• Clinical and Experimental Pediatrics
• /
• v.50 no.7
• /
• pp.672-677
• /
• 2007

Purpose : To assess the prevalence and characteristics of headache comorbidity with epilepsy in children and adolescents in a specialty epilepsy clinic. Methods : Two hundred twenty nine consecutive patients attending the Chosun University Hospital Pediatric Epilepsy Clinic (mean age $10.0{\pm}4.1\;years$, range 4-17, M:F ratio 1.1:1.0) were interviewed with a standardized headache questionnaire. Headache was classified according to the International Classification of Headache Disorders, 2nd Edition and epilepsy was classified according to the International League Against Epilepsy. Disability was assessed using pediatric migraine disability assessment (PedMIDAS). Results : Of the 229 epilepsy patients, 86 (37.6%) had co-morbid headache. Of the headache patients, 64 (74.4%) had migraine (65.6%- migraine without aura, 20.3% - migraine with aura, 14.1% - probable migraine). The mean headache frequency was $7.2{\pm}8.4$ per month, mean duration was $2.2{\pm}4.0$ hours, mean severity was $5.2{\pm}2.2$ out of 10, and mean PedMIDAS score was $13.0{\pm}35.4$. The proportion of females was not higher in epilepsy with headache patients (48.8%) compared to epilepsy patients alone (48.0%). In the patients with migraine, 48.4% had complex partial seizures, 17.2% had simple partial seizures, and 34.4% had generalized seizures (P=0.368). A postictal association of migraine was reported in 18.8% with 17.2% reporting a preictal headache, and 7.8% reporting an ictal headache. Conclusion : The prevalence of headache in pediatric epilepsy is higher than that in general pediatric population, suggesting a co-morbidity of headache in epilepsy patients with migraine being the most frequent headache disorder. Altered cerebral excitability resulting in an increased occurrence of spreading depression may explain the headache comorbidity with epilepsy. Further studies are needed to assess the etiology of this co-morbidity as well as assess the frequency, duration, severity and disability response to antiepileptic drugs.

• Clinical and Experimental Pediatrics
• /
• v.50 no.3
• /
• pp.241-247
• /
• 2007

Purpose : Congenital muscular torticollis (CMT) is a common and benign congenital disorder of the musculoskeletal system in neonates and infants. The pathophysiology is that the sternocleidomastoid muscle (SCM) is shortened on the involved side by fibrosis, leading to ipsilateral tilt and contralateral rotation of the face and chin. In this study, we investigated the clinical features of CMT, the role of ultrasonography (USG) in prediction of prognoses and the clinical significance of early detection and treatment. Methods : Forty seven patients (M:F=31:16) were diagnosed as a CMT between March 2003 and May 2006. We reviewed age at diagnosis, physical findings, USG findings, treatment and therapeutic outcome from their medical records. Results : The median age at diagnosis was 90 days (18 days-9 years, 7 months) and the right side of neck was affected in more patients (right : left=26:21). Of 24 patients with a palpable neck mass, 21 had USG; 19 cases showed sternocleidomastoid tumor (SMT). In cases with no neck mass, USG was performed in 11 patients; seven had postural torticollis (POST), three had SMT and one had muscular torticollis (MT). Among 40 patients with follow-up, 36 had total resolution. There was negative correlation between the age at diagnosis and the recovery time, whereas the final outcome was not correlated with USG findings. However, the patients without positive findings in USG had earlier resolution (1 month vs 2.6 months, P=0.0008). The patients with SMT had earlier diagnosis and excellent outcomes. The patients with MT were delayed to diagnosis and had the longest time to resolve. Lastly, the patients with POST had delayed diagnoses, but they had excellent outcomes. Conclusion : Since the patients with delayed diagnoses, in despite of benign courses, may take a long time to resolve and rarely need surgical treatment, it is important to diagnose and treat early. This study showed that USG findings of the SCM may be used as predictive factors.

