• Nuclear Engineering and Technology
• /
• v.16 no.2
• /
• pp.58-63
• /
• 1984

Paper electrophoretic separation of octahedrally bonded (Ruc $l_{6}$ )$^{3-}$ has been carried out by using the specially designed migration apparatus. The supporting electrolyte solutions are as follows: 0.1M-HCl $O_4$, 0.05 M-HCl+0.09M-KCl, 0.1M-HCl, 5$\times$10$^{-3}$ M-NTA, 0.01M-HCl, 0.01M-HCl $O_4$, 0.01M-citric acid, 0.01M-K $H_2$P $O_4$+0.01M-N $a_2$HP $O_4$, 0.05M-borax, 0.025M-N $a_2$C $O_3$+0.025M-NaHC $O_3$, 0.01M-N $a_3$P $O_4$, 0.01M-NaOH and 0.1 M-NaOH. The (Ruc $l_{6}$ )$^{3-}$ appears in 2 to 4 peaks and is found in several chemical species such as (RuCl ($H_2O$)$_{5}$ )$^{2+}$, cis and trans (RuC $l_2$($H_2O$)$_4$)$^{1+}$, (RuC $l_3$($H_2O$)$_3$)$^{0}$ , (RuC $l_4$($H_2O$)$_2$)$^{1-}$, (RuC $l_{5}$ ($H_2O$))$^{2-}$ and (RuC $l_{6}$ )$^{3-}$. The retention value has been found to be highest in the 0.025M-N $a_2$C $O_3$+0.025M-NaHC $O_3$ electrolyte solution.n.

• Korean Journal of Materials Research
• /
• v.10 no.7
• /
• pp.489-492
• /
• 2000

Three different white cast irons alloyed with Cr and Si were prepared in order to study their distribution be-havior in matrices and carbides. The specimens were produced using a 15kg-capacity high frequency induction fur-nace. Melts were super-heated to $1600^{\circ}C$, and poured at $1550^{\circ}C$ into a pepset mold. Three combinations of the alloys were selected so as to observe the distribution behavior of Cr and Si : 0.5%C-25.0%Cr-1.0%Si(alloy No. 1), 0.5%C-5.0%Cr-1.0%Si(alloy No. 2) and 2.0%C-5.0%Cr-1.0%Si(alloy No. 3). Cellular $M_7C_3$ carbides-$\delta$ferrite eutectic were developed at $\delta$ferrite liquid interfaces in the alloy No. 1 while only traces of $M_7C_3$ carbides-$\delta$ferrite eutectic were precipitated in the alloy No. 2. With the addition of 2.0% C and 5.0% Cr, ledeburitic $M_3C$ carbides instead of cellular $M_7C_3$ carbides were precipitated in the alloy No. 3. Cr was distributed preferentially to the $M_7C_3$ carbides rather than to the matrix structure while more Si was partitioned in the matrix structure rather than the $M_7C_3$ carbides. $K^m$ for Cr was ranged from 0.56 to 0.68 while that for Si was from 1.12 to 1.28. $K^m$ for Cr had a lower value with increased carbon contents. The mass percent of Cr was higher in the $M_7C_3$ carbides with increased Cr contents.

• The Journal of Korean Society for Radiation Therapy
• /
• v.28 no.1
• /
• pp.57-64
• /
• 2016

