• Korean Chemical Engineering Research
• /
• v.52 no.3
• /
• pp.328-334
• /
• 2014

This study examined the effect of concentration polarization on permeate flux in forward osmosis (FO) membrane process for saline and sucrose solution. The reduction in permeate flux during the FO membrane process is largely due to the formation of concentration polarization on membrane surfaces. The flux reduction due to internal concentration polarization formed on the porous support layer was larger than that due to the external concentration polarization on the active membrane surface. Water permeate flux through the FO membrane increased nonlinearly with the increase in osmotic pressure. The water permeability coefficient was $1.8081{\times}10^{-7}m/s{\cdot}atm$ for draw solution on active layer (DS-AL) mode and $1.0957{\times}10^{-7}m/s{\cdot}atm$ for draw solution on support layer (DS-SL) mode in NaCl solution system. The corresponding membrane resistance was $5.5306{\times}10^6$ and $9.1266{\times}10^6s{\cdot}atm/m$, respectively. With respect to the sucrose solution, the permeate flux for DS-AL mode was 1.33~1.90 times higher than that for DS-SL mode. The corresponding variation in the permeation flux (J) due to osmotic pressure (${\pi}$) would be expressed as $J=-0.0177+0.4506{\pi}-0.0032{\pi}^2$ for the forward and $J=0.0948+0.3292{\pi}-0.0037{\pi}^2$ for the latter.

• Corrosion Science and Technology
• /
• v.7 no.6
• /
• pp.319-323
• /
• 2008

The polarization resistance of mild steel in 0.5M hydrochloric acid has been evaluated by using impedance (Z) and linear polarization (LPR) techniques and compared to the noise resistance obtained from electrochemical noise data. The degree of localization of this general corrosion has also been discussed by evaluating localization index and power spectral density. Polarization resistance obtained by LPR technique ($28\Omega$) was higher than that obtained by impedance technique ($15\Omega$). Noise resistance ($11\Omega$) was much lower than polarization resistance measured by both of above techniques. Higher polarization resistance obtained by LPR technique is generally caused by passivation effect in the presence of scales or deposits which can introduce an increased resistance as can low conductivity electrolytes. The reason why noise resistance is lower than polarization resistance is the effect of background noise detected by using three platinum electrodes cell in 0.5M hydrochloric acid. Slope($-\beta$) of power spectral density (PSD) obtained from analysis of noise data ($-\beta$ = 3.3) was much higher than 2 which indicates mild steel corroded uniformly. Localization index (LI) calculated from statistical analysis (LI=0.08) is much lower than 1 which indicates that mild steel did not corroded locally. However, LI value is still higher than $1x10^{-3}$ and this indicates that mild steel corroded locally in microscopic point of view.

• Restorative Dentistry and Endodontics
• /
• v.23 no.1
• /
• pp.502-514
• /
• 1998

The purpose of this study is to observe the corrosion characteristcs of four dental amalgams(CAULK FINE CUT, CAULK SPHERICAL, DISPERSALLOY, TYTIN) and to determine a function of chloride concentration through the anodic polarization curve obtained by using a potentiostat. After each amalgam alloy and Hg being triturated, the triturated mass was inserted into the cylinderical metal mold, and condensed by hydrolic pressure. Each specimen was removed from the metal mold. 24 hours after condensation, specimens were polished with the emery paper and stored at room temperature for 6 months. The anodic polarization curves were employed to compare the corrosion behaviours of the amalgam m KCl and KCl-NaCl solution, which had chlonde concentration of 0.4 g/l, 0.8 g/l, 1.2 gil, and 1.6 gil at $37^{\circ}C$ with 3-electrode potentiostat. After the immersion of specimen in electrolyte for 1 hour, the potential scan was begun. The potential scan range was - 1500mV ~+800mV(vs. S.C.E.) in the working electrode and the scan rate was 50mV/sec. The results were as follows, 1. The corrosion potential. the potential of anodic current peak, and transpassive potential in the solution of high chloride concentration shifted to more cathodic direction than those in the solution of low concentration, and the current density in the solution of high chloride concentration was higher than that in the solution of low concentration. 2. The corrosion potential, the potential of anodic current peak, and transpassive potential for CAULK FINE CUT amalgam were the most cathodic among the others, and the current density were the highest among the others. 3. In the solution of low chloride concentration, the corrosion potential, the potential of anodic current peak, and transpassive potential for DISPERSALLOY were the most anodic among the others, however in the solution of high chloride concentration, those for TYTIN were the most anodic among the others. 4. The anodic polarization curve for CAULK SPHERICAL was similar to that for high copper amalgams.

