• Korean Journal of Soil Science and Fertilizer
• /
• v.44 no.1
• /
• pp.67-77
• /
• 2011

Heavy metal remediation in shooting range soil is a challenge over the world. The excessive Pb accumulation in the soil can deteriorate soil quality and fertility. The objectives of this research were to evaluate the efficiency of biochar (BC) in improving the physicochemical and biological properties of the soil and to evaluate its effect on Pb availability in a military shooting range soil. Sandy loam soil was collected from shooting range of Gyeonggi Province, South Korea and was incubated for 30 days with different application rates (0-30% w $w^{-1}$) of BC. The results showed that the addition of BC increased aggregate stability, nitrogen (N) and phosphorus (P) contents, and enzyme activities in soil. Sequential extraction showed that residual and organic bound fractions in the soil amended with BC increased by 33.1 and 16.7%, respectively, and the exchangeable fraction decreased by 93.7% in the soil amended with BC, compared to the unamended soil. We concluded that the application of BC could not only improve physicochemical and biological soil qualities but also stabilize Pb in a shooting range soil.

• International Journal of Concrete Structures and Materials
• /
• v.9 no.4
• /
• pp.475-486
• /
• 2015

Mode II fracture toughness ($K_{IIc}$) of fiber reinforced concrete (FRC) has been widely investigated under various patterns of test specimen geometries. Most of these studies were focused on single type fiber reinforced concrete. There is a lack in such studies for hybrid fiber reinforced concrete. In the current study, an experimental investigation of evaluating mode II fracture toughness ($K_{IIc}$) of hybrid fiber embedded in high strength concrete matrix has been reported. Three different types of fibers; namely steel (S), glass (G), and polypropylene (PP) fibers were mixed together in four hybridization patterns (S/G), (S/PP), (G/PP), (S/G/PP) with constant cumulative volume fraction ($V_f$) of 1.5 %. The concrete matrix properties were kept the same for all hybrid FRC patterns. In an attempt to estimate a fairly accepted value of fracture toughness $K_{IIc}$, four testing geometries and loading types are employed in this investigation. Three different ratios of notch depth to specimen width (a/w) 0.3, 0.4, and 0.5 were implemented in this study. Mode II fracture toughness of concrete $K_{IIc}$ was found to decrease with the increment of a/w ratio for all concretes and test geometries. Mode II fracture toughness $K_{IIc}$ was sensitive to the hybridization patterns of fiber. The (S/PP) hybridization pattern showed higher values than all other patterns, while the (S/G/PP) showed insignificant enhancement on mode II fracture toughness ($K_{IIc}$). The four point shear test set up reflected the lowest values of mode II fracture toughness $K_{IIc}$ of concrete. The non damage defect concept proved that, double edge notch prism test setup is the most reliable test to measure pure mode II of concrete.

• Bulletin of the Korean Space Science Society
• /
• 2010.04a
• /
• pp.38.2-38.2
• /
• 2010

We have examined the occurrence probability of solar proton events (SPEs) and their peak fluxes depending three flare parameters (X-ray peak flux, longitude, and impulsive time). For this we used NOAA SPEs from 1976 to 2006, and their associated X-ray flare data. As a result, we selected 166 proton events that were associated with major flares; 85 events associated with X-class flares and 81 events associated with M-class flares. Especially the occurrence probability strongly depends on these three parameters. In addition, the relationship between X-ray flare peak flux and proton peak flux as well as its correlation coefficient are strongly dependent on longitude and impulsive time. Among NOAA SPEs from 1997 to 2006, most of the events are related to both flares and CMEs but a few fraction of events (5/93) are only related with CMEs. We carefully identified the sources of these events using LASCO CME catalog and SOHO MDI data. Specifically, we examined the directions of CMEs related with the events and the history of active regions. As a result, we were able to determine active regions which are likely to produce SPEs without ambiguity as well as their longitudes at the time of SPEs by considering solar rotation rate. From this study, we found that the longitudes of five active regions are all between $90^{\circ}W$ and $120^{\circ}W$. When the flare peak time is assume to be the CME event time, we confirmed that the dependence of their rise times (proton peak time - flare peak time) on longitude are consistent with the previous empirical formula. These results imply that five events should be also associated with flares which were not observed because they occurred from back-side. Now we are examining the occurrence probability of SPEs depending on CME parameters. Finally, we will discuss the future prospects on the development of an empirical SPE forecast model based on the information of flares and CMEs.

