• 한국산림과학회지
• /
• 제98권1호
• /
• pp.125-131
• /
• 2009

산림청에서는 지속가능한 산림경영의 실현과 국내 목재수급 및 우량 목재자원 확보를 위해서 전국 450개 단지, 292만ha의 산림을 경제림육성단지로 지정하고, 경제림육성단지별 관리계획을 수립하도록 하였으며, 이를 통해 각 지자체에서 보다 체계적이고 집약적으로 산림사업을 관리할 수 있도록 유도하고 있다. 현재 우리나라 산림의 대부분은 III, IV영급에 집중되어 있기 때문에 지속가능한 산림경영을 위해서는 이러한 불균형한 영급구조를 개선하는 것이 무엇보다 시급한 과제이다. 본 연구에서는 충북 영동군의 경제림육성단지를 대상으로 이 지역의 산림을 지속가능한 영급구조로 유도할 수 있도록 경영목표를 설정하고, 이를 위해 필요한 벌채수확량을 산출하였다. 벌채수확량의 최적화를 위해서 목표계획법(Goal Programming)을 적용하였으며, 그 결과 연구대상지의 산림을 지속가능한 영급구조로 유도하기 위해서는 50년을 전체사업기간으로 하여 매 분기(10년)별로 약 124만$m^3$의 벌채수확이 필요한 것으로 나타났다. 본 연구결과는 앞으로 영급구조 개선을 위한 관련 정책 및 사업들을 수립하는데 활용될 것으로 기대된다.

• 한국경영과학회:학술대회논문집
• /
• 한국경영과학회 1994년도 추계학술발표회 발표논문집; 연세대학교경영관, 서울; 8 Oct. 1994
• /
• pp.386-392
• /
• 1994

• International Journal of Quality Innovation
• /
• 제6권2호
• /
• pp.31-45
• /
• 2005

The target costing technique, mathematically discussed by Sauers, only uses the $C_p$ index along with Taguchi loss function and ${\bar{X}}-R$ control charts to set up goal control limits. The new specification limits derived from Taguchi loss function is linked through the $C_p$ value to ${\bar{X}}-R$ control charts to obtain goal control limits. This study further considers the reflected normal loss function as well as the $C_{pk}$ index along with its lower confidence interval in forming goal control limits. With the use of lower confidence interval to replace the point estimator of the $C_{pk}$ index and reflected normal loss function proposed by Spiring to measure the loss to society, this modified and improved target costing technique would become more robust and applicable in practice. Finally, an example is provided to illustrate how this modified and improved target costing technique works.

• 경영과정보연구
• /
• 제22권
• /
• pp.211-229
• /
• 2007

The ISO/TS16949 APQP goal of defect prevention and decrease of spread waste, is the customer satisfaction which leads a continuous improvement and profit creation. The quality expense where the most is caused by but with increase of production initial quality problem occurrence is increasing to is actuality. Like this confirmation amendment. with the problem which is forecast in the place development at the initial stage which it does completeness it does not confront not to be able, production phase to be imminent, the problem accumulates and it talks the development shedding of which occurs. In opposition, prediction confrontation. is forecast in development early stage to and it is a structure which does not occur a problem to production early stage. Like this development is a possibility of accomplishing competitive company from production phase. Which attains an goal of, chance cause it leads a APQP activity (common cause) with special cause prevention & detection the connection characteristic of the focus technique against a interaction is important. And the customer requirement satisfaction and must convert a APQP goal of attainment at the key characteristics action step. (1) The Prevention - with Design FMEA application prevention of the present design management/detection, (2) the Detection (prevention/detection) - with Process FMEA application prevention of the present process control/detection, (3) Special Cause - statistical process control (SPC) 4M cause spread removal, (4) Common Cause - statistical process control (SPC) the nothing zero defect which leads the continuous improvement back of spread with application it will be able to attain with application.

• 한국기후변화학회지
• /
• 제8권3호
• /
• pp.221-230
• /
• 2017

There are two main policies to meet the national goal of reducing Greenhouse Gases (GHGs) emissions in Korea towards Paris Agreement. From 2012 to 2014, Target Management System (TMS) was operated and the Emissions Trading Scheme (ETS) has been established since 2015. To compare the impact of TMS and ETS on reducing GHGs, we collected annual GHGs emission reports submitted by individual business entities, and normalized them using a z-variant normalized function. In order to evaluate the impact of those policies, we calculated the amount of GHGs emissions of 73 business entities from 15 business sectors. Those entities emitted $508million\;CO_2eq$, which is 74% of total national GHGs emissions in 2014. The main results of analysis indicate that accumulated GHGs emissions during the period 2012 to 2014 affected by TMS was higher than the national goal of GHGs emission reduction, and only the GHGs emissions in 2014 were in the range of allowed GHGs emissions, set by the Government. In 2015, when ETS initiated, total GHGs emission trading was $4.84million\;tCO_2eq$, which is only 0.9% of total allowance in 2015. However, more than 50% of business entities, who got the allowance of GHGs emission given by the Government, met the goal of GHGs emissions. Particularly, 27 of 73 business entities reduced GHGs more under the ETS rather than the TMS. Even though we analyzed only 4 years' data to demonstrate the impact of TMS and ETS, it is expected to commit the national goal of GHGs reduction target by TMS and ETS.

