• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.45 no.6
• /
• pp.33-44
• /
• 2008

Multipath routing protocols with load balance, fault tolerance, aggregated bandwidth in Ad-hoc Networks provide improved throughput and reliable route as compared with singlepath routing protocols. However, multipath routing protocols have not been explored thoroughly in the domain of overhead in Ad-hoc Networks. In this paper, we analyze and compare on-demand singlepath and multipath routing with IEEE 802.11 DCF in terms of Routing overhead and MAC overhead. The results reveals that in comparison with singlepath routing protocol, multipath routing mechanism creates more overheads but provides better performance in congestion and capacity provided that the route length is within a certain upper bound which is derivable. The analytical results are further confirmed by simulation.

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.24 no.1
• /
• pp.42-47
• /
• 2010

The pulse diagnosis is an important method in Oriental Medicine. Recently, there have been continuous attempts to replace the finger palpation by Oriental medical doctors (OMDs) by more objective tools based on machines, e.g., pulse analyzers. To improve the performance of the pulse analyzers, both the machine-appropriate interpretations for the pulse images appeared in the literature and the improvement in the repeatability and reproducibility of the measurement sensors are to be developed. As an attempt towards the transformation of the pulse images in terms of machine-appropriate language, in this work, we suggest an upgraded algorithm for the solid/deficient pulses, which are the two representative pulse images informing us how strong the pulse pressure is. It has been argued that one could determine the solid/deficient pulses by the maximum pulse pressure from pulse analyzers. However, by a clinical test, we found that the maximum pulse pressure alone is not sufficient to determine the solid/deficient pulses. In addition to the maximum pulse pressure, the mean pulse pressure averaged over for five different hold-down pressures(3-D MAC) is needed to improve the agreement with the OMD's decision for the solid/deficient pulse. We found that, among the data diagnosed with having either the solid pulse or deficient pulse by OMDs, the novel algorithm showed 86.0% diagnosis rate and 81.6% concordance rate.

• Smart Structures and Systems
• /
• v.26 no.4
• /
• pp.451-468
• /
• 2020

Although model updating has been widely applied using a specific optimization algorithm with a single objective function using frequencies, mode shapes or frequency response functions, there are few studies that investigate hybrid optimization algorithms for real structures. Many of them did not take into account the sensitivity of the updating parameters to the model outputs. Therefore, in this paper, optimization algorithms and sensitivity analysis are applied for model updating of a real cable-stayed bridge, i.e., the Kien bridge in Vietnam, based on experimental data. First, a global sensitivity analysis using Morris method is employed to find out the most sensitive parameters among twenty surveyed parameters based on the outputs of a Finite Element (FE) model. Then, an objective function related to the differences between frequencies, and mode shapes by means of MAC, COMAC and eCOMAC indices, is introduced. Three metaheuristic algorithms, namely Gravitational Search Algorithm (GSA), Particle Swarm Optimization algorithm (PSO) and hybrid PSOGSA algorithm, are applied to minimize the difference between simulation and experimental results. A laboratory pipe and Kien bridge are used to validate the proposed approach. Efficiency and reliability of the proposed algorithms are investigated by comparing their convergence rate, computational time, errors in frequencies and mode shapes with experimental data. From the results, PSO and PSOGSA show good performance and are suitable for complex and time-consuming analysis such as model updating of a real cable-stayed bridge. Meanwhile, GSA shows a slow convergence for the same number of population and iterations as PSO and PSOGSA.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.11 no.2
• /
• pp.687-708
• /
• 2017

The machine-to-machine (M2M) communication is featured by tremendous number of devices, small data transmission, and large uplink to downlink traffic ratio. The massive access requests generated by M2M devices would result in the current medium access control (MAC) protocol in LTE/LTE-A networks suffering from physical random access channel (PRACH) overload, high signaling overhead, and resource underutilization. As such, fairness should be carefully considered when M2M traffic coexists with human-to-human (H2H) traffic. To tackle these problems, we propose an adaptive Slotted ALOHA (S-ALOHA) and time division multiple access (TDMA) hybrid protocol. In particular, the proposed hybrid protocol divides the reserved uplink resource blocks (RBs) in a transmission cycle into the S-ALOHA part for M2M traffic with small-size packets and the TDMA part for H2H traffic with large-size packets. Adaptive resource allocation and access class barring (ACB) are exploited and optimized to maximize the channel utility with fairness constraint. Moreover, an upper performance bound for the proposed hybrid protocol is provided by performing the system equilibrium analysis. Simulation results demonstrate that, compared with pure S-ALOHA and pure TDMA protocol under a target fairness constraint of 0.9, our proposed hybrid protocol can improve the capacity by at least 9.44% when ${\lambda}_1:{\lambda}_2=1:1$and by at least 20.53% when ${\lambda}_1:{\lambda}_2=10:1$, where ${\lambda}_1,{\lambda}_2$ are traffic arrival rates of M2M and H2H traffic, respectively.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.4A
• /
• pp.412-420
• /
• 2006

With the appearance of various types of traffic services in communication networks, a study on QoS(Quality of Service) packet scheduling mechanisms which can support differentiated service to each traffic service becomes very important. To meet this requirement, IEEE 802.11 Working Group established the IEEE 802.11e MAC protocol which categorizes every traffic services into 4 access categories(AC) and provides the differentiated service to each AC. In addition, the physical layer of IEEE 802.11a/g standards provide up to 54 Mbps transmission rate per one wireless LAN terminal. However, since the radio resource is hardly limited in wireless channel, it is necessary to find an efficient packet scheduling scheme to maximize the transmission efficiency. Therefore, in this paper, we proposed a new packet scheduling scheme that can enhance the total throughput by setting different contention windows(CW) of CSMA-CA channel access scheme to each wireless LAN terminal according its current channel states. Numerical results derived from using NS-2 network simulator have shown that our proposed packet scheduling scheme can enhance the performance of IEEE 802.11e more and more.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.9B
• /
• pp.785-791
• /
• 2006