• Journal of Animal Science and Technology
• /
• v.44 no.5
• /
• pp.633-642
• /
• 2002

Enteric colibacillosis has economically become an important disease of young animals as a result of increasing intensification of farrowing management. The objective of this experiment is to isolate fimbrial antigen from enterotoxigenic E. coli F41, to develop specific polyclonal IgY which can effectively neutralize or reduce the proliferation of pathogens in feed or living animal system, and to apply IgY technologies to animal industry. The results obtained were as follows: The molecular weight of the purified F41 antigen was 29,500 dalton on sodium dodecyl sulfate-polyacrylamide gels. Fimbrial antigen was confirmed by the western blot method. It was observed that after immunization the level of serum antibody titer of laying hen was shown in two weeks and gradually increased. The antibody titer in egg yolk appeared two weeks after it was shown in serum antibody. The titers of egg yolk antibody were gradually increased to the maximum level of 320,000 (antigen 50${\mu}g$/$m\ell$), 450,000 (antigen 200${\mu}g$/$m\ell$), and 320,000 (antigen 600${\mu}g$/$m\ell$). According to the results of specificity test by ELISA, the anti-F41 antibodies from chicken serum and egg yolk reacted only with ETEC F41 antigen. There was no cross reaction with other ETEC strains (K88, K99, and 987P). In vitro condition, as a result of antigen binding ability of yolk antibodies, bacterial concentration was rapidly decreased to $10^5$ CFU/$m\ell$ from $10^9$ CFU/$m\ell$ when 2${\sim}$4 mg/$m\ell$ of freeze dried WSF (water soluble fraction) was added.

• Resources Recycling
• /
• v.9 no.6
• /
• pp.36-44
• /
• 2000

Fly ash was composed of the unburned carbon and mineral particles. The former was able to attach on the bubbles, while the latter was not. Therefore, it was possible to separate the unburned carbon and the mineral from fly ash using the froth flotation process. This study was carried out to evaluate the separation efficiency as a function of the ny ash particle properties in the column flotation. Separation efficiency was analyzed for various size fraction of -38 fm,38~125 fm and 1125 W, and for various fly ash samples containing 7, 11, and 20 wt% unburned carbon. For the size fractions of -38 fm containing 7 wt% unburned carbon, separation efficiency was 86ft, whereas separation efficiency was found to be 74% for the size fraction of +125$\mu\textrm{m}$ containing 20 wt% unburned carbon. The results indicated that separation efficiency increased with the decrease in the particle size and the unburned carbon content of the fly ash.

• Journal of the Korean Society for Heat Treatment
• /
• v.14 no.3
• /
• pp.160-166
• /
• 2001

The change of ribbon geometry, microstructure and shape recovery with Mn contents, wheel speed and various annealing temperature have been studied in Fe-X%Mn-5Cr-5Co-4Si (X%=15, 20, 24) shape memory alloy (SMA) ribbons rapidly solidfied by single roll chill-block melt-spinning process. The thickness and width of melt-spun ribbons are reduced, results in refining and uniformalizing grains with increasing wheel speed. In the ribbons melt-spun at a wheel speed of 15m/sec, both ${\varepsilon}$ and ${\alpha}^{\prime}$martensites are formed in ribbon 1 (15.5wt%Mn), while only ${\varepsilon}$ martensite is revealed in ribbon 2 (20.2wt%Mn) and ribbon 3 (23.5wt%Mn). The volume fraction of ${\varepsilon}$ martensite is decreased with increasing Mn contents, and those of ${\varepsilon}$ as well ${\alpha}^{\prime}$martensites are increased due to thermal stress relief and grain growth with increasing annealing temperature. Ms temperatures of the ribbons 1, 2 and 3 are fallen with increasing Mn contents. $M_s$ temperatures of the ribbons 1, 2 and 3 annealed at $300^{\circ}C$ for 3 min are risen abruptly, but are nearly constant even at higher annealing temperature, i.e., 400, 500 and $600^{\circ}C$ for 3 min. Shape recovery of the ribbons 1, 2 and 3 increased 30%, 52% and 69% with Mn contents, respectively. Shape recovery of ribbon 1 (15.5wt%Mn) formed ${\varepsilon}$ and ${\alpha}^{\prime}$martensites decreased because of the presence of ${\alpha}^{\prime}$martensite but those of ribbon 2 (20.2wt%Mn) and ribbon 3 (23.5wt%Mn) formed ${\varepsilon}$ martensite increased with increasing annealing temperature.

