• 소성∙가공
• /
• 제27권6호
• /
• pp.347-355
• /
• 2018

This study investigated the effects of the processing number of multi-axial diagonal forging (MADF) on the microstructural changes of OFC fabricated by MADF processes. The as-extruded OFC was cut to $25mm^3$ cube for the MADF processes. The MADF process consists of plane forging with a thickness reduction of 30% and diagonal forging with a diagonal forging angle of $135^{\circ}$. In order to analyze the microstructural evolutions according to the number of repetitions, 1, 2, 3 and 4 cycles of the MADF process were performed. OFC specimens were successfully deformed without surface cracking for up to 4 cycles of MADF. The grain size, average misorientation and average grain orientation spread (GOS) of MADF processed materials were analyzed using EBSD technique and their Vicker's hardness were also measured. The results showed that MADF process effectively refined the microstructure of OFC with initial average grain size of $84.2{\mu}m$. The average grain sizes of specimens MADF processed for 1, 2, 3, 4 cycles were refined to be $8.5{\mu}m$, $2.2{\mu}m$, $1.5{\mu}m$, $1.1{\mu}m$, respectively. The grain refinement seemed to be saturated when OFC was MADF processed over 2 cycles. In the case of specimens subjected to two or more cycles of MADF, the degree of decrease in average grain size was drastically reduced as the number of cycles increased due to softening phenomena such as dynamic recovery or dynamic recrystallization during processing. The degree of increase in average Vicker's hardness was also dramatically reduced as the number of cycles increased due to the same reason.

• 소성∙가공
• /
• 제28권2호
• /
• pp.63-70
• /
• 2019

This study investigates the effects of multi-axial diagonal forging (MADF) processing number on the microstructures of AA1100 fabricated using MADF processes. The cast AA1100 was annealed at $400^{\circ}C$ for 3hrs in $N_2$ atmosphere and cut into $25mm^3$ cubes for the MADF processes. The MADF process consist of plane forging with a thickness reduction of 30% and a diagonal forging with a diagonal forging angle of 135 degrees. In order to analyze the microstructural variations based on the number of repetitions, 1, 2, 3 and 4 cycles of the MADF process were performed. AA1100 specimens were successfully deformed without cracking of the surface for up to 4 cycles of MADF. The grain size, average misorientation and average grain orientation spread (GOS) of MADF processed materials were analyzed using EBSD technique. The results showed that MADF process effectively refined the microstructure of AA1100 with an initial average grain size of $337.4{\mu}m$. The average grain sizes of specimens which were MADF processed for 2, 3, 4 cycles were refined to be $1.9{\mu}m$, $1.6{\mu}m$, $1.4{\mu}m$, respectively. The grain refinement appeared saturated when AA1100 got MADF processed over 2 cycles. When the specimen was subjected to two or more cycles of MADF, the degree of decrease in the average grain size drastically decreased with an increase in the number of cycle due to the softening phenomena such as dynamic recovery or dynamic recrystallization during processing.

• 소성∙가공
• /
• 제27권4호
• /
• pp.250-256
• /
• 2018

Oxygen-free copper (OFC) was prepared as a 90 mm cube and then processed with Multi-Axial Diagonal Forging - Initialization of Prior manufacturing History (MADF). The MADF process has been newly developed as a severe plastic deformation method. The MADF process consists of upset forging with a thickness reduction of 30% and diagonal forging with a diagonal angle of $135^{\circ}$. 1 cycle process consists of a 12 passes forging process. In order to analyze the characteristic changes according to the number of iterations, 1, 2, and 3 cycles of the MADF process were performed. The OFC specimens were MADF processed without surface cracks up to 3 cycles. The microstructure, hardness and tensile test of processed materials were analyzed to study the change of material properties according to the amount of MADF process. The results showed that the MADF process effectively refined the microstructure and increased the strength of OFC. In the case of specimens processed for more than 2 cycles, the grains of all measurement regions were refined to be less than $7{\mu}m$ of grain size. The 1 cycle MADF processed OFC showed the highest mechanical properties with the hardness of 132 HV and tensile strength of 395 MPa. Hardness and strength seemed to be saturated when processed over 2 cycles.

• 한국통신학회논문지
• /
• 제18권6호
• /
• pp.815-823
• /
• 1993

본 논문에서는 곱셈연산이 필요치 안은 변형 비적 적응필터(MMADF : Modified Multiplication-free adaptive Filter) 알고리즘을 제안하고 수렴특성을 해석하였다. 제안한 구조는 DPCM(Differential Pulse Code Modulation)과 Sign 알고리듬을 이용한 MADF 구조에서 1차 필터를 첨가한 구조이다. 해석방법은 계수 비정렬벡터와 그 자기상관행렬의 수렴을 유도하였다. 수렴특성을 평가하기 위하여 분할등기(FSE : Fractionally Spaced Equallizer)에 적용하였으며, Sign 알고리듬, MADF 알고리듬, MMADF 알고리듬을 사용하여 정상상태오차와 수렴속도로 특성을 비교평가 하였다. MMADF 알고리듬을 FSE에 적용한 결과 안정된 수렴특성을 나타내었으며, 동일한 정상상태오차를 갖는 조건에서 시뮬레이션한 결과 기존의 Sign 및 MADF 알고리듬에 비해 신호특성 및 수렴속도가 개선 되었다.

