를 열풍건조 시킨 다음 끓는 물에서 3분간 복원시킨 후의 관통힘은 차이가 나타나지 않았으나 삼투압 건조시킨 생강은 대조구 보다 $22{\sim}34%$ 적게 나타났다.

• 한국표면공학회지
• /
• 제24권3호
• /
• pp.119-124
• /
• 1991

Recently, the trend of research in hard coating is concentrate on developing the process of ionization rate under low operating pressure, to get the thin film with high adhesion and dense microstructures. In this study ionization rate enhancement type PVD process using permanent magnet is developed, which enhances the ionization rate by confining the plasma suppressing the wall loss of electron. By the result to investigate the characteristic of glow discharge, the ionization rate of this process is enhanced about twice as high as that of triod BARE process (about 26%), and more dense TiN microstructures are obtained in this process. Cylindrical ion energy analyzer is made and attached in front of a quadrupole mass filter for the analysis of the energy distribution of reactive gas and activated gas ions from the plasma zone. To analyze the operation mechanism of ion energy analyzer, computer simulation is performed by calculation the electric field environment using finite element method. By these analyses of ion energy distribution of outcoming ions from the plasma zone, it is found that magnetic field enhances ion kinetic energy as well as ionization rate. The other results of this study is that the foundation of feed-back system is constructed, which automatically control the partial pressure of reactive gas. In can be possible by recording the data of mass spectrum and ion energy analysis using A-D converter.

• Nuclear Engineering and Technology
• /
• 제37권4호
• /
• pp.363-374
• /
• 2005

A heterogeneous thorium-based Kyung Hee Thorium Fuel (KTF) assembly design was assessed for application in the APR-1400 to study the feasibility of using thorium fuel in a conventional pressurized water reactor (PWR). Thermal hydraulic safety was examined for the thorium-based APR-1400 core, focusing on the Departure from Nucleate Boiling Ratio (DNBR) and Large Break Loss of Coolant Accident (LBLOCA) analysis. To satisfy the minimum DNBR (MDNBR) safety limit condition, MDNBR>1.3, a new grid design was adopted, that enabled grids in the seed and blanket assemblies to have different loss coefficients to the coolant flow. The fuel radius of the blanket was enlarged to increase the mass flow rate in the seed channel. Under transient conditions, the MDNBR values for the Beginning of Cycle (BOC), Middle of Cycle (MOC), and End of Cycle (EOC) were 1.367, 1.465, and 1.554, respectively, despite the high power tilt across the seed and blanket. Anticipated transient for the DNBR analysis were simulated at conditions of $112\%$ over-power, $95\%$ flow rate, and $2^{\circ}C$ higher inlet temperature. The maximum peak cladding temperature (PCT) was 1,173K for the severe accident condition of the LBLOCA, while the limit condition was 1,477K. The proliferation resistance potential of the thorium-based core was found to be much higher than that of the conventional $UO_2$ fuel core, $25\%$ larger in Bare Critical Mass (BCM), $60\%$ larger in Spontaneous Neutron Source (SNS), and $155\%$ larger in Thermal Generation (TG) rate; however, the radio-toxicity of the spent fuel was higher than that of $UO_2$ fuel, making it more environmentally unfriendly due to its high burnup rate.

• Journal of Biosystems Engineering
• /
• 제27권5호
• /
• pp.381-390
• /
• 2002

Direct seeding of rice-seed pellets is expected to be an alternative for solving problems in current direct seeding cultivation of rice. but mass production of rice-seed pellets is prerequisite for practical application. Design. construction and performance evaluation of an experimental rice seed pelleting machine were carried out for mass production of rice-seed pellets. The pelleting machine intended to make a ball type rice-seed pellet, which have 3∼5 rice seeds and diameter of which is 12 mm. Pellet materials ; rice seeds, soil, and binder were mixed and kneaded by the mixer. The designed rice seed pelleting machine fed pellet materials by screw conveyor to forming rolls and made rice-seed pellets. Capacity, ratio of perfect rice-seed pellets, seed and pellet material loss were investigated as mixing ratio of soil to rice seed and feeding rate of pellet materials. The pelleting machine showed up to 37,000 pellets/h of pelleting rate, 61∼71% of weight ratio of perfect rice-seed pellets to pellet materials supplied, 17∼48% of seed loss ratio. Average weight and average diameter of the pellets were 1.66 g and 12.0 mm. respectively. More than 3 rice seeds were included in most pellets at 6 : 1 of mixing ratio of soil to rice seed. And compression strength of the pellets was in the range of 88-130 N. To improve performance of the pelleting machine, improvements of the forming rolls, feeding mechanism, and discharging mechanism for reducing loss of pellet materials and seeds damage are needed.

• 한방비만학회지
• /
• 제22권2호
• /
• pp.136-146
• /
• 2022

Objectives: The objective of this study is to evaluate weight change and analyze adverse events in overweight and obese women with polycystic ovary syndrome (PCOS) who were prescribed with Gamitaeeumjowee-tang. Methods: A retrospective chart review was conducted for medical records of patients with PCOS, who were administered with Gamitaeeumjowee-tang for a period of 12 weeks between January 2019 and December 2021. Outcomes were total weight loss/weight loss rate, the percentage of patients who lost more than 5% and 10% of their baseline weight. Adverse events (AEs) reported by patients were evaluated by severity, causality and system-organ classes. Results: A total of sixty-seven patients were included (mean±standard deviation, Age 28.78±5.25 years, weight 76.78±12.84 kg, body mass index 29.2±4.26 kg/m²). The average total weight loss in PCOS patients was 6.57±3.07 kg and the average weight loss rate was 8.55±3.65%. The percentage of patients with more than 5% and 10% weight loss compared to their baseline weight was 86.56% and 25.37% respectively. The analysis of adverse events are as follows: Causality assessment with World Health Organization-Uppsala Monitoring Centre of AEs showed 'Unlikely' was the most common (71.7%) and severity evaluations with Common Terminology Criteria for Adverse Events showed almost all symptoms were mild (98.9%). Conclusions: Gamitaeeumjowee-tang helps to lose weight of PCOS patients, which is overweight or obese, and no serious adverse events have occurred. Additional well-designed clinical studies are recommended.

• 한국유체기계학회 논문집
• /
• 제18권5호
• /
• pp.5-12
• /
• 2015

This paper presents a numerical investigation of the effect of the dihedral stator on the loss in a transonic axial compressor. Four stator geometries with different stacking line variables are tested in the flow simulations over the whole operating range. It is found that a large shroud loss at the rotor outlet and the subsequent shroud corner separation in the stator passage occur at low mass flow rate. The hub dihedral stator and bowed blade generate unexpected hub-corner-separation, thereby causing a large total pressure loss over the entire operating range. However, the corresponding blockage forces the high momentum flow near the hub to divert toward the upper part of the passage suppressing the negative axial velocity region. The dihedral stator increases deflection angle and secondary vorticity near the endwall where the dihedral is applied. As a result, the endwall loss which is related to the endwall relative velocity decreases.