• Restorative Dentistry and Endodontics
• /
• v.26 no.4
• /
• pp.263-272
• /
• 2001

The aim of this study was to investigate the influence of four different light curing modes on the marginal leakage of Class V composite resin restoration. Eighty extracted human premolars were used. Wedge-shaped class Y cavities were prepared on the buccal surface of the tooth with high-speed diamond bur without bevel. The cavities were positioned half of the cavity above and half beyond the cemento-enamel junction. The depth, height, and width of the cavity were 2 mm, 3 mm and 2 mm respectively. The specimens were divided into 4 groups of 20 teeth each. All the specimen cavities were treated with Prime & Bond$^{R}$ NT dental adhesive system (Dentsply DeTrey GmbH, Germany) according to the manufacturer's instructions and cured for 10 seconds except group VI which were cured for 3 seconds. All the cavities were restored with resin composite Spectrum$^{TM}$ TPH A2 (Dentsply DeTrey GmbH, Germany) in a bulk. Resin composites were light-cured under 4 different modes. A regular intensity group (600 mW/${cm}^2$, group I) was irradiated for 30 s, a low intensity group (300 mW/${cm}^2$, group II) for 60 s and a ultra-high intensity group (1930 mW/${cm}^2$, group IV) for 3 s. A pulse-delay group (group III) was irradiated with 400 mW/${cm}^2$ for 2 s followed by 800 mW/${cm}^2$ for 10 s after 5 minutes delay. The Spectrum$^{TM}$ 800 (Dentsply DeTrey GmbH, Germany) light-curing units were used for groups I, II and III and Apollo 95E (DMD, U.S.A.) was used for group IV. The composite resin specimens were finished and polished immediately after light curing except group III which were finished and polished during delaying time. Specimens were stored in a physiologic saline solution at 37$^{\circ}C$ for 24 hours. After thermocycling (500$\times$, 5-55$^{\circ}C$), all teeth were covered with nail varnish up to 0.5 mm from the margins of the restorations, immersed in 37$^{\circ}C$, 2% methylene blue solution for 24 hours, and rinsed with tap water for 24 hours. After embedding in clear resin, the specimens were sectioned with a water-cooled diamond saw (Isomet$^{TM}$, Buehler Co., Lake Bluff, IL, U.S.A.) along the longitudinal axis of the tooth so as to pass the center of the restorations. The cut surfaces were examined under a stereomicroscope (SZ-PT Olympus, Japan) at ${\times}$25 magnification, and the images were captured with a CCD camera (GP-KR222, Panasonic, Japan) and stored in a computer with Studio Grabber program. Dye penetration depth at the restoration/dentin and the restoration/enamel interfaces was measured as a rate of the entire depth of the restoration using a software (Scion image, Scion Corp., U.S.A.) The data were analysed statistically using One-way ANOVA and Tukey's method. The results were as follows : 1. Pulse-Delay group did not show any significant difference in dye penetration rate from other groups at enamel and dentin margins (p>0.05) 2. At dentin margin, ultra-high intensity group showed significantly higher dye penetration rate than both regular intensity group and low intensity group (p<0.05). 3. At enamel margin, there were no statistically significant difference among four groups (p>0.05). 4. Dentin margin showed significantly higher dye penetration rate than enamel margin in all groups (p<0.05).

• Explosives and Blasting
• /
• v.32 no.2
• /
• pp.16-24
• /
• 2014

In this "Wonju~Jaecheon double-lanes railroad" project, a highway is located at about 13meter above a tunnel. Initially, rock-splitting method was used for the tunnel excavation in order to minimize the possible damage on the highway. The method, however, takes a long time for the tunnel excavation and that may cause other problems like large displacement of tunnel and subsidence of highway ground before the tunnel can be stabilized by supporters. Therefore, the application of electronic blasting method(eDdevII) was recommended to control the blast vibration below 1.0cm/sec as well as to prevent the subsidence of highway ground. The analysis of the influence of tunnel excavation on the highway showed that electric blasting method is permissible for the safe management of the highway. Based on that, the tunnel construction under a highway could be carried out quickly and safely without any damages on the highway.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.39 no.7
• /
• pp.665-671
• /
• 2015

