• 대한화학회지
• /
• 제21권4호
• /
• pp.276-283
• /
• 1977

산성용액중에서 백금음극을 사용하여 중크롬산이온의 환원을 전위주사법 및 정전위전해에 의하여 검토하였다. 지지전해질로서 황산나트륨(pH 1.5∼4.0)을 사용한 비완충용액중의 중크롬산칼륨의 분극곡선은 3단파가 생기며 첫째파 및 둘째파의 파고는 각각 크롬(Ⅵ)농도 및 수소이온의 활동도에 비례하나 셋째파는 어느 것에도 비례하지 않았다. 첫째 및 둘째 peak이 전류는 전위주사속도(${\nu}$)에 비례하나 셋째 peak는 50mV/sec이하의 늦은 주사속도에서 ${\nu}^{1/2}$에 비례하였다. 정전위전해에 의하면, 크롬(Ⅵ)의 환원은 셋째 peak보다 더 base이고 초기 pH가 약 2.3 이상이 되면 완전히 억제되었다. 그러므로 이 세 peak는 각각 $Cr_2O_7^{\to}Cr^{3+},\;2H^+{\to}H_2$ 및 음극피막의 형성으로 간주하였다.

• 생명과학회지
• /
• 제16권6호
• /
• pp.1006-1013
• /
• 2006

식품안전에 대한 관심이 증가되고 있는 현재, 생물학적 화학적 위해요소로 분류되고 있고, 현재 많은 나라에서 규제치를 설정하고 있는 곰팡이 독소인 ochratoxin A(OTA)에 대한 정량적 측정이 가능한 고속검색법을 개발 하고자 단클론성 항체를 이용하여, 측정시 분리과정이 필요 없는 형광편광면역분석법(FPIA)을 개발하고 최적화 시켰다. 동일구조를 가지는 형광물질 표식자인 OTA-EDF를 합성하여 OTA에 대한 특이항체와 경쟁반응을 시켜 나타나는 형광-편광도(mP)의 변화를 측정하였다. 이는 면역분석법의 특이성과 민감성을 충분히 만족하였다. OTA의 검출범위는 0.5-200 ng/ml였고, 검출한계는 0.3 ng/ml였다. 개발된 분석법은 다른 곰팡이 독소들과의 교차반응은 없었고 높은 특이성과 재현성 및 회수율을 나타내었다. HPLC 방법에 의한 회수율은 88-84%로 다소낮게, FPlA법의 회수율은 90-110%로 다소 높게 나타났다. 16점의 현미시료를 분석하였을 때, 2점이 상관관계가 높게 12-20 ppb 정도 오염된 것으로 나타났다. 4점은 FPIA 및 HPLC 모두에서 음성으로 판정되었다. 개발된 FPIA는 복잡한 전처리 방법이 필요 없는 신속한 검색이 가능하므로, 식품 및 환경에서의 OTA 잔류 검사에 유용하게 사용될 수 있을 것이다.

• 한국재료학회지
• /
• 제22권11호
• /
• pp.626-630
• /
• 2012

The properties of SOFC unit cells manufactured using the decalcomania method were investigated. SOFC unit cell manufacturing using the decalcomania method is a very simple process. In order to minimize the ohmic loss of flattened tube type anode supports of solid oxide fuel cells(SOFC), the cells were fabricated by producing an anode function layer, YSZ electrolyte, LSM electrode, etc., on the supports and laminating them. The influence of these materials on the power output characteristics was studied when laminating the components and laminating the anode function layer between the anode and the electrolyte to improve the output characteristics. Regarding the performance of the SOFC unit cell, the output was 246 $mW/cm^2$ at a temperature of $800^{\circ}C$ in the case of not laminating the anode function layer; however, this value was improved by a factor of two to 574 $mW/cm^2$ due to the decrease of the ohmic resistance and polarization resistance of the cell in the case of laminating the anode function layer. The outputs appeared to be as high as 574 and 246 $mW/cm^2$ at a temperature of $800^{\circ}C$ in the case of using decalcomania paper when laminating the electrolyte layer using the in dip-coating method; however, the reason for this is that interfacial adhesion was improved due to the dense structure, which leads to a thin thickness of the electrolyte layer.