Purpose : To evaluate the results of absorbed and effective doses using CBCT and 4D-CBCT settings for lung cancer. Materials and Methods : This experimental study. Measurements were performed using a Anderson rando phantom with OSLD(optically stimulated luminescent dosimeters). It was performed computed tomography(Lightspeed GE, USA) in order to express the major organs of the human body. Measurements were obtained a mean value is repeated three times each. Evaluations of effective dose and absorbed dose were performed the CL-IX-Thorax mode and Truebeam-Thorax mode CBCT. Additionally, compared Truebeam-Thorax mode CBCT with Truebeam-Thorax mode 4D-CBCT(Four-dimensional Cone Beam Computed Tomography) Results : Average absorbed dose in the CBCT of CL-IX was measured in lung 2.505cGy, heart 2.595cGy, liver 2.145cGy, stomach 1.934cGy, skin 2.233cGy, in case of Truebeam, It was measured lung 1.725cGy, heart 2.034cGy, liver 1.616cGy, stomach 1.470cGy, skin 1.445cGy. In case of 4D-CBCT, It was measured lung 3.849cGy, heart 4.578cGy, liver 3.497cGy, stomach 3.179cGy, skin 3.319cGy Average effective dose, considered tissue weighting and radiation weighting, in the CBCT of CL-IX was measured lung 2.164mSv, heart 2.241mSVv, liver 0.136mSv, stomach 1.668mSv, skin 0.009mSv, in case of Turebeam, it was measured lung 1.725mSv, heart 1.757mSv, liver 0.102mSv, stomach 1.270mSv, skin 0.005mSv, In case of 4D-CBCT, It was measured lung 3.326mSv, heart 3.952mSv, liver 0.223mSv, stomach 2.747mSv, skin 0.013mSv Conclusion : As a result, absorbed dose and effective Dose in the CL-IX than Truebeam was higher about 1.3 times and in the 4D-CBCT Truebeam than CBCT of Truebeam was higher about 2.2times However, a large movement of the patient and respiratory gated radiotherapy may be more accurate treatment in 4D-CBCT. Therefore, it will be appropriate to selectively used.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.8 no.1
• /
• pp.77-88
• /
• 1981

The purpose of this study was to make a comprehensive study & evaluation of the oral status of mental retarded children. The auther examined intraorally 486 (male; 311, female;175) mental retarded children. The result was as follows; (General mental retarded children means the children who live in their parent's home, & orphan mental retarded children means the children who live in orphanage.) 1. The dft rate was 31.6% in general mental retarded children (G.m.r.c.) & 20.7% in orphan mental retarded children (O. m. r. c.). The dft index was 3.73 in G.m.r.c. & 2.15 in O.m.r.c. 2. The DMFT rate was 24.6% in female G.m.r.c., 16.7% in male G.m.r.c., 12.7% in female O.m.r.c., 8.4% in male O.m.r.c. The DMFT index was 4.94 in female G.m.r.c., 4.01 in male G.m.r.c., 1.40 in male O.m.r.c., 2.75 in female O.m.r.c. 3. The malocclusion prevalence was 57.3%. the class I malocclusion was 14.2% Class II malocclusion 19.3%, Class III malocclusion 23.5%. The children with Down's syndrome had 60.0% of class III malocclusion prevalence. 4. The dental calculus index was 1.97 in male O.m.r.c., 1.81 in female O.m.r.c., 1.30 in male G.m.r.e., 1.13 in female G.m.r.c. 5. The dental plaque index was 3.06 in female G.m.r.c., 3.00 in male Gm.r.e. 2.70 in male O.m.r,c., 2.32 in female O.m.r.c.

• Korean Journal of Materials Research
• /
• v.11 no.6
• /
• pp.472-476
• /
• 2001

Type and three-dimensional morphology of carbides precipitated in the X(X= 1.70, 1.92, 2.21, 2.50, 2.86)%C-5%Cr-5%V-5%Mo-5%W-5%Co multi-component white cast iron were investigated using an optical microscope and SEM. The types of carbides precipitated were MC, M$_2$C and M$_{7}$C$_{3}$. Morphology of the MC carbide took three forms, that it petal-like, nodular and coral-like. MC carbide seemed to change its morphology from petal-like through nodular, and finally to coral-like with an increase in carbon content. M7C carbide was classified into lamellar and plate-like type. The lamellar M$_2$C arbide precipitated in the iron with low molybdenum and tungsten contents, and higher contents of both elements in the iron were needed to form the plate-like M$_2$C carbide. The morphology of M$_{7}$C$_{3}$ was rod-like similar to that observed in high chromium white cast iron. However, cobalt does not affect the type and morphology of precipitated carbides.des.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.06a
• /
• pp.18-19
• /
• 2008

Polycrystalline(poly) 3C-SiC film is a promising structural material for M/NEMS used in harsh environments, bio and fields. In order to realize poly 3C-SiC based M/NEMS devices, the electrical properties of poly 3C-SiC film have to be optimized. The n-type poly 3C-SiC thin film is deposited by APCVD using HMDS$(Si_2(CH_3)_6)$ as single precursor and are in-situ doped using N2. Resistivity values as low as 0.014 $\Omega$cm were achieved. The carrier concentration increased with doping from $3.0819\times10^{17}$ to $2.2994\times10^{19}cm^{-3}$ and electronicmobility increased from 2.433 to 29.299 $cm^2/V{\cdot}s$.

