• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.10 no.9
• /
• pp.1663-1670
• /
• 2006

Single crystal Fe thin films were grown directly onto n-Si(111) substrates by pulsed electrodeposition. Cyclic Voltammogram(CV) indicated that the $Fe^{2+}/n-Si(111)$ interface shows a good diode behavior by forming a Schottky barrier. From Mott-Schottky (MS) relation, it is found that the flat-band potential of n-Si(111) substrate and equilibrium redox potential of $Fet^{2+}$ ions are -0.526V and -0.316V, respectively. The nucleation and growth kinetics at the initial reaction stages of Fe/n-Si(111) substraste was studied by current transients. Current transients measurements have indicated that the deposition process starts via instantaneous nucleation and 3D diffusion limited growth. After the more deposition, the deposition flux of Fe ions was saturated with increase of deposition time. from the as-deposited sample obtained using the potential pulse of 1.4V and 300Hz, it is found that Fe nuclei grows to three dimensional(3D) islands with the average size of about 100nm in early deposition stages. As the deposition time increases, the sizes of Fe nuclei increases progressively and by a coalescence of the nuclei, a continuous Fe films grow on the Si surface. In this case, the Fe films show a highly oriented columnar structure and x-ray diffraction patterns reveal that the phase ${\alpha}-Fe$ grows on the n-Si(111) substrates.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2011.06a
• /
• pp.27-28
• /
• 2011

A solar flares have the 11-year cycle and release a large energy which may produce coronal mass ejections (CME). The NOAA (National Oceanic and Atmospheric Administration) predicted that the sun spot activity will be maximized in 2013-2014. A strong solar flare can cause the disturbance of global positioning system including various communication of TV, radio broadcasting. The actual solar storm in 1989 caused power outages in Canada during 9 hours and about 600 million people had experienced a blackout. Such a solar storm can shorten the GPS satellite's life span about 5 to 10 years which can be resulted in economic loss considering the amount of multi-billion won. This paper analyzed the recent solar storm of X-class occurred on 15th of February about 10:45 this year that was reached Korea (Bohyun observatory) on 18th of February about 10:30 (local time), and compared with the data of before and after a week. The proton data of 18th of February considered that the solar strom reached on earth showed a fluctuation compared to the data of before and after a week. The positioning results at Daejeon also showed higher positioning error compared to the data of before and after a week results.

• Journal of Bio-Environment Control
• /
• v.29 no.2
• /
• pp.105-109
• /
• 2020

This study was conducted to the improvement of solar light-based artificial light supply system and effect of lettuce cultivation. The artificial light supply system was consisted of units such as light source, power, system measurement and controller. The light source supply was composed of a solar transmitter and an LED lamp. The power supply consisted of an leakage breaker, SMPS, LED controller and relay. The solar transmitter was made of a quartz optical fiber with optimal light transmission. Artificial light used white lamp among LEDs. System measurement and control consisted of touch screen, Zigbee communication module and light quantity sensor. The results of test confirmed that the LED light is automatically activated when the intensity measured by the light intensity sensor is 200 μmolm^-2s^-1 or less. Moreover, the leaf length, root length, chlorophyll content and root fresh weight of optical fiber treatment was hight than LED lamp treatment. Therefore, it can be inferred that the energy-saving solar light collector device can be effective in the indoor lettuce production. However, the use of LED lamp is also recommended to assure the availability of sufficient sunlight in cloudy and rainy days.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.33 no.3
• /
• pp.214-218
• /
• 2020

In this study, Mg_xZn_1-xO thin films, which can be applied not only to active layers of light-emitting devices (LEDs), such as UV-LEDs, but also to solar cells, high mobility field-effect transistors, and power semiconductor devices, are fabricated using the sol-gel method. ZnO and Mg_0.3Zn_0.7O solution synthesized by the sol-gel method and the thin film were grown by spin coating on a Si (100) substrate and sapphire substrate. The solutions are synthesized by dissolving precursor materials in 2-methoxyethanol (2-ME) solvent, and then monoethanolamine (MEA) was added to the mixed solution as a sol stabilizer. Zinc acetate dihydrate is used as a ZnO precursor, while Mg nitrate hexahydrate and Mg acetate tetrahydrate are used as an MgO precursor. Then, the optical and structural characteristics of the fabricated thin films are compared. The molar concentration of the Zn precursor in the solvent is fixed at 0.3 M, and the amount of the Mg precursor is 30% of Mg²⁺/Zn²⁺. The optical characteristics are measured using an UV-vis spectrophotometer, and the transmittance of each wavelength is measured. Structural characteristics are measured using X-ray diffraction (XRD) and transmission electron microscopy (TEM). Composition analyses are performed using energy dispersive X-ray spectroscopy (EDS). The Mg_0.3Zn_0.7O thin film was well formed at the ratio of the Mg precursor added regardless of the type of Mg precursor, and the c-axis of the thin film was decreased, while the band gap was increased to 3.56 eV.

