• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.67 no.2
• /
• pp.301-307
• /
• 2018

Unmanned Aerial Vehicles (i.e., drone) are gaining a lot of interest from a wide range of application domains such as infrastructure monitoring and parcel delivery service. In those service scenarios, multiple UAVs are involved and should be reliably operated by so-called UAV management system. For that, we propose oneM2M standard based UAV management and control system which is specifically targeted at traffic management of low-altitude UAVs. In this paper, we include oneM2M platform architecture and its implementation for UAV management system in conjunction with UAV interworking procedure.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.18 no.2
• /
• pp.169-177
• /
• 2020

Here, the stability of stainless steel 316 (SS-316) was investigated to identify its applicability in the oxide reduction process, as a component in related equipment, to produce a complicated gas mixture composed of O₂ and Cl₂ under an argon (Ar) atmosphere. The effects of the mixed gas composition were investigated at flow rates of 30 mL/min O₂, 20 mL/min O₂ + 10 mL/min Cl₂, 10 mL/min O₂ + 20 mL/min Cl₂, and 30 mL/min Cl₂, each at 600℃, during a constant argon flow rate of 170 mL/min. It was found that the corrosion of SS-316 by the chlorine gas was suppressed by the presence of oxygen, while the reaction proceeded linearly with the reaction time regardless of gas composition. Surface observation results revealed an uneven surface with circular pits in the samples that were fed mixed gases. Thermodynamic calculations proposed the combination of Fe and Ni chlorination reactions as an explanation for this pit formation phenomenon. An exponential increase in the corrosion rate was observed with an increase in the reaction temperature in a range of 300 ~ 600℃ under a flow of 30 mL/min Cl₂ + 170 mL/min Ar.

• KIEAE Journal
• /
• v.12 no.2
• /
• pp.83-92
• /
• 2012

Recently, many countries are tightening a variety of policies and controls with great efforts to reduce emission of GHGs(Greenhouse Gases) as concern for climate change heightens. The purpose of the study is to provide guidelines for planning and evaluate element and evaluate housing development. The elements are also assorted into 6 sections and 30 planning elements were drawn from them. It is drawn to 6 sections, 27 categories, 31 evaluation elements except cultural and perceptual aspects unrelated to planning elements from these elements. Case analysis has shown that most of planning elements were applied because these cases obtained environment-friendly certification in the country. Followings are the common characteristics. Firstly, it showed that application of planning element in all cases is excellent. Secondly, the case with excellent application of elements related with energy and application degree obtained excellent degree i environment-friendly certification in the country. Finally, application of planning elements related with renewable energy was in poor condition in all cases. With the utilization of SBTool, the evaluation results about planning elements of housing complex of Carbon emissions-reduction type showed that CASE-A obtained 11.17 points and CASE-B obtained 9.24 points. In the case of renewable energy section, it was confirmed that the evaluation doesn't work well. As a result, changes of planning elements affect environment-friendly extent. It was confirmed that accessibility to housing complex of Carbon emissions-reduction type could change. Estimated result of Amount of Carbon emission showed that annual energy consumption per each family of CASE-A is $4,269,964MJ/m^2$, as a result of which, Carbon emission is $234,815kg/m^2$. And annual energy consumption per family of CASE-B is $4,197,563MJ/m^2$, as a result of which, Carbon emission is $214,584kg/m^2$. Application of planning elements in the aspect of housing complex of Carbon emissions-reduction type shows that the level for Carbon emissions-reduction is high level. And study with assessment from the draft should be followed.

• Journal of Biosystems Engineering
• /
• v.22 no.2
• /
• pp.127-136
• /
• 1997

This study was accomplished to develop a pneumatic granular applicator that can be attached to the conventional ride-on rice transplanter. Operating conditions of a metering device for the applicator were determined so as to obtain the required discharge rate of granules for field application. The shape and size of diffuser was selected for the applicator and the spacing between diffusers on a boom and the boom height were determined as an optimal application condition for uniform distribution. The diffuser spacing of 1m for the fertilizer and the diffuser spacing of 0.8m for the pesticide at the boom height over 0.8m were acceptable.

