• Structural Engineering and Mechanics
• /
• 제82권6호
• /
• pp.771-783
• /
• 2022

Structural damage identification (SDI) methods have been proposed to monitor the safety of structures. However, the traditional SDI methods using modal parameters, such as natural frequencies and mode shapes, are not sensitive enough to structural damage. To tackle this problem, this paper proposes a new SDI method based on transmissibility assurance criterion (TAC) and weighted Schatten-p norm regularization. Firstly, the transmissibility function (TF) has been proved a useful damage index, which can effectively detect structural damage under unknown excitations. Inspired by the modal assurance criterion (MAC), TF and MAC are combined to construct a new damage index, so called as TAC, which is introduced into the objective function together with modal parameters. In addition, the weighted Schatten-p norm regularization method is adopted to improve the ill-posedness of the SDI inverse problem. To evaluate the effectiveness of the proposed method, some numerical simulations and experimental studies in laboratory are carried out. The results show that the proposed method has a high SDI accuracy, especially for weak damages of structures, it can precisely achieve damage locations and quantifications with a good robustness.

• Structural Monitoring and Maintenance
• /
• 제4권3호
• /
• pp.221-236
• /
• 2017

In this study, the feasibility of vibration-based damage alarming algorithms are numerically evaluated for wind turbine tower structures which are subjected to harmonic force excitation. Firstly, the algorithm of vibration-based damage alarming for the wind turbine tower (WTT) is visited. The natural frequency change, modal assurance criterion (MAC) and frequency-response-ratio assurance criterion (FRRAC) are utilized to recognize changes in dynamic characteristics due to a structural damage. Secondly, a finite element model based on a real wind turbine tower is established in a structural analysis program, Midas FEA. The harmonic force is applied at the rotor level as presence of excitation. Several structural damage scenarios are numerically simulated in segmental joints of the wind turbine model. Finally, the natural frequency change, MAC and FRRAC algorithm are employed to identify the structural damage occurred in the finite element model. The results show that these criteria could be used as promising damage existence indicators for the damage alarming in wind turbine supporting structures.

• Smart Structures and Systems
• /
• 제18권4호
• /
• pp.819-837
• /
• 2016

The quality of vibration pattern reproduction of elastic structures by the modal expansion method is influenced by the modal expansion method and the sensor placement as well as the accuracy of measured natural modes and the total number of vibration sensors. In this context, this paper presents an improved numerical method for reproducing the vibration patterns by introducing a block-wise modal expansion method (BMEM), together with the genetic algorithm (GA). For a given number of vibration sensors, the sensor positions are determined by an evolutionary optimization using GA and the modal assurance criterion (MAC). Meanwhile, for the proposed block-wise modal expansion, a whole frequency range of interest is divided into several overlapped frequency blocks and the vibration field reproduction is made block by block with different natural modes and different modal participation factors. A hollow cylindrical tank is taken to illustrate the proposed improved modal expansion method. Through the numerical experiments, the proposed method is compared with several conventional methods to justify that the proposed method provides the improved results.

• 한국소음진동공학회논문집
• /
• 제25권5호
• /
• pp.329-336
• /
• 2015

This paper presents a sorting method of mode vectors and natural frequencies about a rotor-journal bearing system. The rotor is solved by the finite element method, the bearing stiffness and damping coefficient are solved by the finite difference method. At any rotation speed section through the eigenvalue analysis of the system, mode vectors and natural frequencies not sorted are confirmed via the Campbell diagram and the MAC(modal assurance criterion). To sort mode vectors and natural frequencies of the section, a mode sorting method is presented through a method of rearranging the MAC of the mode vectors. Finally, the mode vectors and the natural frequencies are sorted by using the presented method, these are verified through the MAC.

• Structural Engineering and Mechanics
• /
• 제73권1호
• /
• pp.27-35
• /
• 2020

In rail industry, noise reduction is a concern to decrease environmental pollution. The current study focuses on rail damper modeling and improvement of the model through validation with experimental results. Accurate modeling and simulation of rail dampers, specifically tuned rail dampers with layers interconnected by bolt joints, shall enable objective-oriented improvement of their design. In this work, to improve the damper model cone pressure theory is applied in the FE model and the sensitivity analysis is then applied to gradually improve the FE model. The improved model yields higher Modal Assurance Criterion (MAC) values and lower frequencies deviation.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2001년도 추계학술대회논문집 II
• /
• pp.665-670
• /
• 2001

The purpose of this paper is to verify a finite element model of an automotive exhaust system using Modal testing. In general, a lot of finite element models are used in initial design step of automotive development. One of them is a finite element model of an exhaust system. Verification on the finite element model of an automotive exhaust system is indispensable. In this paper, a finite element analysis on the exhaust system using MSC/NASTRAN is carried out, and the results are compared with those obtained by modal testing. By comparing MAC values of the analytical modes with the experimental modes, the finite element model of the automotive exhaust system is verified.