• International Journal of Concrete Structures and Materials
• /
• v.18 no.1E
• /
• pp.3-9
• /
• 2006

Five slab specimens with predefined cracks are examined to evaluate the corrosion behavior of epoxy-coated bars in chloride contaminated concrete, using linear polarization method. The test specimens were subjected to alternating weekly cycles of ponding in a salt solution and drying for 48 weeks. Test results show that the current density of the specimen of normal steel bars becomes 0.715 ${\mu}A/cm^2$ indicating that the steel bars are in moderate or high corrosion condition. However, the corrosion rates of the specimens with damaged epoxy-coated bars are significantly below 0.1 ${\mu}A/cm^2$ and the bars appears to be in passive condition. The damaged epoxy-coated bars with a corrosion inhibitor of calcium nitrite showed a corrosion rate of 0.110 ${\mu}m/year$ or 56 percents of the corrosion rate of damaged epoxy-coated specimen without such an inhibitor, 0.195 ${\mu}m/year$. However, the corrosion rates of specimens containing the other two corrosion inhibitors, a combination of amines and esters or mixtures of organic alkenyl dicarboxyl acid salts are quite equivalent to the control specimen. The research technique of linear polarization resistance method has proven itself to be useful in measuring corrosion rates of reinforcement in concrete.

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.36 no.1
• /
• pp.1-6
• /
• 2022

The tuber of Pinellia ternata (Thunb.) Brei (TPT) used in traditional Oriental medicine for the treatment of cough, sputum, vomiting, and insomnia, possesses antioxidant, antibacterial, and anti-inflammatory effects. Although recent studies have reported the anticancer effects of TPT in several cancer cells, it is still unclear whether TPT regulates tumor-associated macrophage (TAM) characterized by the immunosuppressive M2 macrophage phenotype. Our results showed that the ethanol extract of TPT (ETPT) suppressed the migration of RAW264.7 mouse macrophage cells and THP-1 human monocytes differentiated into macrophages towards the conditioned media (CM) collected from lung cancer cells, suggesting that ETPT would attenuate the recruitment of macrophages into tumors. In addition, ETPT suppressed the interleukin (IL)-4 or IL-6-induced M2 macrophage polarization in RAW264.7 cells. ETPT treatment not only downregulated the mRNA expression of M2 macrophage markers including arginase-1, mannose receptor C type 1 (MRC-1), and IL-10, but also inhibited the phosphorylation of signal transducer and activator of transcription 3 (STAT3) and STAT6, general regulators of M2 macrophage polarization. Finally, the transwell assay results showed that the CM from M2-polarized RAW264.7 cells increased the migration of mouse lewis lung carcinoma (LLC) cells, while those from RAW264.7 cells co-treated with ETPT and IL-6 significantly reduced the migration of LLC cells. Taken together, our observations clearly demonstrate that ETPT suppressed the cancer cell migration by regulating macrophage recruitment and M2 macrophage polarization.

• Food Science of Animal Resources
• /
• v.43 no.4
• /
• pp.703-711
• /
• 2023

As an initial study to elucidate the molecular mechanism of how probiotics modulate macrophage activity, we monitored mRNA expression patterns in peritoneal macrophages (PMs) treated with two different strains of probiotics. After treatment with either Weissella cibaria WIKIM28 or Latilactobacillus sakei WIKIM50, total RNAs from PMs were isolated and subjected into gene chip analyses. As controls, mRNAs from vehicle (phosphate-buffered saline, PBS)-treated PMs were also subjected to gene chip analysis. Compared to vehicle (PBS)-treated PMs, WIKIM28-treated and WIKIM50-treated PMs exhibited a total of 889 and 432 differentially expressed genes with expression differences of at least 4 folds, respectively. Compared to WIKIM28-treated PMs, WIKIM50-treated PMs showed 25 up-regulated genes and 21 down-regulated genes with expression differences of more than 2 folds. Interestingly, mRNA transcripts of M2 macrophage polarization marker such as anxa1, mafb, and sepp1 were increased in WIKIM50-treated PMs comparing to those in WIKIM28-treated PMs. Reversely, mRNA transcripts of M1 macrophage polarization marker such as hdac9, ptgs2, and socs3 were decreased in WIKIM50-treated PMs comparing to those in WIKIM28-treated PMs. In agreement with these observations, mRNA expression levels of tumor necrosis factor-α and interleukin-1α were significantly reduced in WIKIM50-treated macrophages compared to those in WIKIM28-treated macrophages. These results may indicate that probiotics can be classified as two different types depending on their ability to convert macrophages into M1 or M2 polarization.