• Clinical and Experimental Pediatrics
• /
• v.50 no.10
• /
• pp.1011-1017
• /
• 2007

Purpose : We tried to assess the optimal conditions to improve low transduction efficiency and their effect on target cells. Methods : Cultured NIH 3T3 cells were incubated with retroviral vectors bearing an enhanced green fluorescent protein (eGFP) gene. We varied the ratio of viral vectors to target cells (1:1-1:8) and the number of transfections (${\times}1$, ${\times}2$), and compared transduction efficiencies. Also, the effects of polybrene on transduction efficiency and viability of target cells were assessed. Transduction of the eGFP gene was evaluated by observing NIH 3T3 cells under a fluorescence microscope and efficiencies were measured by the percentage of eGFP positive cells using FACscan. Results : As the ratio of retroviral vectors to target cells increased, transduction efficiency was greatly improved, from 7% (1:1) to 38% (1:4). However, transduction efficiency did not increase any more when the ratio increased from 1:4 to 1:8. Cells transfected twice showed higher transduction efficiencies than cells transfected once, at a ratio of 1:8. The eGFP gene transduced to NIH 3T3 cells sustained its expression during repeated passages. However, after the third passage (day 9), the percentage of eGFP positive cells began to decline. The degree of this decline in eGFP expression was lower in cells transfected twice than in cells transfected once (P<0.05). The addition of polybrene did not have any toxic effect on NIH 3T3 cells and greatly increased transduction efficiency (P=0.007). In addition to vector component, transduction efficiency was very sensitive to culture confluence. Cells cultured and transfected in 24-well plate showed higher transduction efficiency, although cells cultured in 6- well plate proliferated more (P=0.024). Conclusion : Our data could be used as a basis for retrovirus-based gene therapy. Further study will follow using human cells as target cells.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.34 no.9
• /
• pp.1297-1301
• /
• 2005

This study was carried to develop the new functional food material by exploring natural antioxidant substances of Crotalaria sessiflora L. We compared antioxidative activity of potential antioxidant substances extracted from Crotalaria sessiflora L. The order of extract yield of Crotalaria sessiflora L. were stem > loaves > seed > root. Antioxidative activities of Crotalaria sessiflora L. were measured by total polyphenol contents EDA (electron donating activity), SOD (superoxide dismutase) -like activity, hydroxyl radical scavenging ability and hydrogen peroxide radical scavenging ability. Total polyphenol acid content was much higher in leaves Ex than other extracts. And leaves Ex showed the most excellent antioxidative activity ($86.27\%$) in terms of SOD-like activity. The EDA was ordered loaves Ex > stem Ex > seed Ex > root Ex. Hydroxy radical scavenging ability was the most effective in loaves Ex, and hydorogen Peroxide radical scavenging ability was the highest in seed Ex. Therefore we could be certain that leaves Ex was the most effective in antioxidative activity from Crotalaria sessiflora L.

• The Korean Journal of Physiology
• /
• v.3 no.2
• /
• pp.9-16
• /
• 1969

It is well known that a number of -SH and -SS containing substances afford a certain measure of protection against radiation effects in many biological systems, and it is conceivable that inherent -SH levels in Ehrlich ascites tumour (ELD)cells may be of decisive improtance with respect to the development of cellular radiation injury. So far, little effort has been directed to elucidate the changes in levels of different -SH and -SS groups in ELD cells when the tumour-bearing whole animal was subjected to the sublethal dose of X-irradiation. The present study was designed to bring some lights in the possible changes of and relationship between various sulfhydryl levels, such as P-SH, NP-SH and NP-SS, as well as the content of protein and cell volume of ELD cells, after subjecting the ELD mice to 1,200 r of X-irradiation. The animals used in this experiment were all mixed bred mice of $20{\sim}25\;gm$ in body weight (approximately 2 months old) irrespective of sex. 12 mice in one experiment were inoculated intraperitoneally with 0.2 ml of ascites tumour cells $(2{\times}10^6\;cells)$, and on the 7th day of the tumour growth, they were X-irradiated with 1,200 r, using the conventional X-ray machine under the following conditions: 200 Kv at 15 mA, 0.5 mm Cu filter, target-skin distance: 50 cm. Radiation dose was measured with the the Philip integrating dosimeter. At 24, 36, 48 and 60 hours after the X-irradiation, the mice were killed by cervical dislocation, and the tumours were taken out. Freshly withdrawn ascites tumours were placed in ice, and immediately the cell concentration was measured with the Coulter Cell Counter (Model B), and the hematocrit of the tumour cells were also determined. Cell volume was thus calculated by the cell concentration and hematocrit value. P-SH content of ELD cells was measured potentiometrically according to the method of Calcutt & Doxey, and NP-SH and NP-SS contents were measured spectrophotometrically by the method described by Ellman. Protein content of ELD cells was determined with the Folin phenol reagent by Lowry et al. Altogether, 48 experimental mice were used, and 12 mice with the only exception of X-irradiation were used as the control. Results obtained indicate that the contents of all the cellular sulfhydryl groups as well as cell volume and protein content of the ELD cells increase significantly as time progresses after the sub-lethal X-ray dose of 1,200 r was given and that all the increase is in a lineal fashion. The regression lines of the relative values, (i. e., taking each control value as 1) of all the values obtained, and the regression lines of cell volume, protein and NP-SH are identical, whereas those of NP-SS and P-SH appear to be widely seperated. However, the difference of those two lines (NP-SS & P-SH) were found to be not significant statistically (p>0.05). Therefore, it can be concluded from the above results that all the values examined increase in a lineal fashion with no statistically significant difference among them. Also, with the radiation dose of 1,200 r, the ELD cell becomes enlarged and swollen progressively up to 60 hours post-irradiation and it becomes more than two times of the original normal size at 60 hours after the irradiation, and up to this stage, it seems apparent that the cell division has been slow due to the X-irradiation applied in this experiment. It is well understandable that the contents of NP-SH, NP-SS, P-SH and protein of the ELD cells increase in parallel with the increase of the cell volume by the X-ray does used, but it also seems interesting to note that all the cellular substances tested show no appreciable difference in the pattern of increase.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2000.04a
• /
• pp.9-10
• /
• 2000