• Journal of Korean Society of Environmental Engineers
• /
• v.38 no.6
• /
• pp.317-322
• /
• 2016

While PFOS sodium salt ($C_8F_{17}SO_3Na$) was not degraded by microorganisms for 28 days, the 4 alternatives were biodegraded at the rates of 21.6% for $C_{25}F_{17}H_{32}S_3O_{13}Na_3$, 20.5% for $C_{15}F_9H_{21}S_2O_8Na_2$, 15.8% for $C_{23}F_{18}H_{28}S_2O_8Na_2$ and 6.4% for $C_{17}F_9H_{25}S_2O_8Na_2$, respectively. The acute toxicity test using Daphnia magna was conducted for 48 hours, the half effective concentration ($EC_{50}$) of PFOS sodium salt ($C_8F_{17}SO_3Na$) was evaluated in 54.5 mg/L. While the 4 alternatives did not show any effect at 500.0 mg/L. The surface tension of the PFOS salt ($C_8F_{17}SO_3Na$) is 46.2 mN/m at a concentration of 500.0 mg/L. While the surface tension of the 4 alternatives was found to be superior to PFOS sodium salt ($C_8F_{17}SO_3Na$). The surface tension of $C_{23}F_{18}H_{28}S_2O_8Na_2$ (20.9 mN/m) has the lowest, followed by $C_{15}F_9H_{21}S_2O_8Na_2$ (23.4 mN/m), $C_{17}F_9H_{25}S_2O_8Na_2$ (27.3 mN/m), $C_{25}F_{17}H_{32}S_3O_{13}Na_3$ (28.2 mN/m). The four kinds of alternatives ($C_{15}F_9H_{21}S_2O_8Na_2$, $C_{17}F_9H_{25}S_2O_8Na_2$, $C_{23}F_{18}H_{28}S_2O_8Na_2$, $C_{25}F_{17}H_{32}S_3O_{13}Na_3$) were found to be superior to PFOS sodium salt ($C_8F_{17}SO_3Na$) in terms of biodegradation, Daphnia sp. acute toxicity and surface tension, and thus they were considered applicable as PFOS alternatives. Especially biodegradation rate of $C_{15}F_9H_{21}S_2O_8Na_2$, $C_{23}F_{18}H_{28}S_2O_8Na_2$ and $C_{25}F_{17}H_{32}S_3O_{13}Na_3$ was relatively high as 15.8~21.6%, and Daphnia sp. acute toxicity and surface tension were considerably superior (surface tension 39~55%) to PFOS sodium salt. Therefore, these alternatives are considered to be available as an alternative of PFOS.

• Journal of the Korean Ceramic Society
• /
• v.40 no.1
• /
• pp.24-30
• /
• 2003

A formation and conversion of AFm phases decisively play role in the hydration, hardening and corrosion processes of various cement. In this study, the conversion of Alumino-Ferrite Monohydrates(AFm) phases under the addition of $CaCO_3,;CaCl_2;and;CaSO_4{cdot}2H_2O$was investigated by the XRD quantitative analysis. The thypical AFm phases are $M_S(monosulfoaluminate),;M_C(monocarboaluminate);and;M_{Cl}(monochloroaluminate and also Called Friedel's salts)$in this cementitious system, The conversion reaction were not occurred in $M_C-CaCO_3,;M_{Cl}-CaCO_3$ and $M_{Cl}-CaCl_2$system. However, in $M_S-CaCO_3$ system, ettringite and $monocarboaluminate(M_C)$ were formed. In $M_S-CaCl_2;system;M_S$ was transformed to Friedel's $salts(M_{Cl})$ and ettringite was formed. In the case of $CaSO_4{cdot}2H_2O$ addition, all AFm $phases(M_S,;M_C;and;M_{Cl})$ were transformed to ettringite. The order of stabilization of AFm phases under $CaCO_3,;CaCl_2;and;CaSO_4{cdot}2H_2O$ was as follows : $M_S< M_C

