• Korean Journal of Optics and Photonics
• /
• v.11 no.3
• /
• pp.171-178
• /
• 2000

We present a numerical model which enables to analyze $1.47mu$m amplification band characteristics for thulium doped fluoride fiber amplifiers. We focused on upconversion pumping scheme, thus many transitions affecting $1.47mu$m band amplification was considered simultaneously. Backward propagating waves and transverse mode were also considered in the model. The parameters for modeling were then acquired using published experimental data and related theories such as Judd-Ofelt theory for radiative transition, empirical energy gap law for non-radiative transition, and McCumber relations for cross-sections. The simulation showed well-matched results with experiment and internal dynamics. amics.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38C no.8
• /
• pp.706-712
• /
• 2013

In this paper, channel modeling of VLC(Visible Light Communication) was investigated under indirect lightning circumstance which was the way that all phontons started from LED(Light Emitting Diode) were reached on the floor with NLOS paths. I supposed width(6m), depth(4m), height(2.2m) cube room circumstance for VLC communication channel and supposed that 4 LEDs were located at 2m height, which emitted photons at the direction of wall and ceiling. Channel characteristics, which were power attenuation and delayed receiving of light signal, were abstracted from receivers(PDs) which were located at 0.5m above from floor. The availability of channel was verified via BPSK based communication simulation.

• Journal of Korea Water Resources Association
• /
• v.37 no.7
• /
• pp.581-587
• /
• 2004

An experimental watershed was selected and sustainable yield was evaluated. The study area(3.89$\textrm{km}^2$) was located in Kyungpook Sangju Yangchon-dong. The visual MODFLOW was verified by comparing the observed and estimated groundwater table. The analysis of the observed and estimated groundwater table from 19 March 2003 to 18 March 2004 showed that the average error was 0.0009m, the error sum of squares 7.245$m^2$, absolute mean error 0.094 m, root mean square error 0.141m, and the model efficiency was 92%. The normal, 10- and 30- year drought frequency years were selected and sustainable yield was evaluated in these periods. Ratios of sustainable yield to the annual infiltration were 14.5% for the normal year(1992), 15.1% for the 10-year(1994), and 15.2% for the 30-year drought frequency year(1982). The results of this study can be used as a basic information for groundwater development and management planning considering regional characteristics.

• Journal of Korean Society for Atmospheric Environment
• /
• v.34 no.3
• /
• pp.469-485
• /
• 2018

On September 26, 2017, South Korean government has established the Particulate Matter Comprehensive Plan to improve Korean air quality by 2022, which aims to reduce annual mean surface $PM_{2.5}$ concentration to $18{\mu}g/m^3$. This study demonstrates quantitative assessment of predicted $PM_{2.5}$ concentrations over 17 South Korean regions with the enforcement of the comprehensive plan. We utilize the Community Multi-scale Air Quality (CMAQ) modeling system with CAPSS 2013 and CREATE 2015 emissions inventories. Simulations are conducted for 2015 with the base emissions and the planned emissions, and impacts from model biases are minimized using the RRF (Relative Response Factor). With effective emission reduction scenario suggested by the comprehensive plan, the model demonstrates that the surface $PM_{2.5}$ concentration may decrease by $6{\mu}g/m^3$ ($23{\mu}g/m^3{\rightarrow}17{\mu}g/m^3$) and $7{\mu}g/m^3$ ($25{\mu}g/m^3{\rightarrow}18{\mu}g/m^3$) for Seoul and South Korea, respectively. The number of high $PM_{2.5}$ days(daily mean>$25{\mu}g/m^3$) also decreases from 21 days to 4 days.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.37 no.2
• /
• pp.129-136
• /
• 2004

Visual line-transect surveys for the finless porpoise (Neophocaena phocaenoides) were conducted in the offshore of the west coast of Korea (WCOK) from 18 April to 17 May 2001 $(34^{\circ}18'\;to\;37^{\circ}18'N,\;123^{\circ}00'\;to\;126^{\circ}00'E),$ and in the inshore of the west coast of Korea (WCIK) from 29 July to 2 August 2003 $(35^{\circ}17'\;to\;36^{\circ}17'N,\;126^{\circ}00'\;to\;126^{\circ}25'E).$ A total of transect survey efforts were 810.27 n.m. in 2001 and 216.09 n.m. in 2003, which cover a survey areas of $23,012\;n.m^2\;and\;1,550\;n.m^2,$ respectively. There were 76 and 24 sightings for the finless porpoise during the surveys in the WCOK (2001) and the WCIK (2003), respectively. More than $80\%$ of the finless porpoise occurred near the coast within 15 n.m. from the land. Porpoise were observed mainly in a depth range from 20 to 50 m $(78\%).$ Few porpoise were observed in a depth shallower than 10 m or deeper than 60 m. The hazard-rate model, truncated at the largest $5\%$ distance, showed the best fitting from the frequency distribution of perpendicular distance of the finless porpoise sighted from the trackline in the WCOK (2001), while the uniform model showed the best fitting from in the WCIK (2003). Abundance of finless porpoises were estimated to be 58,650 individuals ($95\%$ CI=34,961-98,389) in the WCOK (2001) and 1,571 individuals ($95\%$ CI=881-2,800) in the WCIK (2003), respectively.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2005.10a
• /
• pp.5-10
• /
• 2005

T.S. HANBADA will navigate to maintain the adequate distance between own ship and other ships safely for about 17 hours on the about 2 kts. On the above situation, M broadcasting station requires to maintain the distance from 100m to 500m between ships. This paper aims to calculate the minimum safe distance between ships, the distance is assessed by using ES Model which is a quantitative model for evaluating the difficulty of shiphandling. After marine traffic flow simulation, minimum safe distance for HANBADA on the 2kts is about 260m based ES value. On this paper, the result was compared about its distance to the actual navigating distance.