• Current Optics and Photonics
• /
• v.1 no.2
• /
• pp.150-156
• /
• 2017

A diffraction limited optical system for head mounted displays (HMDs) was designed. This optical system consists of four modules, including 1:5 mm and 5:30 mm beam expanders, polarization grating-polarization conversion system (PG-PCS) and refractive/diffractive projection optical module. The PG-PCS module transforms the unpolarized Gaussian beam to a linearly polarized beam and it simultaneously homogenizes the spatial intensity profile. The optical projector module has a $30^{\circ}$ field of view, a 22 mm eye relief, and a 10 mm exit pupil diameter with a compact structure. Common acrylic materials were utilized in the optical design process; therefore, the final optical system was lightweight. The whole optical system is suitable for a 0.7 inch liquid crystal on silicon microdisplay (LCOS) with HDTV resolution ($1920{\times}1080$) and $8.0{\mu}m$ pixel pitch.

• Journal of Surface Science and Engineering
• /
• v.18 no.4
• /
• pp.153-163
• /
• 1985

In the electroless nickel plating bath which contained nickel sulfate, sodium hypophosphite, boric acid and triethanolamine, effect of their concentration on the rate of deposition was tested by gravimetric method and polarization method. The polarization method that polarize small range of voltage anodicaly and cathodicaly at the mixed potential in the electroless plating bath can calculate mixed current (depositing rate) from $i_{mp}=\frac {i}{\eta}\;\frac{RT}{nF}\;or\;i_{mp}=\frac{i}{\eta}\;\frac{1}{2.3}(\frac{b_a\;\;b_c}{b_c+b_a})$ Where $i_{mp}$ is the depositing current, i is the polarized current, ${\eta}$ is the polarized voltage, $b_a\;and\;b_c$ are the Tafel slop of anodic and cathodic polarization curves respectively. The calculated mixed current ($i_{mp}$) is proportional to the depositing rate obtained by gravimetric method and corresponded mostly to the real depositing rate by multifying supplementary constant. The polarization method can be used for founding inclination of reaction on various concentration of each composition. Decreasing or increasing concentration of triethanolaminc as a complexing agent , the depositing rate is decreased and when the bath contained 25-50mL/L of triethanoloamine, the depositing rate is increased. The depositing rate is increased with increasing the concentration of boric acid, and when the bath contained 0.5M of boric acid, the depositing rate is increased abruptly. The optimum composition of the electroless nickel bath was estimated 0.1M of nickel sulfate, 0.25M of sodium hypophosphite, 0.5M of boric acid, and 25-50mL/L of triethanalamine.

• Corrosion Science and Technology
• /
• v.3 no.1
• /
• pp.1-5
• /
• 2004

A polarization resistance is generally used to estimate the corrosion rate in the corrosion monitoring by an electrochemical impedance method. When the Faradaic impedance has a time constant due to the reaction intermediate, the electrochemical impedance describes more than one loop on the complex plane. For example, the electrochemical impedance of iron in acidic solution shows capacitive and inductive loops on the complex plane. In this case, the charge transfer resistance and the polarization resistance are determined at middle and low frequency ranges, respectively. Which should be selected for corrosion resistance in corrosion monitoring, the charge transfer resistance or the polarization resistance'? In the present paper, the above-mentioned question is examined theoretically and experimentally.

• IMMUNE NETWORK
• /
• v.24 no.3
• /
• pp.27.1-27.14
• /
• 2024

The tumor microenvironment (TME) is formed by several immune cells. Notably, tumor-associated macrophages (TAMs) are existed in the TME that induce angiogenesis, metastasis, and proliferation of cancer cells. Recently, a point-mutated variant of IL-32θ was discovered in breast cancer tissues, which suppressed migration and proliferation through intracellular pathways. Although the relationship between cancer and IL-32 has been previously studied, the effects of IL-32θ on TAMs remain elusive. Recombinant human IL-32θ (rhIL-32θ) was generated using an Escherichia coli expression system. To induce M0 macrophage polarization, THP-1 cells were stimulated with PMA. After PMA treatment, the cells were cultured with IL-4 and IL-13, or rhIL-32θ. The mRNA level of M1 macrophage markers (IL-1β, TNFα, inducible nitric oxide synthase) were increased by rhIL-32θ in M0 macrophages. On the other hand, the M2 macrophage markers (CCL17, CCL22, TGFβ, CD206) were decreased by rhIL-32θ in M2 macrophages. rhIL-32θ induced nuclear translocation of the NF-κB via regulation of the MAPK (p38) pathway. In conclusion, point-mutated rhIL-32θ induced the polarization to M1-like macrophages through the MAPK (p38) and NF-κB (p65/p50) pathways.