An important business-field of world-wide steel-industry is the coating of thin metal-sheets with zinc, zinc-aluminum and aluminum based materials. These products mostly go into automotive industry. in particular for the car-body. into building and construction industry as well as household appliances. Due to mass-production, the processing is done in large continuously operating plants where the mostly cold-rolled metal-strip as the substrate is handled in coils up to 40 tons unwind before and rolled up again after passing the processing plant which includes cleaning, annealing, hot-dip galvanizing / aluminizing and chemical treatment. In the liquid Zn, Zn-AI, AI-Zn and AI-Si bathes a combined action of corrosion and wear under high temperature and high stress onto the transfer components (rolls) accounts for major economic losses. Most critical here are the bearing systems of these rolls operating in the liquid system. Rolls in liquid system can not be avoided as they are needed to transfer the steel-strip into and out of the crucible. Since several years, ceramic roller bearings are tested here [1.2], however, in particular due to uncontrollable Slag-impurities within the hot bath [3], slide bearings are still expected to be of a higher potential [4]. The today's state of the art is the application of slide bearings based on Stellite\ulcorneragainst Stellite which is in general a 50-60 wt% Co-matrix with incorporated Cr- and W-carbides and other composites. Indeed Stellite is used as the bearing-material as of it's chemical properties (does not go into solution), the physical properties in particular with poor lubricating properties are not satisfying at all. To increase the Sliding behavior in the bearing system, about 0.15-0.2 wt% of lead has been added into the hot-bath in the past. Due to environmental regulations. this had to be reduced dramatically_ This together with the heavily increasing production rates expressed by increased velocity of the substrate-steel-band up to 200 m/min and increased tractate power up to 10 tons in modern plants. leads to life times of the bearings of a few up to several days only. To improve this situation. the Mechanical Alloying (MA) TeChnique [5.6.7.8] is used to prOduce advanced Stellite-based bearing materials. A lubricating phase is introduced into Stellite-powder-material by MA, the composite-powder-particles are coated by High Energy Milling (HEM) in order to produce bearing-bushes of approximately 12 kg by Sintering, Liquid Phase Sintering (LPS) and Hot Isostatic Pressing (HIP). The chemical and physical behavior of samples as well as the bearing systems in the hot galvanizing / aluminizing plant are discussed. DependenCies like lubricant material and composite, LPS-binder and composite, particle shape and PM-route with respect to achievable density. (temperature--) shock-reSistibility and corrosive-wear behavior will be described. The materials are characterized by particle size analysis (laser diffraction), scanning electron microscopy and X-ray diffraction. corrosive-wear behavior is determined using a special cylinder-in-bush apparatus (CIBA) as well as field-test in real production condition. Part I of this work describes the initial testing phase where different sample materials are produced, characterized, consolidated and tested in the CIBA under a common AI-Zn-system. The results are discussed and the material-system for the large components to be produced for the field test in real production condition is decided. Outlook: Part II of this work will describe the field test in a hot-dip-galvanizing/aluminizing plant of the mechanically alloyed bearing bushes under aluminum-rich liquid metal. Alter testing, the bushes will be characterized and obtained results with respect to wear. expected lifetime, surface roughness and infiltration will be discussed. Part III of this project will describe a second initial testing phase where the won results of part 1+11 will be transferred to the AI-Si system. Part IV of this project will describe the field test in a hot-dip-aluminizing plant of the mechanically alloyed bearing bushes under aluminum liquid metal. After testing. the bushes will be characterized and obtained results with respect to wear. expected lifetime, surface roughness and infiltration will be discussed.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.12
• /
• pp.77-87
• /
• 1972