• Journal of Biosystems Engineering
• /
• v.35 no.4
• /
• pp.215-223
• /
• 2010

In order to develop an precision aerial pesticide application system to be attached to an unmanned helicopter which can be applied to small lots of land, this study analyzed the flowing and spraying characteristics of the spray droplets by the main rotor downwash by setting the application conditions at the flight altitude of 3 m, the diameter of main rotor of 3.1 m, the boom length of around 2.8 m, and the spraying rate of 8 L/ha. The results of this study are summarized below. Through analysis of the covering area ratio of the spray droplets by main rotor downwash by nozzle type, boom with tilt angle and height, it was found that the covering area ratio of the twin flat-fan nozzle of around 25% was more uniform than other types of nozzle, also boom with $10^{\circ}$ tilt angle and spraying height of 3 m was shown to be the appropriate conditions for aerial application of pesticides. It was found that the nozzle position to minimize the scattering loss of spray droplets due to vortex phenomenon at both ends of the main rotor was around 10 cm from the end of the main rotor. An application test for the aerial pesticide application system attached to the HUA-ACEI unmanned helicopter developed by the Rural Development Administration showed that the range of covering area ratio of the spray droplets was 10-25%, and the spraying width was approximately 7 m when over 10% of covering area ratio was considered for valid spraying.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.47 no.4
• /
• pp.281-287
• /
• 2021

In this study, we analyzed the cosmetic applicability of extract from snow tea, native to Lijiang, Yunnan-province, China. After confirming the species as N. grossedentata through DNA analysis of Lijiang snow tea, experiments were conducted using representative tea, green tea, and a representative control group for each efficacy analysis. Both teas were extracted using 70% (v/v) ethanol aqueous solution. The polyphenol content in the Lijiang snow tea extract (gallic acid equivalent, 23.9 ± 3.2 mg/mL) was higher than that in green tea extract (16.4 ± 2.3 mg/mL). In contrast, the antioxidant (Radical scavenging, IC₅₀ 104 ㎍/mL), tyrosinase enzyme inhibitory (whitening agent, IC₅₀ 40.7 ㎍/mL), and Escherichia coli growth inhibitory (preservative) activities (IC₅₀ 2.85 mg/mL) were analyzed based on the solid content in the extract, and it was confirmed that the activities of Lijiang snow tea extract were superior to those of green tea extract (radical scavenging, IC₅₀ 234 ㎍/mL. It also showed similar efficacy to previously used active substances such as antioxidants (vitamin C, IC₅₀ 108 ㎍/mL), whitening agents (vitamin C, IC₅₀ 80㎍/mL), and preservatives (methylparaben, IC₅₀ 4.35 mg/mL). However, green tea was found to be better in collagenase inhibition activity (anti-wrinkle). Through this study, the cosmetic application potential of Lijiang snow tea is high.

• Mycobiology
• /
• v.44 no.3
• /
• pp.180-186
• /
• 2016

Trichoderma species are able to persist on living sapwood and leaves of cacao (Theobroma cacao) in an endophytic relationship. In this research, we evaluated the ability of Trichodema asperellum introduced at the incision site in the bark for side grafting with the concentration of 4 g/10 mL, 4 g/100 mL, and 4 g/1,000 mL (suspended in water) in suppressing vascular streak dieback (VSD) incidence and promoting growth of side grafts in the field. The incidence of VSD in two local clones of cacao, MCC1 and M04, without application of T. asperellum was 71.2% and 70.1% at 21 wk after grafting, respectively. However, when the two clones were treated with a concentration of 4 g/10 mL T. asperellum, the incidence was 20.6% and 21.7%, respectively, compared to 29.1% and 20.9% at 4 g/100 mL and 18.2% and 15.6% at 4 g/1,000 mL. By comparing to the control, the treatment with the same concentrations of T. asperellum listed above, the total number of stomata in MCC1 decreased by 41.9%, 30.2%, and 14.0% and in M04 by 30.5%, 21.9%, and -2.5% (exception), respectively. Otherwise, the total area of stomata opening increased by 91.4%, 99.7%, and 28.6% in MCC1 and by 203.8%, 253.5%, and 35.9% in M04, respectively. Furthermore, the number of buds and branches treated with a mixture concentration on the the two clones increased by 90.7% and 21.7%, respectively. These data showed that the application of T. asperellum to cacao scions while grafting can decrease VSD incidence in side grafts and increase growth of grafts in addition to decreasing total number of stomata, increasing total area of opened stomata, and increasing number of buds and branches.