• Journal of Chest Surgery
• /
• v.43 no.4
• /
• pp.356-363
• /
• 2010

Background: Connexin 43-mediated gap junctional communication plays an important role in atherosclerosis. Numerous studies have demonstrated a correlation between mitral valve annular calcification and atherosclerotic disease. However, the relevance of connexin 43 to mitral valve disease remains unclear. We hypothesized that the mechanism contributing to mitral valve disease is associated with alterations in cell-to-cell communication mediated by changes in Connexin 43 expression. Material and Method: Twenty male New Zealand rabbits were divided into two groups: animals in group 1 (n=10) were fed a normal chow diet, whilst those in group 2 (n=10) received a diet containing 1% cholesterol for 12 weeks. After sacrificing the animals, the mitral valves were excised and analyzed with immunohistochemical staining and Real-time Reverse Transcriptase polymerase chain reaction (real time RT-PCR). Result: Myofibroblasts and macrophages were found concentrated within the endothelial layer on the ventricular side of the leaflet in the cholesterol diet group. Immunohistochemial staining showed elevated expression of connexin43 in the cholesterol diet group. Real-time RT-PCR revealed increased connexin43 mRNA levels in mitral valves from hypercholesterolemic animals. Conclusion: Our finding that connexin43 expression is increased in mitral valves of hypercholesterolemic rabbits suggests that alterations in cell-to-cell communication via connexin43 containing gap junctions play a role in the development of mitral valve disease in hypercholesterolemia.

• Journal of Science of Art and Design
• /
• v.5
• /
• pp.87-129
• /
• 2003

The purpose of this thesis is to propose a new concept of design of the 21st century, on the basis of the study on the general signification of the structures and the signs of industrial product design, by examining the difference between modern and post-modern design, which is expected to lead the users to different design practice and interpretation of it. The starting point of this study is the different styles and patterns of 'Gestalt' in the post-modern design of the late 20th century from modern design - the factor of determination in industrial product design. That is to say, unlike functional and rational styles of modern product design, the late 20th century is based upon the pluralism characterized by complexity, synthetic and decorativeness. So far, most of the previous studies on design seem to have excluded visual aspects and usability, focused only on effective communication of design phenomena. These partial studies on design, blinded by phenomenal aspects, have resulted in failure to discover a principle of fundamental system. However, design varies according to the times; and the transformation of design is reflected in Design Pragnanz to constitute a new text of design. Therefore, it can be argued that Design Pragnanz serves as an essential factor under influence of the significance of text. In this thesis, therefore, I delve into analysis of the 20th century product design, in the light of Gestalt theory and Design Pragnanz, which have been functioning as the principle of the past design. For this study, I attempted to discover the fundamental elements in modern and post-modern designs, and to examine the formal structure of product design, the users' aesthetic preference and its semantics, from the integrative viewpoint. Also, with reference to history and theory of design my emphasis is more on fundamental visual phenomena than on structural analysis or process of visualization in product design, in order to examine the formal properties of modern and post-modern designs. Firstly, In Chapter 1, 'Issues and Background of the Study', I investigated the Gestalt theory and Design Pragnanz, on the premise of formal distinction between modern and post-modern designs. These theories are founded upon the discussion on visual perception of Gestalt in Germany in 1910's, in pursuit of the principle of perception centered around visual perception of human beings. In Chapter 2, I dealt with functionalism of modern design, as an advance preparation for the further study on the product design of the late 20th century. First of all, in Chapter 2-1, I examined the tendency of modern design focused on functionalism, which can be exemplified by the famous statement 'Form follows function'. Excluding all unessential elements in design - for example, decoration, this tendency has attained the position of the international style based on the spirit of Bauhause - universality and regularity - in search of geometric order, standardization and rationalization. In Chapter 2-2, I investigated the anthropological viewpoint that modern design started representing culture in a symbolic way including overall aspects of the society - politics, economics and ethics, and its criticism on functionalist design that aesthetic value is missing in exchange of excessive simplicity in style. Moreover, I examined the pluralist phenomena in post-modern design such as kitsch, eclecticism, reactionism, hi-tech and digital design, breaking away from functionalist purism of modern design. In Chapter 3, I analyzed Gestalt Pragnanz in design in a practical way, against the background of design trends. To begin with, I selected mass product design among those for the 20th century products as a target of analysis, highlighting representative styles in each category of the products. For this analysis, I adopted the theory of J. M Lehnhardt, who gradated in percentage the aesthetic and semantic levels of Pragnantz in design expression, and that of J. K. Grutter, who expressed it in a formula of M = O : C. I also employed eight units of dichotomies, according to the G. D. Birkhoff's aesthetic criteria, for the purpose of scientific classification of the degree of order and complexity in design; and I analyzed phenomenal aspects of design form represented in each unit. For Chapter 4, I executed a questionnaire about semiological phenomena of Design Pragnanz with 28 units of antonymous adjectives, based upon the research in the previous chapter. Then, I analyzed the process of signification of Design Pragnanz, founded on this research. Furthermore, the interpretation of the analysis served as an explanation to preference, through systematic analysis of Gestalt and Design Pragnanz in product design of the late 20th century. In Chapter 5, I determined the position of Design Pragnanz by integrating the analyses of Gestalt and Pragnanz in modern and post-modern designs In this process, 1 revealed the difference of each Design Pragnanz in formal respect, in order to suggest a vision of the future as a result, which will provide systemic and structural stimulation to current design.