• Korean Chemical Engineering Research
• /
• 제48권3호
• /
• pp.311-315
• /
• 2010

공기 오염에 의해 $SO_2$가 포함된 공기가 PEMFC cathode에 유입되어 전극 성능에 미치는 영향에 대해 연구하였다. 오염된 공기 접촉 후 저하된 성능회복을 위해 청정공기 유입, 순환전압측정법(cycle voltammetry, CV), 고전압 체류법(high voltage holding)을 사용하였다. 공기에 혼합된 $SO_2$농도 범위는 20 ppb~1.3 ppm이었다. 성능 감소 및 회복 측정은 일정전류에서 전압변화를 측정하는 방법, I-V 분극곡선 측정법, 임피던스측정법을 이용하였다. 20 ppb 농도로 $SO_2$를 200시간 주입 후 전지 전압은 주입 전보다 17 mV 감소하였다. 청정공기 주입, CV, 고전압체류방법에 의해 S가 Pt로부터 탈착되어 전지성능은 일부 회복되었다.

• 한국전기전자재료학회논문지
• /
• 제14권10호
• /
• pp.796-801
• /
• 2001

Ferroelectric 0.05PZN-xPZT(90/10)-(0.95-x)PZT(10/90) (x=0.65, 0.85) specimens were fabricated by the solid-state reaction method, and especially PZT(90/10) and PZT(10/90) powders were derived by the sol-gel method. All specimens showed a uniform ferroelectric grain without the presence of the pyrocholre phase. Average grain size increased with an increased in sintering temperature, the values for the x=0.65 and x=0.85 specimens sintered at 125$0^{\circ}C$ were 14.4$\mu$m and 9.8$\mu$m, respectively. The dielectric constant and dielectric loss of the x=0.65 specimen sintered at 125$0^{\circ}C$ were 1247. 2.06%, respectively. The coercive field and the remanent polarization of x=0.65 and x=0.85 specimens sintered at 125$0^{\circ}C$ were 8.5kV/cm, 13$\mu$C/$\textrm{cm}^2$ and 17.2kV/cm, 28 $\mu$C/$\textrm{cm}^2$, respectively. The pyroelectric coefficient of the x=0.65 and x=0.85 specimens sintered at 125$0^{\circ}C$ were 5.64$\times$10$^{-8}$ C/$\textrm{cm}^2$K and 2.76$\times$10$^{-8}$ C/$\textrm{cm}^2$K, respectively.

• Journal of Korean Vacuum Science & Technology
• /
• 제4권1호
• /
• pp.6-10
• /
• 2000

Ferroelectric YMnO$_3$ thin films were deposited on $Y_2$O$_3$/si(100) substrates by metalorganic chemical vapor deposition. The YMnO$_3$ thin films annealed in vacuum ambient (100 mTorr) above 75$0^{\circ}C$ show hexagonal structured YMnO$_3$. However, the film annealed in oxygen ambient shows poor crystallinity, and the second phase as $Y_2$O$_3$ and orthorhombic-YMnO$_3$ were shown. The annealing ambient and pressure on the crystallinity of YMnO$_3$ thin films is very important. The C-V characteristics have a hysteresis curve with a clockwise rotation, which indicates ferroelectric polarization switching behavior. When the gate voltage sweeps from +5 to 5 V, the memory window of the Pt/YMnO$_3$/Y$_2$O$_3$/Si gate capacitor annealed at 85$0^{\circ}C$ is 1.8 V. The typical leakage current densities of the films annealed in oxygen and vacuum ambient are about 10$^{-3}$ and 10$^{-7}$ A/cm$^2$ at applied voltage of 5 V.

