• 한국포장학회지
• /
• 제12권2호
• /
• pp.117-123
• /
• 2006

유용한 생분해성 필름의 대량생산 시스템에 관한 기초 연구로 키토산과 젤라틴을 이용하여 solution casting 방법으로 비율에 따라 혼합레진을 제조한 후 이를 열 압축기(heat press)로 혼합필름을 제조하였다. 또한, 키토산/젤라틴 혼합필름의 인장강도, 신장률, 색도, 수분 및 산소투과도와 같은 물리적인 특성에 있어 혼합비율이 미치는 효과에 대하여 조사하였다. 혼합비율로 제조된 키토산/젤라틴 혼합필름의 인장강도는 43.43 MPa에서 38.30 MPa로 점차적으로 감소하는 경향을 나타내었고, 신장률은 9.02%에서 15.09%로 인장강도 결과와는 다르게 증가되는 경향을 보였다. 필름의 외관을 결정하는 중요한 특성인 색도측정 결과, L값의 경우 키토산 함량이 증가할수록 혼합필름의 L값은 감소되었고, b값은 L값에 반비례로 증가되었다. 또한, 키토산의 함량이 증가함에 따라 제조된 혼합필름의 ${\Delta}E$ 및 YI 값들은 키토산 함량 15%를 제외하고는 보다 높은 값들로 측정되었다. 수분투과도는 $0.9673mL{\cdot}mm/m^2{\cdot}s{\cdot}Pa$에서 $0.8420mL{\cdot}mm/m^2{\cdot}s{\cdot}Pa$로 측정되었고, 산소투과도는 혼합비율에 따라 $1.5472{\times}10^{-7}mL{\cdot}mm/m^2{\cdot}s{\cdot}Pa$에서 $1.5424{\times}10^{-7}mL{\cdot}mm/m^2{\cdot}s{\cdot}Pa$로 측정되었다. Duncan의 다중비교 분석결과로 키토산의 농도가 증가함에 따라 혼합필름의 수분 및 산소투과도는 유의적인(P < 0.05) 차이를 나타내지 않았다.

• 한국안전학회지
• /
• 제28권2호
• /
• pp.26-30
• /
• 2013

The purpose of this study is to find risk factors by analyzing the operation principle of a photo coupler (P/C) used to remove the noise of electronic devices and establish a base for the performance improvement of developed products. It was found from the P/C circuit analysis of normal products that they were equipped with an electrolytic condenser of $0.1{\mu}F$ to smooth system signals. Due to the epoxy resin packing the external part of the P/C, this study experienced a limit to visually examine the damage to it. It could be seen from the analysis of electric characteristics of the P/C that the forward voltage ($V_f$) and reverse current ($I_r$) were 1.3 V and 10 uA, respectively. In addition, it is required that the breakdown voltage (VCE) between the collector (C) and emitter (E) be maintained at less than 35 V. The and of the damaged product #1 were comparatively good. However, the measurement of was 100.0 uA. From this, it is thought that a short circuit occurred to the internal circuit. Moreover, from the fact that the of the damaged product #2 was open circuit and the measurement of was 0.0 uA, it is thought that the collector and emitter was separated or insulation resistance was significantly high. Furthermore, from the fact that the of the damaged product #3 was open circuit and the measurement of was 0.0 uA, it is thought that the space between the collector (C) and emitter (E) failed to meet the design standard or that they were separated. Therefore, it is thought that fabricating the P/C by increasing the reverse current 10 mA to 50 mA will prevent its malfunction.

• Nuclear Engineering and Technology
• /
• 제53권8호
• /
• pp.2477-2487
• /
• 2021

To improve safety analysis technology for a nuclear reactor containment considering an interaction between a reactor coolant system (RCS) and containment, this study aims at an experimental investigation on the integrated simulation of the RCS and containment, with an integral effect test facility, ATLAS-CUBE. For a realistic simulation of a pressure and temperature (P/T) transient, the containment simulation vessel was designed to preserve a volumetric scale equivalently to the RCS volume scale of ATLAS. Three test cases for a steam line break (SLB) transient were conducted with variation of the initial condition of the passive heat sink or the steam flow direction. The test results indicated a stratified behavior of the steam-gas mixture in the containment following a high-temperature steam injection in prior to the spray injection. The test case with a reduced heat transfer on the passive heat sink showed a faster increase of the P/T inside the containment. The effect of the steam flow direction was also investigated with respect to a multi-dimensional distribution of the local heat transfer on the passive heat sink. The integral effect test data obtained in this study will contribute to validating the evaluation methodology for mass and energy (M/E) and P/T transient of the containment.