The fruiting phase of rape under transplanting and direct-sowing conditions has been studied at Mokpo during the 2 years period from 1970 to 1971. Two varieties, Yudal and Miyuki were used in this study. The planting space and sowing time were also incorporated into this study. The results could be summarized as follows: 1. The plant tape of rape was nearly umbrella-shaped of all, but has changed to the laid elliptical-shaped, broadly ovate and spindle-shaped under different varieties and cultural conditions in the plant diagram(Fig. 2). 2. The length of the primary branches for each nodes had a tendency to the symmetric apical curve with the apex at the upper 10-12th node in the transplanting. but to the upper bias apical curve with the apex at the upper 5-7th node in the dense-sowing(Fig.3). 3. The ear of main stem was longer, more pods, heavier 1, 000 grains and more grain yield than ear of primary branches of all, Especially, as for that, the rate of yield constitution per plant in the direct-sowing was higher than in the transplanting(Fig. 4, 5, 6, 7, 8, 9). 4. The ear-length of the primary branches for each nodes had a tendency to the relatively slowly apical curve with the apex at the upper 3-4th node in the transplanting, but to the lower bias apical curve with the apex at the upper 2nd node in the dense-sowing. Especially, the possibility of growth at the lower ears was few in the early variety (Fig. 4). 5. The number of pod per ear on the primary branches for each nodes had a .tendency to the curve of ear-length with the apex at the upper 5-8thnode in the transplanting and at the upper 4-5th node in the dense-sowing (Fig. 5). Accordingly, a high positive correlation was found between the ear-length and number of pod per ear (Table 2) 6. In the transplanting, the high rate of effective ear was from the upper nods to the 12th node, but below the 16-17th nodes was ineffective. However, in the early dense-sowing the high rate of effective was to the 7th node. but below the 10th nodes was. ineffective. Especially, in the early variety has difficult to secure of poi-numbers for ineffective of the lower nodes(Fig. 6.). 7. The density of pod setting of the ear of main stem was the longest of all ears, and the lower nods were, the shorter it became. That had a tendency to the evidently apical growth. However. in the early variety, it was lengthened according to growth of ear-length(Fig.7). 8. The pod-length of the medium nodes was longer than the upper and lower, and the possitive correlation between pod-length and number of grain per poi was very high(Table 2.). 9. In the grain yield per node of primary branches, the most yielding node of transplanting was the upper 9th node, of dense-sowing 4-5th node(Fig 8.), and the possitive correlation between grain yield per node and ear-length or number of pod per ear was very high(Table 2). 10. The grain yield of ear of main stem was higher than that of primary branches in the percentage of dependence for grain yield per plant. The limint node of 50% of dependence to cumulative grain yield per plant was the upper 7-8th node in tranplanting, in the early dense-sowing 4-5th node, and in tke late dense-sowing-3th node(Fig. 9). 11. In the weight of 1, 000 grains the lower nodes were, the lighter it becames in dense-sowing. Therefore, this was also lighter than in the transplanting to the (Fig. 10.). 12. The oil content of grain at the medium nodes was low in the early variety, but at the ear of main stem and upper 1st node it was extremely high(Fig. 11.).

• Journal of Korean Society of Environmental Engineers
• /
• v.30 no.12
• /
• pp.1287-1293
• /
• 2008

In this study, a blend of 2-amino-2-methyl-1-propanol (AMP) and ammonia (NH$_3$) was used to achieve high absorption rates for carbon dioxide (CO$_2$) as suggested at several literatures. The absorption rates of aqueous AMP and blended AMP+NH$_3$ solutions with CO$_2$ and nitrogen dioxide (NO$_2$) were measured using a stirred-cell reactor at 303 K. The effect of the added NH$_3$ to enhance absorption characteristics of AMP was studied. The performances were evaluated under various operating conditions. The absorption rates increased following the increase of the concentration of NH$_3$. The absorption rate of NH$_3$ blended into 30 wt.% AMP solution with NO$_2$ at 303 K was 12.6$\sim$32.6% higher than that of aqueous AMP solution without NH3. Also, the addition of 3 wt.% NH$_3$ to 30 wt.% AMP increased 48.2$\sim$41.6% values for the reactions with CO$_2$ and NO$_2$ at 303 K. Therefore, it clearly shows that the reaction rate of AMP with CO$_2$ and NO$_2$ can be increased by the addition of NH$_3$.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.57 no.2
• /
• pp.160-165
• /
• 2012