A CF-Poll frame which contains the channel reservation time can be piggybacked in QoS-Data frame to increase the channel efficiency in HCCA. However, if any QSTA in the network uses the low physical transmission rate, the QoS-Data frame which includes the CF-Poll frame must be transmitted by the minimum transmission rate. Therefore, it can cause the decrease of the channel efficiency and the increase of the frame transmission delay for other traffic streams when any QSTA has the low physical transmission rate. In this paper, we define this phenomenon as the piggyback problem at the low physical transmission rate and evaluate the effect of this problem. In the simulation results, when a CF-Poll piggyback is used, the delay is increased about 25% if any QSTA has the low physical transmission rate, while the delay is decreased about 7.8% if all QSTA has the high physical transmission rate. We also found that the gain of the CF-Poll piggyback mechanism is achieved when all QSTA has higher physical transmission rate than 24 or 36Mbps.

• Journal of the Institute of Convergence Signal Processing
• /
• v.9 no.1
• /
• pp.39-45
• /
• 2008

This paper considers the multi-objective optimization of a multi-service arrayed waveguide grating-based single-hop WDM network with the two conflicting objectives of maximizing throughput while minimizing delay. This paper presents a genetic algorithm based methodology for finding the optimal throughput-delay tradeoff curve, the so-called Pareto-optimal frontier. Genetic algorithm based methodology provides the network architecture parameters and the Medium Access Control protocol parameters that achieve the Pareto-optima in a computationally efficient manner. The numerical results obtained with this methodology provide the Pareto-optimal network planning and operation solution for a wide range of traffic scenarios. The presented methodology is applicable to other networks with a similar throughput-delay tradeoff.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2003.05a
• /
• pp.905-910
• /
• 2003

One of the methods that are used to compare and verify the supporting performance of the spacer grids developed is the vibration characteristic test. A modal test in this paper is performed for a dummy rod 3,847mm tall supported by eight New Doublet (ND) spacer grids. For the vibration test in air, nine accelerometers, one displacement sensor and one shaker are used for acquiring signals, and an I-DEAS TDAS software is employed for analyzing the signals. Also, a finite element (FE) analysis is performed by a beam-spring simple model and a contact model simulating the contact phenomenon between the rod and the fm spring. And then, the result of the FE analysis is compared with that of the modal test. The natural frequencies as well as the mode shapes calculated by the proposed contact models have a greater similarity to the test results than those by the previous beam-spring model. In addition, for grasping whether or not the modal parameters are influenced by where shaking spot is, two kinds of tests are performed; one is for the shaker attached at the fourth span (center), the other is for the shaker at the fifth span that is one span nearer to the bottom of the rod. The latter shows higher MAC than the former. Finally, the vibration displacements are measured in the range of 0.112-0.214mm for the excitation force of 0.25-0.75 N.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.3B
• /
• pp.135-143
• /
• 2008

In this paper, we propose a QoS guaranteed and energy-efficient transmission scheme for Wireless Personal Area Networks (WPANs), which operate in conjunction with contention-based access protocols such as CSMA/CA. Energy consumption is one of the most important issues in WPAN systems, because WPAN devices are often required to operate under limited battery capacity. Furthermore, if the WPAN adopts a contention-based medium access protocol, the energy consumption problem becomes even more critical due to the collisions caused by independent channel access trials. Therefore, in this paper, we propose an algorithm that selects the optimum fragment size, modulation level, and transmission power, in order to minimize the energy consumption and guaranteethe QoS (Quality of Service) requirements, simultaneously. Our simulation results show that the proposed algorithm has better performance than the previous ones.

• Journal of Ship and Ocean Technology
• /
• v.12 no.1
• /
• pp.16-27
• /
• 2008

The interaction between advancing ships and the waves generated by them plays important roles in wave resistances and ship motions. Wave breaking phenomena near the ship bow at different speeds are investigated both numerically and experimentally. Numerical simulations of free surface profiles near the fore bodies of ships are performed and visualized to grasp the general trend or the mechanism of wave breaking phenomena from moderate waves rather than concentrating on local chaotic irregularities as ship speeds increase. Navier-Stokes equations are differentiated based on the finite difference method. The Marker and Cell (MAC) Method and Marker-Density Method are employed, and they are compared for the description of free surface conditions associated with the governing equations. Extra effort has been directed toward the realization of extremely complex free surface conditions at wave breaking. For this purpose, the air-water interface is treated with marker density, which is used for two layer flows of fluids with different properties. Adaptation schemes and refinement of the numerical grid system are also used at local complex flows to improve the accuracy of the solutions. In addition to numerical simulations, various model tests are performed in a ship model towing tank. The results are compared with numerical calculations for verification and for realizing better, more efficient research performance. It is expected that the present research results regarding wave breaking and the geometry of the fore body of ship will facilitate better hull form design productivity at the preliminary ship design stage, especially in the case of small and fast ship design. Also, the obtained knowledge on the impact due to the interaction of breaking waves and an advancing hull surface is expected to be applicable to investigation of the ship bow slamming problem as a specific application.