• The Korean Journal of Elementary Counseling
• /
• v.5 no.1
• /
• pp.159-184
• /
• 2006

Lately, the rapid social and family system change, the entrance examination-centered circumstance in education have a negative influence not only on making up the affirmative self-esteem but also on building up the personal relationship through mutual communication with friends of the same age. Making children adapt well to school life and develop a good relationship in the class is an important subject in educational field. Thus, various school activities should offer lots of opportunities to increase their affirmative self-esteem and more specified performance-centered programs are required toform a harmonious relationship among parties of students. The purpose of this study is to improve an affirmative self-esteern and a desirable personal relationship of children through developing friend-praise program and adapting it to children. Based on the above purpose, the following subjects for this study 'are suggested. Firstly, is the friend-praise program effective in forming an affirmative self-esteem of elementary students? Secondly, is the friend-praise program successful in improving a desirable personal relationship in an elementary school? In addition, two hypotheses of study are decided on the basis of theoretical background and the former study. Hypothesis 1. The friend-praise program will have a meaningful effect on improving an affirmative self-esteem. Hypothesis 2. The friend-praise program will have a meaningful effect on improving a desirable personal relationship. In order to improve the above hypotheses, the experiment was carried out with two classes on the fourth grade in M elementary school in Wonju with being divided into one experimental group and the other comparative group. The friend-praise program which was adapted to the experimental group was composed with four steps as 'introduction', 'preparation', 'operation' and 'closing'. This program which has twelve categories was executed once or twice in a week and each class was continued for forty or sixty minutes. Contrastively, comparative group had no application of the main program. For the purpose of proving the hypotheses after adapting the program to students, I have executed both self-esteem test and personal relationship test. The tests were performed with using SPSS/Windows V10.0 and the statistic was conducted through independant sample t-test for the difference between groups and contrastive sample t-test for the individual difference in each group. The results of this study can be summarized like the followings: Firstly, from the result of previous and after tests, there was no meaningful change in the comparative group, but the experimental group showed meaningful difference in all categories of self-esteem(t=-4.496, p=.000). Especially, the general self-esteem(t=-3.216, p=.003), social self-esteem(t=-2.680, p=.012), homely self-esteem(t=-3.732, p=.001), and school self-esteem(t=-3.902, p=.000) showed a meaningful difference. At the same time, the experimental group also showed meaningful difference with the comparative group in self-esteem(t=-4.758, p=.000). Especially, the general self-esteem(t=2.581, p=.017), social self-esteem(t=3.160, p=.003), homely self-esteem(t=4.283, p=.000), and school self-esteem(t=4.110, p=.000) showed a meaningful difference. As a result of this experiment, the friend-praise program will have a meaningful effect on improving an affirmative self-esteem was proved. Secondly, there was no meaningful change in the comparative group, but the experimental group showed meaningful difference in all categories of personal relationship(t=-4.131, p=.000). Specifically, satisfaction(t=-2.113, p=.045), communication(t=-3.381, p=.002), confidence(t=-3.517, p=.001), intimacy(t=-3.958, p=.000), sensibility(t=-2.955, p=.006), openness(t=-4.318, p=.000) and interest(t=-2.941, p=.000) showed a meaningful difference. In the same instant, the experimental group also showed meaningful difference with the comparative group in all categories of personal relationship(t=3.897, p=.000). Especially, satisfaction(t=2.257, p=.003), communication(t=3.527, p=.001), confidence(t=3.704, p=.001), intimacy(t=3.904, p=.000), sensibility (t=4.382, p=.000), openness(t=2.648, p=.013) and interest(t=2.944, p=.006) showed a meaningful difference. Accordingly, the friend-praise program will have a meaningful effect on improving a desirable personal relationship was proved. Judging from all these results, we should provide primary students with various opportunities to take part in active programs which help them to set up their righteous sense of value, to solve their own problems and to develop their potentials. Consequently, many kinds of practice-centered program like the friend-praise program should be developed more systematically and teachers should apply all those programs to students according to their individual level and developmental stage.