• KSBB Journal
• /
• v.11 no.5
• /
• pp.606-612
• /
• 1996

A specific ammino auid in a mixture can be crystallized inside an ion exchange column when displacer concentration is high enough to concentrate the amino acid in a pure band beyond its solubility limit. Glutamic acid formpd a discrete crystal layer in a cation exchanger column by operating displacement development mode and using a high concentration of displacer NaOH. The glutamic acid crystal formed was eluded from the column with the effluent stream and collected in a fraction collector. When 1.0 M of NaOH was used as a displacer, more than 60% of the loaded glutamic acid was recovered as crystal. The continuous crystallization and dissolution of crystal occurred, resulting in apparent movement of the crystal along the column without clogging or pressure increase. NaOH was proved a better displacer than NaCl because hydroxide ions neutralized hydrogen ions released from the resin and thus reduced the number of hydrogen ion competing with sodium ion for re-adsorption. The displacement development process coupled with crystallization provided higher concentration and recovery of glutamic acrid than conventional chromatography.

• Korean Journal of Weed Science
• /
• v.14 no.1
• /
• pp.56-61
• /
• 1994

The cationic isoperoxidases were isolated from oat root tips which had been grown in treatment with $1{\times}10^{-4}$ M alachlor and purified about 30-fold by treatment with ethylalchol and ion exchange chromatography on DEAF-celluose and CM-sephadex medium. The oat root was found to contain three isoperoxidase. The major activity peak (B) represented 65% of the total isoperoxidase activity. After purification, the major peak of isoperoxidase was purified about 37-fold from the oat root. Analysis of the major peroxidase peak(column fraction 58-78) by SDS revealed a single band which corresponed to a molecular mass of 42.5 kD. In vitro, isoperoxidase activies were inhibited by IAA. Isoperoxidase(50 unit) significantly inhibited 70.2% of cell division in oat root and 54.2% of cell elongation in oat coleoptile as compared with control.

• Corrosion Science and Technology
• /
• v.7 no.1
• /
• pp.50-60
• /
• 2008

The majority of the described experimental results deal with relatively pure aluminium. Variations were made in the pretreatment of the aluminum substrates and an investigation was performed on the resulting changes in oxide layer composition and chemistry. Subsequently, the bonding behavior of the surfaces was investigated by using model adhesion molecules. These molecules were chosen to represent the bonding functionality of an organic polymer. They were applied onto the pretreated surfaces as a monolayer and the bonding behavior was studied using infrared reflection absorption spectroscopy. A direct and clear relation was found between the hydroxyl fraction on the oxide surfaces and the amount of molecules that subsequently bonded to the surface. Moreover, it was found that most bonds between the oxide surface and organic functional groups are not stable in the presence of water. The best performance was obtained using molecules, which are capable of chemisorption with the oxide surface. Finally, it was found that freshly prepared relatively pure aluminum substrates, which are left in air, rapidly lose their bonding capacity towards organic functional groups. This can be attributed to the adsorption of contamination and water to the oxide surface. In addition the adhesion of a typical epoxy-coated aluminum system was investigated during exposure to water at different temperatures. The coating was found to quite rapidly lose its adhesion upon exposure to water. This rapid loss of adhesion corresponds well with the data where it was demonstrated that the studied epoxy coating only bonds through physisorptive hydrogen bonding, these bonds not being stable in the presence of water. After the initial loss the adhesion of the coating was however found to recover again and even exceeded the adhesion prior to exposure. The improvement could be ascribed to the growth of a thin oxyhydroxide layer on the aluminum substrate, which forms a new, water-stable and stronger bond with the epoxy coating. Two routes for improvement of adhesion are finally decribed including an interphasial polymeric thin layer and a treatment in boiling water of the substrate before coating takes place. The adhesion properties were finely also studied as a function of the Mg content of the alloys. It was shown that an enrichment of Mg in the oxide could take place when Mg containing alloys are heat-treated. It is expected that for these alloys the (hydr)oxide fraction also depends on the pre-treatment and on the distribution of magnesium as compared to the aluminium hydroxides, with a direct impact on adhesive properties.

• KSBB Journal
• /
• v.19 no.6 s.89
• /
• pp.437-440
• /
• 2004

To determine the inhibition of tyrosinase activity and melanogenesis, gardenia fruit was extracted initially with $95\%$ ethanol (w/v), The ethanol extract was fractionated subsequently with hexane, chloroform and ethyl acetate in that order. The inhibitory effect of the ethanol extract on tyrosinase activity was higher than water extract. When 10 mg/mL of ethyl acetate fraction was applied, the inhibition ratio of tyrosinase activity was much higher ($99.7{\pm}0.1\%$) than that of arbutin. The inhibition of melanogenesis using B16F10 melanoma cell, the ethanol extract also showed higher inhibitory effect than water extract. The highest inhibitory activity of melanogenesis was also shown in ethyl acetate fraction ($89.1{\pm}1.4\%$ at the cone. of $100\;{\mu}g/mL$). These results suggests that gardenia extracts might be used to be a potential agents for whitening.