• Journal of Genetic Medicine
• /
• v.19 no.1
• /
• pp.7-13
• /
• 2022

Purpose: Preimplantation genetic testing for monogenic disorders (PGT-M) has been successfully used to prevent couples with monogenic disorders from passing them on to their child. Charcot-Marie-Tooth Disease (CMT) is a genetic disorder characterized by progressive extremity muscle degeneration and loss of sensory function. For the first time in Korea, we report our experience of applying single nucleotide polymorphism genotyping and karyomapping for PGT-M of CMT disease. Materials and Methods: Prior to clinical PGT-M, preclinical tests were performed using genotypes of affected families to identify informative single-nucleotide polymorphisms associated with mutant alleles. We performed five cycles of in vitro fertilization PGT-M in four couples with CMT1A, CMT2A, and CMT2S in CHA Fertility Center, Seoul Station. Results: From July 2020 through August 2021, five cycles of PGT-M with karyomapping in four cases with CMT1 and CMT2 were analyzed retrospectively. A total of 17 blastocysts were biopsied and 15 embryos were successfully diagnosed (88.2%). Ten out of 15 embryos were diagnosed as unaffected (66.7%). Five cycles of PGT-M resulted in four transfer cycles, in which four embryos were transferred. Three clinical pregnancies were achieved (75%) and the prenatal diagnosis by amniocentesis for all three women confirmed PGT-M of karyomapping. One woman delivered a healthy baby uneventfully and two pregnancies are currently ongoing. Conclusion: This is the first report in Korea on the application of karyomapping in PGT-M for CMT patients. This study shows that karyomapping is an efficient, reliable and accurate diagnostic method for PGT-M in various types of CMT diseases.

• Asia-pacific Journal of Multimedia Services Convergent with Art, Humanities, and Sociology
• /
• v.6 no.2
• /
• pp.81-88
• /
• 2016

Machine-to-Machine (M2M) communication provides each component (machine) with access to Internet, evolving into the IoT technology. IoT is a trend where numbers of devices provide the communication service, using the Internet protocol. As spreading the concept of IoT(Internet of Things), various objects become home information sources. According to the wide spread of various devices, it is difficult to access data on the devices with unified manners. Under this environment, security is a critical element to create various types of application and service. In this paper propose the inter-device authentication and Centralized Remote Security Provisioning framework in Open M2M environment. The results of previous studies in this task is carried out by protecting it with the latest information on M2M / IoT and designed to provide the ultimate goal of future M2M / IoT optimized platform that can be integrated M2M / IoT service security and security model presents the information.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.47 no.2
• /
• pp.3-12
• /
• 2005

The objective of this study is securement of upland irrigation water using storage level management of small dams. However, it is not new development of water resources but securement of water using storage level management of existing dam. This study has enhanced the water utilization coefficient of dam, after extra available water had been calculated by application of periodical management storage level and this water is used to other water like the upland irrigation water demand. As the result of application, it can secure extra available water except the water requirement. Minimum extra available water except flood is about $20,000,000\;m^3$ and crop irrigation water demand of 10yr frequency is about $2,033,000\;m^3$ in Seongju. The utilization of crop irrigation water can be possible. And extra available water is about $3,102,000\;m^3$ in 2000, $1,959,000\;m^3$ in 2001 except flood period and crop irrigation water demand of 10yr frequency is about $2,272,000\;m^3$ in Donghwa. It is judged that extra available water cannot be used to crop irrigation water during the dry season in Dongwha. Consequently, when management storage level is determined and more efficient use of water is gotten like this study, water utilization coefficient will be enhanced.