The performance of fault diagnostics for a planetary gearbox depends on vibration modulation characteristics, which can vary with manufacturing & assembly tolerance, and load condition. In this paper, a fault diagnostics technique that considers vibration modulation characteristics is proposed for the effective fault detection of planetary gearboxes in wind turbines. For identifying the vibration modulation characteristics in practice, re-sampled vibration signals are processed with narrow band-pass filters. Thereafter, the optimal position of the vibration extraction window is identified for effective detection of faulty signals under the varying vibration modulation characteristics. The proposed diagnostics technique makes it possible to perform robust diagnostics of the planetary gearbox with regard to the changeable vibration modulation effect. For demonstrating the proposed fault diagnostics technique, a 2-kW WT testbed is designed with two DC motors and gearboxes. A faulty gear with partial tooth breakage is machined and assembled into the gearbox.

• Asian-Australasian Journal of Animal Sciences
• /
• v.13 no.6
• /
• pp.830-836
• /
• 2000

A participation scheme involving smallholder dairy farmers in improving dairy productivity through the use of local feeds, on-farm established feeds and crop residues was carried out in the Northeast, Thailand. At six milk collection centers, 63 farmers with 340 lactating cows participated in this research and demonstration of feed supplements. Farmers and cows were allotted to receive respective feed supplements: high-quality feed block (HQFB), high-quality feed pellet (HQFP), dried cassava leaf/cassava hay, dried leucaena leaf and cottonseed meal: 5% urea treated rice straw was fed as a source of roughage throughout the feeding period of the dry season. Trainings and workshops were organized by the researchers at the University, research station, demonstration sites and on-farms. Regular visits to the fartns by researchers and extension officers were made while discussions and demonstrations were performed in addition. Participating farmers also visited other farmers during the demonstration which offered a real practical perspective and farmer-to-farmer interaction. As a result of this participation and demonstration scheme, the farmers could learn more effectively and accepted the technology more readily, especially the practicality of the feed preparation, feed establishment, feeding method and feed reserve. Strategic supplementation of these feed supplements resulted in improving milk yield, milk quality, overall condition of the cows and higher income return through increased productivity and lower level use of concentrate to milk yield from 1:2 to 1:3 or lower. Based on this research and demonstration /participation scheme, all feed supplements enhanced productivity, however the establishment of cassava hay on fartns deserved more attention and warrants a wider developmental expansion among dairy farmers since it contained high rumen by-pass protein (tannin-protein complex) and could be easily produced and be sustainable on farms.

• Electrical & Electronic Materials
• /
• v.10 no.5
• /
• pp.467-472
• /
• 1997

In this study, we investigated the thickness dependence of thermal bleaching(TB) effect as well as photo-induced scalar phenomena, such as photodrakening(PD) effect and photorefraction(PR) change, in chalcogenide A $s_{40}$ G $e_{10}$S $e_{15}$ $S_{35}$ thin films. We found that when these films were exposed for 15 minutes using blue-pass filtered Hg lamp(~4300$\AA$) after annealing for 30 minutes around the glass transition temperature Tg(20$0^{\circ}C$), the refractive index change ($\Delta$n) was varied up to 0.02~0.46 according to each thickness condition and the optical energy gap ($\Delta$ $E_{op}$ ) was shifted to a longer wavelength of approximately 0.67eV, especially for 1000$\AA$-thickness. Also, the TB PD effects have been understood by the results related to optical absorption characteristics. The TB effect could be estimated as increasing the stabilization of amorphous chalcogenide films since absorption slope of extended regions(U) was not changed by annealing. On the other hand, the PD effect could be understood as due to the enhancement of disorder since U and the slope of Urbachs tail(1/F) around an absorption edge were decreased by exposing.ing.n edge were decreased by exposing.