A field study was conducted at Miryang in 2011 to evaluate differential sensitivity of six rice cultivars, three Indica${\times}$Japonica rice (long grain, cv. Hanareumbyeo, Hanareum2, Dasanbyeo) and three Japonica rice (short grain, Nampyung, Ilpumbyeo and Junamjosaeng) cultivars, to benzobicyclon, mesotrione+pretilachlor (MP) and butachlor (control) in transplanting rice and their treatment influences on rice yield. All Indica${\times}$Japonica rice cultivars exhibited susceptible to both benzobicyclon and MP as reflected by higher visual injury and carotenoid biosynthesis inhibition when compared with Japonica rice cutlivars. The percentage of foliar chlorosis of Indica${\times}$Japonica rice was only 0.9~4.7% for benzobicyclon at 13 days after treatment (DAT) and 30.3~64.4% for MP at 5DAT but it increased rapidly to 88.4~91.2% at 12~20DAT. However, most of the Japonica cultivars are tolerant to bezobicyclon and MP. There was no visible leaf chlorosis but carotenoid biosynthesis was slightly inhibited. Based on relative carotenoid content reduction of benzobicyclon and MP to butachlor, the Indica${\times}$Japonica rice showed 4.6~15.6 fold higher compared with the Japonica rice. The heading date of the injured rice plant was delayed by 3 days and panicle number per square meter and ripened grain ratio were reduced as compared with the control treatment of butachlor. Rice yield of the Indica${\times}$Japonica rice cultivars treated with benzobicyclon and MP was reduced by 7~10%, 3~5%. respectively. The result indicates that rice cultivars vary in tolerance to HPPD-Inhibiting herbicides and Indica${\times}$Japonica rices were more susceptible than the Japonica rices to MP and benzobicyclon. Rice yield of the Indica${\times}$Japonica rices was also significantly reduced by the those herbicide treatments.

• Journal of Animal Science and Technology
• /
• v.49 no.6
• /
• pp.819-828
• /
• 2007

Two experiments were conducted to observe the effects of direct fed microbials on metabolic characteristics in sheep and milking performance in dairy cows. A metabolic trial with four ruminally cannulated sheep(60±6kg) was conducted in a 4×4 Latin square design to investigate the supplementation effects of Saccharomyces cerevisiae, Clostridium butyricum or mixed microbes of S. cerevisiae and C. butyricum on ruminal fermentation characteristics and whole tract digestibility. Sheep were fed 1.25 kg of total mixed ration(TMR, DM basis) supplemented with S. cerevisiae (2.5g/day), C. butyricum (1.0g/day) or its mixture(S. cerevisiae 1.25g/day+C. butyricum 1g/day), twice daily in an equal volume. But control sheep were fed only TMR. A feeding trial with 28 lactating Holstein cattle was also conducted for 12 weeks to investigate the effects of the same microbial supplements as for the metabolic trial on milking performance. The cows were fed the TMR(control), and fed S. cerevisiae(50g/day), C. butyricum(15g/day) or its mixture (S. cerevisiae 25g/day + C. butyricum 7.5g/day) with upper layer dressing method. Total VFA concentration and the digestibility of whole digestive tract in the sheep increased by supplementation of S. cerevisiae, C. butyricum or their combined microbials compare to control group. The proportion of propionic acid at 1h(P<0.039) and 3h(P<0.022) decreased by supplementation of S. cerevisiae while tended to increase acetic acid proportion at the same times. Daily dry matter intake(DMI) was not influenced by the microbial treatments, but milk yield(P<0.031) and feed efficiency(milk yield/DMI, P<0.043) were higher for the cow received C. butyricum than those for other treatments. The milk fat content was higher (P<0.085) when cows fed S. cerevisiae(4.11%) than that fed the control (4.08%), the diets with C. butyricum (3.85%) and the microbial mixture. Based on the results obtained from the current experiments, supplementation of C. butyricum or mixture with S. cerevisiae might be increased milk fat content and milk productivity of lactating daily cows. (Key words:Saccharomyces cerevisiae, Clostridium butyricum, Fermentation characteristics,