• International Journal of Quality Innovation
• /
• 제4권1호
• /
• pp.191-204
• /
• 2003

The target costing technique, mathematically discussed by Sauers, only uses the $C_p index along with Taguchi loss function and $\bar{X}$-P control charts to setup goal control limits. The new specification limits derived from Taguchi loss function is linked through the $C_p value to $\bar{X}$-P control charts to obtain goal control limits. Studies have shown that the point estimator of the $C_p index, $C_p, could vary from time to time due to the sampling error. The suggested approach is to use confidence intervals, especially the lower confidence intervals, to replace the point estimator. Therefore, an improvement on target costing technique is presented by applying the lower confidence interval of the $C_p index and using both Taguchi and Spiring's loss functions together with $\bar{X}$-P charts to make this technique more robust in practice. An example is also provided to illustrate how the improved target costing technique works.

• 기술혁신학회지
• /
• 제8권1호
• /
• pp.237-260
• /
• 2005

This paper aims to review and analyse the introduction process of performance management system(PMS) in the R&D sector. It also examines initial problems and future policy directions of the new system. Theory part deals with various approaches to the PMS and the relation between research evaluation and performance management. The paper then describes how the PMS has been introduced in the National R&D Program by the MOST in terms of the contents of strategic goal, performance goal and performance indicator together with their development process. After this, it captures problems arising in the initial phase and then suggests how they should be solved on the ministerial and cross-ministerial level. Discussed are following topics: lack of strategic planning, grouping of heterogeneous sub-programs, duplication between the OMS and other existing research or performance evaluation. The paper finally suggests policy implications using the logic model which has been developed in a series of recent international conferences.

• 한국건설관리학회:학술대회논문집
• /
• 한국건설관리학회 2006년도 정기학술발표대회 논문집
• /
• pp.145-149
• /
• 2006

건축물 수명주기 동안 생성되는 정보를 통합관리하고 재활용하여 경제적 손실을 줄이고 이윤을 극대화하려는 과정을 Building Information Modeling (BIM)이라고 한다. 기존의 건설관리기법들과 비교하여 양질의 건물을 더 싸게 빠르게 지으려고 한다는 점에서 그 궁극적인 목적이 다르지 않지만, 기존의 기법들이 경영관리기법적인 측면에서 접근하였다면, BIM은 시스템적인 면에서 접근을 하고 있다는 데에 그 차이점이 있다. 본 논문은 BIM의 정의와 배경에 대해서 고찰하고, BIM을 위하여 필요한 핵심기술들의 현재와 미래에 대하여 논의하였다.

• 한국건설관리학회논문집
• /
• 제11권1호
• /
• pp.16-28
• /
• 2010

건설 산업은 다양한 프로젝트를 수행하는 수주중심의 산업적 특성상 정형화된 프로세스로 구축하여 운영하는 것이 매우 어렵다. 이에 건설기업의 동적인 업무 변화 특성 수용과 업무개선을 동시에 만족시킬 수 있는 BPM(Business Process Management)의 도입이 대형 건설업체를 중심으로 이루어지고 있는 상황이다. BPM의 특성과 기업의 고유 전략이 상이하기 때문에 일괄적인 적용은 어렵다. 이에 건설 산업의 특성과 프로세스를 이해하고 기업이 추구하는 비전과 목표에 부합하는 업무 프로세스를 우선 선정하여 적용하는 것이 필요하다. 본 연구에서는 기존 연구 고찰을 통하여 BPM 우선 적용 대상 프로세스 선정방안의 필요성을 제시하고, 건설기업 업무 프로세스 분석을 통해서 건설기업의 BPA를 구축하였다. 국내 건설기업의 전략목표 우선순위 파악을 통하여 높은 우선순위를 가지는 것으로 도출된 수익성과 성장성의 관점에서 핵심 업무 프로세스를 도출하였다. 또한 BPM 적용대상 프로세스 평가 기준을 6가지로 제시하여 이를 바탕으로 핵심 업무 프로세스를 평가하여 BPM 우선 적용 대상 프로세스를 도출하였다.

• 지식경영연구
• /
• 제12권1호
• /
• pp.17-37
• /
• 2011

This paper is aimed at investigating the influence of the learning organization's structural characteristics, learner's characteristics, and perceived organizational support (POS) on organizational knowledge creation. also the POS is tested as a moderator on the relationship between learner's characteristics including learning goal orientation and learning self-efficacy and organizational knowledge creation. the results are as follows. for main effect hypotheses, both connecting the organization to its environment and establishing systems to capture and share learning system representing learning organization's structural characteristics have significant positive impact on organizational knowledge creation. the POS also has a significant impact on organizational knowledge creation. However, learning goal orientation and learning self-efficacy have not significant impact on organizational knowledge creation. for moderating effect hypothesis, POS moderates the relationship between learning goal orientation and organizational knowledge creation, which means if the POS is high then learning goal orientation has more significant positive impact on it. Based on our findings, we conclude that structural characteristics of learning organization provide organizations with an opportunity of knowledge creation. in particular, interconnectedness of organization with environment and organizational knowledge sharing systems determine the ways of behaving that are related to learning within organizations. however, learner's characteristics did not have a significant effect on organizational knowledge creation, which could be interpreted due to the fact that employees are not motivated to create new knowledge if they are rarely required to involve challenging works, generate new knowledge, or share preexisted knowledge with others.