• 소성∙가공
• /
• 제30권6호
• /
• pp.306-310
• /
• 2021

In this study, IF steel, which has a body-centered cubic (BCC) crystal structure, was fabricated as a 25 mm-long cube, and then processed for one cycle without intermediate heat treatment by applying MADF Ver.1 and Ver.2 processes. MADF processing was performed with graphite lubrication for each pass at room temperature. The development of the microstructure and texture was analyzed and compared by the location of the specimen using EBSD measurements of the IF steel. Vickers hardness test and miniature tensile test were also performed to analyze the mechanical properties. The coarse grain size of 742.6 ㎛ of the as-received IF steel was refined to a grain size of 53.0 ㎛ after one cycle of MADF Ver.1 processing and 27.0 ㎛ after MADF Ver.2 processing. Vicker's hardness of the as-received IF steel at 94 Hv was increased to 185.6 Hv and 191.2 Hv after one cycle of MADF Ver.1 and Ver.2 processing, respectively.

• 한국통신학회논문지
• /
• 제24권9A호
• /
• pp.1346-1353
• /
• 1999

본 논문은 맥파검출기의 채널에서 발생하는 상호신호간섭이나 잡음을 제거하기 위하여 비적적응필터(MADF)알고리듬을 제안한다. 이 알고리듬은 맥파가 저주파이고 매우 천천히 변하는 환경하에서 기존의 Sign알고리듬보다 유리한 성능을 가지며, 이를 이용하여 분할등화기를 구현하였다.

• 전자공학회논문지B
• /
• 제30B권6호
• /
• pp.28-34
• /
• 1993

An algorithm for MMADF(modified multiplication-free adaptive filter) which need not to multiplication arithmatic operation is proposed to improve the performance of FSE (fractionally spaced equalizer) which reduce the ISI(intersymbol interference) in signal transfer channel. The input signals are quantized using DPCM and the reference signals is processed using a first-order linear prediction filter. The convergence properties of Sign. MADF and M-MADF algorithm for updating of the coefficients of a FIR digital filter of the fractionally spaced equalizer (FSE) are investigated and compared with one another. The convergence properties are characterized by the steady state error and the convergence speed. It is shown that the convergence speed of M-MADF is almost same as Sign algorithm and is faster than MADF in the condition of same steady state error. Especially it is very useful for high correlated signals.

• 대한전자공학회논문지SP
• /
• 제39권2호
• /
• pp.137-146
• /
• 2002

데이터 전송채널에서 부호간간섭(ISI)을 제거하기 위해 개선된 비적적응 디지털필터(IMADF)의 구조와 수렴해석이 이루어진다. 0평균, 백색잠음하에서 분할등화기(FSE)를 이용한 IMADF의 수렴특성을 해석한다. 실험결과 IMADF 알고리즘의 수렴독성이 Sign 알고리즘과는 같으나, MADF 알고리즘 보다 우수하다. 특히 입력신호의 상관관계가 높을 때 유용한 특성을 갖는다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 ITC-CSCC -1
• /
• pp.500-503
• /
• 2002

Biomedical signals are ubiquitously contaminated and degraded by background noise which span nearly all frequency bandwidths. This paper proposes the MADF (multiplication free adaptive digital filter) algorithm to cancel the noise. And the convergence characteristics of the algorithm is analyzed. In the experimental results, the MADF algorithm has the advantage in which has superior to a condition of low-frequency and slow data speed. This application gives an important significance in ensuring the objectivity of clinical information and in promoting the representation and the disease diagnosis.

• 대한전자공학회논문지SD
• /
• 제46권1호
• /
• pp.59-67
• /
• 2009

본 논문에서 생체신호의 적응잡음을 제거하기 위해 개선된 비적적응필터(IMADF) 알고리즘을 제안한다. IMADF 구조는 DPCM과 Sign 알고리즘을 사용한 MADF에 1차 예측 필터를 사용한다. 그때 생체신호를 시험하기 위해서 MCG(심자도)에 기반한 심장팬텀 모델을 사용하고 신호를 분석한다. 심장팬텀의 기능들은 다극점 전류원으로부터 만들어진다. 이것은 인간의 심장과 똑같은 기능을 수행하는 역할을 한다 실험결과 IMADF 알고리즘은 곱셈동작이 없고 덧셈동작만 MADF 알고리즘보다 2개 더 늘어났으나, 훨씬 안전한 수렴특성을 나타냈고, 계산상을 복잡성도 줄이는 결과를 얻었다.