• 한국항공우주학회지
• /
• 제37권2호
• /
• pp.131-138
• /
• 2009

해석용 모델의 검증이란 완성된 모델이 실제 제품의 특성을 반영하고 있는지에 대한 확인절차이다. 일반적으로 해석모델작성 시 형상의 단순화 및 비선형특성의 반영에 대한 한계 등으로 공학적 가정을 이용하므로 실제 구조와는 다른 물리적, 기계적 특성을 갖게 된다. 본 연구에서는 순차적 2차계획법(Sequential Quadratic Programming, SQP)을 이용하는 목표달성기법(Goal-Attainment Method)의 다목적 최적화 기법을 이용하여 활공체 날개의 정적 처짐과 고유진동수 차이를 최소화하는 방법으로 구조모델의 최신화를 수행하였으며, 모드형상의 일치성을 정량적으로 판단하기 위하여 Modal Assurance Criterion(MAC)를 이용하였다.

• 한국소음진동공학회논문집
• /
• 제25권10호
• /
• pp.677-684
• /
• 2015

It is often necessary to predict the vibration patterns of the structures from the signals of finite number of vibration sensors. This study presents the optimal placement of vibration sensors by applying the genetic algorithm and the modal expansion method. The modal expansion method is used to estimate the vibration response of the whole structure. The genetic algorithm is used to estimate the optimal placement of vibration sensors. Optimal sensor placement can be obtained so that the fitness function is minimized in the genetic algorithm. This paper discusses the comparison of the performances of two types of fitness functions, modal assurance criteria(MAC) and condition number( CN). As a result, the estimation using MAC shows better performance than using CN.

• 한국강구조학회 논문집
• /
• 제9권4호통권33호
• /
• pp.467-477
• /
• 1997

모달실험 기법의 강부재 손상발견 적용성에 대한 실험적 연구를 수행하였다. 단경간 및 2경간 강재보에 손상을 모사한 단계적인 절단을 가하면서 모달실험을 반복하고, 손상 정도에 따른 모달 파라미터의 변화를 관찰하였으며, 실험 결과를 검증할 목적으로 수치해석을 병행하였다. 고려한 모달 파라미터는 고유진동수(Frequency), 변위 모드형상(Displacement Mode Shape), 변형률 모드형상(Strain Mode Shape)이며, 이들 모달 파라미터를 구하기 위하여 가속도계와 변형률계를 사용한 모달실험을 실시하였다. 각각의 손상단계에서 손상에 의한 변위 모드형상과 변형률 모드형상의 변화를 위치에 대해 정량적으로 나타내기 위하여, CoMAC과 Modal Vector Error를 사용하였다. 고유진동수는 손상의 정도가 심해짐에 따라 감소하는 경향을 보였으며, 손상의 위치를 발견하는 데에 가장 효과적으로 사용될 수 있는 것은 변형률 모드형상이었다.

• Structural Engineering and Mechanics
• /
• 제37권6호
• /
• pp.671-684
• /
• 2011

Deciding on an optimal sensor placement (OSP) is a common problem encountered in many engineering applications and is also a critical issue in the construction and implementation of an effective structural health monitoring (SHM) system. The present study focuses with techniques for selecting optimal sensor locations in a sensor network designed to monitor the health condition of Dalian World Trade Building which is the tallest in the northeast of China. Since the number of degree-of-freedom (DOF) of the building structure is too large, multi-modes should be selected to describe the dynamic behavior of a structural system with sufficient accuracy to allow its health state to be determined effectively. However, it's difficult to accurately distinguish the translational and rotational modes for the flexible structures with closely spaced modes by the modal participation mass ratios. In this paper, a new method of the OSP that computing the mode shape matrix in the weak axis of structure by the simplified multi-DOF system was presented based on the equivalent rigidity parameter identification method. The initial sensor assignment was obtained by the QR-factorization of the structural mode shape matrix. Taking the maximum off-diagonal element of the modal assurance criterion (MAC) matrix as a target function, one more sensor was added each time until the maximum off-diagonal element of the MAC reaches the threshold. Considering the economic factors, the final plan of sensor placement was determined. The numerical example demonstrated the feasibility and effectiveness of the proposed scheme.