• Membrane and Water Treatment
• /
• 제1권2호
• /
• pp.139-158
• /
• 2010

This work focuses on the application of nanofiltration (NF) to the concentration of a pharmaceutical product, Clavulanate ($CA^-$), from clarified fermentation broths, which show a complex composition with six main identified ions ($K^+$, $Cl^-$, ${NH_4}^+$, $H_2{PO_4}^-$, ${SO_4}^{2-}$ and $CA^-$), glucose and glycerol. The solutes transport through the NF membrane pores was investigated using the SEDE (Steric, Electric and Dielectric Exclusion) model. This model was applied to predict the rejection rates of the initial feed solution and the final concentrated solution (10-fold concentrated solution). The best results were achieved with a single fitted parameter, ${\varepsilon}_p$ (the dielectric constant of the solution inside pores) and considering that the membrane selectivity is governed by steric, electric (Donnan) and Born dielectric exclusion mechanisms. While the predicted intrinsic rejections of solutions comprising up to six ions and uncharged solutes were in good agreement with the experimental values, the deviations were much larger for the 10-fold concentrated solution.

• 한국정밀공학회지
• /
• 제19권4호
• /
• pp.195-201
• /
• 2002

We propose a new scheme of high-resolution heterodyne interferometer that employs the two-axial mode He-Ne laser with an inter-mode beat frequency of 600~1000 MHz. An electronic RF-heterodyne circuit lowers the beat frequency down to 5 MHz, so that the phase change of the interferometer output is precisely measured with a displacement resolution of 0.1 nanometer without significant loss of dynamic bandwidth. A thermal control scheme is adopted to stabilize the cavity length with ainus to suppress frequency drifts caused by the phenomena of frequency pulling and polarization anisotropy of the two-axial made laser to a stability level of 2 parts in $10^9$. The two-axial mode HeNe laser yields a high output power of 2.0 mW, which allows us to perform multiple measurements of up to 10 machine axes simultaneously.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제49권2호
• /
• pp.98-102
• /
• 2000

Ferroelectric PZT heterolayered thin films were fabricated by spin coating method on the Pt/Ti/SiO2/Si substrate using PZT(10/90) and PZT(90/10) m7etal alkoxide solutions. All PZT heterolayered films showed a homogeneous grain structures without presence of rosette structure. It can be assumed that the lower PZT layers played a role of nucleation site for the formation of the upper PZT layer. Pb-deficient PZT phase was formed at PZT/Pt interface due to the diffusion of Pb element into a Pt bottom electrode. The relative dielectric constant and the dielectric loss of the PZT-6 film were 567 and 3.6%, respectively. Increasing the number of coatings, remanent polarization and coercive field were decreased and the values of the PZT-6 heterolayered film were $7.18\muC/cm^2$ and 68.5kV/cm, respectively. Leakage current densities were increased with increasing the number of coatings, and the value of the PZT-4 film was about $7\times10-8A/cm^2$ at 0.05MV/cm.

• 한국표면공학회지
• /
• 제52권4호
• /
• pp.233-238
• /
• 2019

The formation behavior of zinc phosphate conversion coating (ZPCC) on SCM430 alloy was investigated in 25 vol.% of 1M ZnO + 170 ml/L solution containing various $Fe(NO_3)_2$ concentrations, using open-circuit potential(OCP), electrochemical impedance spectroscopy(EIS), cyclic polarization(CP) curve and tape peel test. OCP of SCM430 alloy and corrosion current density increased with increasing $Fe(NO_3)_3$ concentration. Resistance of films formed on SCM430 alloy by chemical conversion treatment decreased with increasing $Fe(NO_3)_3$ concentration. Color and adhesion of chemical conversion coatings became darker and worse, respectively, with increasing $Fe(NO_3)_3$ concentration. It is concluded that addition of $Fe(NO_3)_3$ into a zinc phosphating bath leads to faster reaction to form porous surface coatings with poor adhesion and corrosion resistance.