• 대한전기학회논문지
• /
• 제40권1호
• /
• pp.1-9
• /
• 1991

This paper describes a new method of calculating expected energy generation and loss of load probability (L.O.L.P) for electric power system operation and expansion planning. The method represents an equivalent load duration curve (E.L.D.C) as a mixture of cumulants approximation (M.O.N.A). By regarding a load distribution as many normal distributions-rather than one normal distribution-and representing each of them in terms of Gram-Charlier expansion, we could improve the accuracy of results. We developed an algorithm which automatically determines the number of distribution and demarcation points. In modeling of a supply system, we made subsets of generators according to the number of generator outage: since the calculation of each subset's moment needs to be processed rapidly, we further developed specific recursive formulae. The method is applied to the test systems and the results are compared with those of cumulant, M.O.N.A. and Booth-Baleriaux method. It is verified that the M.O.C.A. method is faster and more accure than any other method.

• 한국산림과학회지
• /
• 제100권1호
• /
• pp.112-117
• /
• 2011

본 연구는 산불이 저서성대형무척추동물의 섭식기능군과 군집안정성에 미치는 영향을 파악하기 위해 실시 되었다. 산불이 발생한 울진군의 2개 수계를 실험수계 그리고 산불비발생지의 2개 수계를 대조수계로 설정하여 산불이 발생한 2007년부터 2009년까지 조사하였다. 조사결과, 대조수계에서 4문 6강 16목 47과 89종, 실험수계에서 4문 6강 16목 43과 84종이 출현하였다. 각 연도별 실험수계에서 조사된 청정수계지표종인 E.P.T 분류군의 종수 및 개체수의 경우, 2007년에는 하루살이목이 21종, $2,434.6inds./m^2$, 강도래목이 3종, $199.8inds./m^2$, 날도래목이 14종, $540.2inds./m^2$로 나타났으며, 2009년에는 하루살이목 9종, $296inds./m^2$, 날도래목 4종 $44.4inds./m^2$, 강도래목은 나타나지 않았다. 전체적으로 매년 E.P.T 분류군에 속하는 종수 및 개체수가 급감하는 것으로 나타났다. 또한 매년 대조수계에 비해 실험수계에서 다양도와 풍부도가 감소하는 경향을 보였다. 섭식기능군은 GC type은 종수 및 개체수가 매년 감소하는 경향을 나타내었으나 기타 type에는 큰 변화가 없었다. 군집안정성은 실험수계에서 I III구역에 해당하는 종이 가장 많이 출현하였으나, 산불 후 매년 I III구역의 종수가 대체적으로 감소하는 경향을 나타내었다.

• 소성∙가공
• /
• 제11권7호
• /
• pp.569-574
• /
• 2002

Recently, thick PZT films are required for the cases of micro piezoelectric devices with high driving force, high breakdown voltage and high sensitivity, and so on. In this work, thick PZT films were fabricated by Sol-Gel multi-coating method. Microstructures, and electrical properties of films were investigated by XRD, FESEM, impedance analyzer, and P-E hysteresis. PZT films with 2.7$mu extrm{m}$ to 4.4${\mu}{\textrm}{m}$ thickness were fabricated. Dielectric constant, loss, remnant polarization and coercive field of them were 880~1650 at 1kHz, 2~3% at 1kHz, 26~32 $\mu$C/$ extrm{cm}^2$, and 33~60kV/cm, respectively. Also a transverse piezoelectric coefficient $(e_{31,f})$ measurement system was fabricated and tested for thick film samples.

• Fisheries and Aquatic Sciences
• /
• 제1권2호
• /
• pp.242-249
• /
• 1998

The engineering aspect of water treatment processes in the recirculating aquaculture system was studied. To recycle the water in the aquaculture system, a wastewater treatment process was required to maintain high water quality for the growth and health of the cultured fish. In this study, three different biofilm processes were used to reduce the concentration of organic matters and ammonia from the recirculating water - two phase fluidized bed, three phase fluidized bed, and trickling filter. The objectives of this research were to evaluate the optimum treatment conditions of the biofilm processes for the recirculating aquaculture system, and thereby reduce the volume of biofilm processes, which are commonly used for the recycle water treatment processes for aquaculture. The result of this study showed that the removal efficiency of organic matters by trickling filter was found to be lower than that of the fluidized bed. In the trickling filter system, anthracite showed better organic removal efficiency than crushed stone as a media. In the two phase fluidized bed, the maximum removal efficiency of either organics or ammonia was obtained when both the packing rate of media was maintained to $40\%$ of total reactor depth excepting sediment zone and the bed expansion rate was maintained to $100\%$. When 100 tilapia (Oreochromis niloticus) of each average 200g was reared, the pollutant production rate was 0.07g $NH_4\;^+-N/kg$ fish/day and 0.06g P04-3-P/kg fish/day, and sludge production rate was 0.39 g SS/kg fish/day. In the two phase and three phase fluidized bed, the volume of water treatment tank could be calculated from an empirical equation by using the relationship between the influent COD to $NH_4\;^+-N$ ratio (C/N, -), media concentration (Cm, g/L), influent ammonia nitrogen concentration (Ni, mg/L), effluent ammonia nitrogen concentration (Ne, mg/L), bed expansion rate $(E,\;\%)$, and influent flowrate $(Q,\;m^3/hr)$. The empirical equation from this study is $$V_2\;=\;10^{3.1279}\;C/N^{3.5461}\;C_m\;^{-3.7473}\;N_i\;^{4.6477}\;E^{0.0326}\;N_e\;^{-0..8849}\;Q\;(Two\;Phase\;FB) V_3\;=\;10^{11.7507}\;C/N^{-1.2330}\;C_m\;^{-6.5715}\;N_i\;^{1.5091}\;N_e\;^{-1.8489}\;Q (Three\;Phase\;FB)$$