• Journal of Technologic Dentistry
• /
• v.38 no.3
• /
• pp.151-156
• /
• 2016

Purpose: The dental implant should be enough to endure chewing load and it's required to have efficient design and use of implant to disperse the stress into bones properly. This study was to evaluate the stress distribution on a supporting bone by lengths and diameters of the implant fixture. Methods: The modeling and analysis of stress distribution was used for the simple molar porcelain crown model by Solidworks as FEM program. It was designed on applying with tightening torque of 20 Ncm of a abutment screw between a cement retained crown abutment and a fixture. The fixtures of experimental model used 10, 13mm by length and 4, 5mm by diameter. A external vertical loading on the two buccal cusps of crown and performed finite element analysis by 100 N. Results: The maximum von Mises stress(VMS) of all supporting bone models by fixture length and diameter were concentrated on the upper side of supporting compact bone. The maximum stress of each model under vertical load were 164.9 MPa of M410 model, and 141.2 MPa of M413 model, 54.3 MPa of M510 model, 53.6 MPa of M513 model. Conclusion: The stress reduction was increase of fixture's diameter than it's length. So it's effective to use the wider fixture as possible to the conditions of supporting bone.

• Journal of Environmental Science International
• /
• v.33 no.8
• /
• pp.591-604
• /
• 2024

To investigate the frequency and trajectories of volcanic ash from Mt. Baekdu reaching the Korean Peninsula, a forward trajectory analysis was conducted using the Hybrid Single-Particle Lagrangian Integrated Trajectory (HYSPLIT) model. Through a cluster analysis of air parcel trajectories, we identified the main pathways of the volcanic ash from Mt. Baekdu entering the Korean Peninsula and analyzed the synoptic meteorological conditions on those days. The frequency of volcanic ash reaching the Korean Peninsula was 82 times at an altitude of 1000 m and 70 times at 2000 m, with an increasing trend from 2016 to 2022. This increase is attributed to the weakening of westerly winds and the strengthening of north-south winds due to global warming. Five and three trajectory clusters were classified at 1000 m and 2000 m, respectively. At a starting altitude of 1000 m, most air parcels originating from Mt. Baekdu entered the Korean Peninsula under weather conditions (C2, C3) where the pressure gradient from the northwest to the southeast was small, resulting in weak northerly winds. C2 and C3 showed shorter trajectories, which occurred in all seasons, except summer. At a starting altitude of 2000 m, air parcels mostly passed over the Korean Peninsula in a synoptic pattern similar to that at 1000 m in altitude; however, the air parcels had simpler paths and less frequent inflow. C2, at a starting altitude of 2000 m, originates from Mount Baekdu, crosses the center of the Korean Peninsula, and continues to the central region. At a starting altitude of 1000 m, volcanic ash can enter the Korean Peninsula when there is no strong low-pressure system to the southeast of the Korean Peninsula, whereas at 2000 m, volcanic ash can enter the Korean Peninsula when the Siberian high-pressure system is weak.

• Journal of Sensor Science and Technology
• /
• v.5 no.4
• /
• pp.17-24
• /
• 1996

Planar multi-junction thermal converters were fabricated for precise measurements of the ac voltage and current by an ac-dc transfer method. A heater and a thermocouple array were fabricated onto a sandwiched membrane, $Si_{3}N_{4}$ (200 nm) / $SiO_{2}$ (400 nm) / $Si_{3}N_{4}$ (200 nm), a thickness of $0.8\;{\mu}m$ and a size of $2{\times}4\;mm^{2}$, which is supported by a surrounding frame. The NiCr heater is located at the center of the membrane vertically. Hot junctions of $48{\sim}156$ pairs of thermocouples (Cu-CuNi44) are located near or onto the heater, and cold junctions are located onto the silicon frame. Output of the thermal converters for 10 mA dc input was $76\;mV{\sim}382\;mV$ dependent on a model, and short term stability of the outputs was ${\pm}5{\sim}15\;ppm$/ 10 min with 5 mA dc input. Responsivity in air was in the range of $3.9{\sim}14.5V/W$. Responsivity of the model BF48 in air which has 48 thermocouples was 2 times or greater than that of 3 dimensional multi-junction thermal converter in vacuum which has 56 thermocouples. AC-DC transfer differences with an input of 10 mA or less were less than ${\pm}1\;ppm$ in the frequency range from 5 Hz to 2 kHz, and about $2{\sim}3\;ppm$ at 5 kHz and 10 kHz.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.24 no.5
• /
• pp.502-507
• /
• 2015

In this study, a microscale drilling process was conducted to evaluate the cutting characteristics of functionally graded materials. A mixture of M2 and Cu powders were formed and sintered to produce disk specimens of various compositions. Subsequently, a microscale hole was created in the specimen by using a desktop-size micro-machining system. By using design of experiments and analysis of variance, it was found that the M2-Cu composition, spindle speed, and the interactions between these two factors had significant effects on the magnitude of cutting forces. However, the influence of feed rate on the cutting force was negligible. A mathematical model was established to predict the cutting force under a wide range of process conditions, and the reliability of the model was confirmed experimentally. In addition, it was observed that increasing the wt% of Cu in an M2-Cu specimen increased the high-frequency amplitude of cutting forces.