• Korean Journal of Animal Reproduction
• /
• v.15 no.2
• /
• pp.133-139
• /
• 1991

This stduy was carried out in order to investigate the effects of concentration and equilibration time of cryoprotective agents on survival rate of slow and ultrarapidly frozen in vitro fertilized bovine embryos. In vitro fertilized bovine embryos, following dehydration by cryoprotective agents and sucrose, were slowly freezed(from 2$0^{\circ}C$ to -7$^{\circ}C$/-1$^{\circ}C$/min., from -7$^{\circ}C$ -35$^{\circ}C$/-0.2$^{\circ}C$/min. from -35$^{\circ}C$ to -38$^{\circ}C$/-0.3$^{\circ}C$/min.) by cell freezer and directly plunged into liquid nitrogen and thawed in 38$^{\circ}C$ water. Survival rate was defined by development rate to the morula and blastocyst stage after in vitro cultured and FDA test. The results are summarized as follows : 1. The survival rates of in vitro fertilized bovine embryos after slow frozen-thawing in the freezing medium of 0.25M sucrose added 2.5M glycerol, 3.0M DMSO, 2.0M propanediol and 2.5M glycerol＋2.0M propanediol were 84.3%, 85.9%, 77.8%, 74.3%, respectively. 2. The survival rates of in vitro fertilized bovine embryos after slow frozen-thawing in the freezing of 0.50M sucrose added 2.5M glycerol, 3.0M DMSO, 2.0M propanediol and 2.5M glycerol＋2.0M propanediol were 83.8%, 85.1%, 71.4%, 74.6%, respectively. 3. The survival rates of in vitro fertilized bovine embryos after ultrarapid frozen-thawing in the freezing of 0.25M sucrose added 2.5M glycerol, 3.0M DMSO, 2.0M propanediol and 2.5M glycerol＋3.0M propanediol were 69.3%, 70.8%, 63.2%, 67.1%, respectively. 4. The survival rates of in vitro fertilized bovine embryos after ultrarapid frozen-thawing in the freezing of 0.25M sucrose added 2.5M glycerol, 3.0M DMSO, 2.0M propanediol and 2.5M glycerol＋2.0M propanediol were 69.4%, 70.1%, 62.3%, 63.5%, respectively. 5. The survival rates of in vitro fertilized bovine embryos after slow and ultrarapid fromthawing in the freezing medium of sucrose added cryoprotective agents were not significant difference between 5min. and 10min. of equilibration time.

• Korean Journal of Microbiology
• /
• v.29 no.6
• /
• pp.408-415
• /
• 1991

TOL plsmid size of Flavobacterium odoratum SUB53 was estimated as 83 Md and the optimum concentration of m-toluate degradation by TOL plasmid was 5 mM. $H_{2}$ production by Rhodopseudomonas sphaeroides KCTC1425 was largely dependent on nitrogenase activity and showed the highest at 30 mM malate with 7 mM glutamate as nitrogen source. Nitrogenase activities were inhibited by 0.3 mM $NH_{4}^{+}$ions, to be appeared the decrease of $H_{2}$ production. Conjugation of TOL plasmids from F. odoratum SUB53 and Pseudomonas putida mt-2 to R. sphaeroides showed the optimum at the exponential stage of recipient cells in presence of helper plasmid pRK2013. According to the investigation of catechol-1,2-oxygenase (C-1, 2-O) and catechol-2,3-oxygenase (C-2,3-O) activities of R. sphaeroides C1 (TOL SUB53) and C2 (TOL mt-2), the gene for C-2,3-O is located on TOL plasmid and gene for C-1, 2-O on the chromosome of R. sphaeroides. m-Toluate was biodegraded by TOL plasmid in R. sphaeroides C1 and C2, presumably to be produced $H_{2}$ gas from the secondary metabolites of m-toluate.e.