• The Bulletin of The Korean Astronomical Society
• /
• v.42 no.1
• /
• pp.40.1-40.1
• /
• 2017

The NISS (Near-infrared Imaging Spectrometer for Star formation history) is the near-infrared spectro-photometric instrument optimized to the Next Generation of small satellite series (NEXTSat). To achieve the major scientific objectives for the study of the cosmic star formation in local and distant universe, the spectro-photometric survey covering more than 100 square degree will be performed. The main observational targets will be nearby galaxies, galaxy clusters, star-forming regions and low background regions. The off-axis optics was developed to cover a wide field of view ($2deg.{\times}2deg.$) as well as the wide wavelength range from 0.95 to $2.5{\mu}m$, which were revised based upon the recent test and evaluation of the NISS instrument. The mechanical structure were tested under the launching condition as well as the space environment. The signal processing from infrared sensor and the communication with the satellite were evaluated after the integration into the satellite. The flight model of the NSS was assembled and integrated into the satellite. To verify operations of the satellite in space, the space environment tests such as the vibration, shock and thermal-vacuum test were performed. The accurate calibration data were obtained in our test facilities. Here, we report the test results of the flight model of the NISS.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.52 no.3
• /
• pp.39-47
• /
• 2015

In this paper, we propose a new time synchronization algorithm using CoAP(constrained-application protocol) in sensor network environment, which handles a technique that synchronizes an explicit timestamp between sensor nodes not including an additional module for time-setting and sensor node gateway linked to internet time server. CoAP is a standard protocol for sensor data communication among sensor nodes and sensor node gateway to be built much less memory and power supply in constrained network surroundings including serious network jitter, packet losses, etc. We have supplied an exact time synchronization implementation among small and cheap IP-based sensor nodes or non-IP based sensor nodes and sensor node gateway in sensor network using CoAP message header's option extension. On behalf of conventional network time synchronization method, as our approach uses an exclusive protocol 'CoAP' in sensor network, it is not to become an additional burden for synchronization service to sensor nodes or sensor node gateway. This method has an average error about 2ms comparing to NTP service and offers a low-cost and robust network time synchronization algorithm.

• Publications of The Korean Astronomical Society
• /
• v.21 no.2
• /
• pp.67-74
• /
• 2006

We have developed a control electronics system for an infrared detector array of KASINICS (KASI Near Infrared Camera System), which is a new ground-based instrument of the Korea Astronomy and Space science Institute (KASI). Equipped with a $512{\times}512$ InSb array (ALADDIN III Quadrant, manufactured by Raytheon) sensitive from 1 to $5{\mu}m$, KASINICS will be used at J, H, Ks, and L-bands. The controller consists of DSP(Digital Signal Processor), Bias, Clock, and Video boards which are installed on a single VME-bus backplane. TMS320C6713DSP, FPGA(Field Programmable Gate Array), and 384-MB SDRAM(Synchronous Dynamic Random Access Memory) are included in the DSP board. DSP board manages entire electronics system, generates digital clock patterns and communicates with a PC using USB 2.0 interface. The clock patterns are downloaded from a PC and stored on the FPGA. UART is used for the communication with peripherals. Video board has 4 channel ADC which converts video signal into 16-bit digital numbers. Two video boards are installed on the controller for ALADDIN array. The Bias board provides 16 dc bias voltages and the Clock board has 15 clock channels. We have also coded a DSP firmware and a test version of control software in C-language. The controller is flexible enough to operate a wide range of IR array and CCD. Operational tests of the controller have been successfully finished using a test ROIC (Read-Out Integrated Circuit).