• Journal of the Korean Wood Science and Technology
• /
• 제34권5호
• /
• pp.42-51
• /
• 2006

The this study, the effect of rice husk flour (RHF) as scavenger on formaldehyde emission rate and formaldehyde content from urea-formaldehyde (UF) resin bonded RHF content wood particleboards (PB). Two type of particle size ($30{\mu}m$ and $300{\mu}m$) of RHF was premixed with the UF resin at 5% and 15% by weight. The performance of UF resins is greatly influenced by the curing characteristics in their curing processing. The curing behavior was monitored activation energy ($E_a$) by DSC and pH variation according to RHF contents. PB with dimensions of $27cm{\times}27cm{\times}0.7cm$ was prepared at a specific gravity of 0.75 using $E_1$ and $E_2$ class UF resins. Formaldehyde emission and formaldehyde content from RHF filled PB bonded with UF resin was measured by 24 h desiccator and perforator method, respectively. RHF causes an increased pH of UF resin. $E_a$ of the modified UF resin decreased independently of RHF particle size. As the pH and the $E_a$ variation of the UF resin containing RHF increased, the amount of formaldehyde content decreased. The formaldehyde emission and formaldehyde content levels of the PB bonded with 15 wt% of $30{\mu}m$ RHF and $E_2$ type UF resin were low and satisfied grade $E_1$, as measured by 24 h desiccator and perforator method. The result of a comparison between 24 h desiccator and perforator test using PB showed that the linear regression analyses show a good correlation between the results for the 24 h desiccator and the perforator tests. The linear regression of a correlation between the desiccator and the perforator was Y=4.842X-0.064 ($R^2=0.989$). RHF was effective at reducing formaldehyde emission and formaldehyde content in urea-formaldehyde adhesives when used as scavenger.

• 미생물학회지
• /
• 제41권2호
• /
• pp.140-145
• /
• 2005

상업적으로 중요한 macrolide계 항진균 학생물질인 natamycin을 생산하는 Streptomyces natalensis ATCC27448의 환자 유전학적인 연구를 위해 대장균으로부터 S. natalensis로 plasmid DNA를 직접 도입하는 형질전환법을 확립하였다. 이러한 S. natalensis의 형질전환은 oriT와 attP 단편을 가지고 있는, ${\Phi}C31$ 유래의 integration 벡터인 pSET152를 이용하여 Escherichia coli ET12567/pUZ28002을 DNA 공여체(donor)로 이용한 접합전달법(conjugal transfer)을 사용하여 확립하였다. 접합전달의 가장 높은 효율은 10 mM의 $MgCl_2$를 포함한 MS 배지에서, $6.25\times10^8$의 E. coli 공여체와 열처리를 하지 않은 S. natalensis의 포자를 사용하여 얻어졌다. 또 얻어진 접합전달체 (exconjugant)에 대하여 southern blot hybridization과 벡터가 삽입된 염색체부분의 염기서열분석을 통해 attB site와 pseudo-attB site를 확인하다. attB site의 경우에는 다른 방선균들처럼 S. natalensis 염색체의 pirin 상동체를 코드하는 ORF내에 존재하였으나 pseudo-attB site는 염색체내 다른 site (GenBank accession no. $YP\_117731$)에 존재하였고 그 염기서열은 attB 염기서열과 차이를 나타내었다.

• Journal of Microbiology and Biotechnology
• /
• 제10권4호
• /
• pp.535-538
• /
• 2000

Streptomyces lavendulae FRI-5 produces the ${\gamma}$-butyrolactone autoregulator IM-2, which is required for nucleoside antibiotic producetion. We have developed a system for introducing DNA into S. lavendule FRI-5 via conjugal transfer from Esherichia cole. Conditions were established for conjugation of the oriT-and attP-containing plasmid pSET152 from E. coli ET12567 (pUZ8002) to FRI-5. Conjugation resulted in integration of the plasmid at the chromosomal C31 attB site. The frequency of intergeneric conjugation varied with the medium used. The highest frequency ($1.6\times10-5$ per recipient) was obtained on ISP medium 2 containing 10mM MgCl2. Southern blot and phenotypic analyses of exconjugants revealed that S. lavendulae FRI-5 contains a unique C31 attB site, and that integration of heterologous DNA into the attB site did not interfere with morphological differentiation or IM-2-dependent signal transduction, including the production of a blue pigment. This system will now enable detailed genetic analysis of the regulation of antibiotic production in S. lavendulae FRI-5.