• Journal of Preventive Medicine and Public Health
• /
• v.32 no.4
• /
• pp.459-466
• /
• 1999

Objectives:eurotoxicity is mediated by nitric oxide(NO) in the rat primary neuronal cultures and assess the effect of $Mn^{2+}$ on the N-methyl-D aspartate(NMDA) receptors. Methods: We have used 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT)assay to examine the effect of cytotoxicity of $MnCl_2$ in neuronal cells , NO production was determined by measuring nirites, a stable oxidation product of NO. The neurons in the rat that contains neuronal nitric oxide synthase(nNOS) were examined by immunofluorescence and confocal microscopy. The effects of $Mn^{2+}$ on the NMDA receptors was assesed by the whole cell voltage clamp technique. Results: We showed that the NO release and NOS expression was increased with 500uM $MnCl_2$ treatment and an NOS inhibitors, $N^G-nitro-L-arginine$, prevented neurotoxicity elicited by manganese. In the electrophysiological study, $Mn^{2+}$ does not block or activate the NMDA receptors and not pass through the NMDA receptors in a neurons of basal ganglia. Conclusions: It is concluded that manganese neurotoxicity in basal ganglia was partially mediated by nitric oxide in the cell culture model.

• Proceedings of the Korean Society of Near Infrared Spectroscopy Conference
• /
• 2001.06a
• /
• pp.1622-1622
• /
• 2001

The purpose of this research was to develop a the reflection technique with near infrared (NIR) radiation for estimating physico-chemical properties in compost. The composts (cattle, pig, chicken and waste composts) were air dried and then ground to pass through a 0.5 or 2mm sieve for the physico-chemical properties and spectroscopic determinations. The physico-chemical properties of compost were shown high values ; moisture(30-60%), T-N(0.8-2.9%), organic matter(29-89%), pH(5.89-9.60) K$_2$O(0.27-5.66%), P2O$\sub$5/(0.07-2.62%), CaO(0.03-4.80%), MgO(0.09-1.56%), NaCl(0.01-1.13%), EC(1.41-13.76dS/m). Generally, we should select a simple calibration and prediction method for determining physico-chemical properties in compost under similar accuracy and precision of prediction. It should be remembered that the NIRS approach will never replace the traditional methods. However, NIRS technique may be an effective method for rapid and nondestructive measurements of a large number of compost samples. Near infrared reflectance spectra of composts was obtained by Infra Alyzer 500 scanning spectrophotometer at 2-nm intervals from 1100 to 2500nm. Multiple linear regression(MLR) or partial least square regression (PLSR) was used to evaluate a NIRS method for the rapid and nondestructive determination of physico-chemical properties and humic acid contents in composts. The standard error of prediction(SEP) for finely sized sample(<0.5mm) and coarsely sized sample(<2mm) did not show much difference. The NIR instrument of filter type showed the same accuracy of the monochromator scanning type to estimate the compost properties. The results summarized that NIR spectroscopy can be used as a routine testing method to determine quantitatively the OM, moisture, T-N, color, pH, cation content in the compost samples nondestructively.

• Korean Journal of Materials Research
• /
• v.16 no.3
• /
• pp.188-192
• /
• 2006

The microstructures and mechanical properties of continuously porous $SiC-Si_3N_4$composites fabricated by multi-pass extrusion were investigated at different Si levels added. Si-powder with different weight percentages (0%, 5%, 10%, 15%, 20%) was added to the SiC powder to make the raw mixture powders, with $6wt%Y_2O_3-2wt%Al_2O_3$ as sintering additives, carbon ($10-15{\mu}m$) as a pore-forming agent, ethylene vinyl acetate as a binder and stearic acid ($CH_3(CH_2)_{16}COOH$) as a lubricant. In the continuously porous $SiC-Si_3N_4$ composites, $Si_3N_4$ whiskers like the hairs of nostrils were frequently observed on the wall of the pores. In this study, the morphology of the $Si_3N_4$ whiskers was investigated with the silicon addition content. In the composites containing of 10 wt% Si, a large number of $Si_3N_4$ whiskers was found at the continuous pore regions. In the sample to which 15 wt% Si powder was added, maximum values of about 101 MPa bending strength and 57.5% relative density were obtained.

• Biomolecules & Therapeutics
• /
• v.19 no.3
• /
• pp.364-370
• /
• 2011

The purpose of this study was to investigate the effects of curcumin on the pharmacokinetics of loratadine in rats. The effect of curcumin on P-glycoprotein (P-gp) and cytochrome P450 (CYP) 3A4 activity was evaluated. Pharmacokinetic parameters of loratadine were also determined after oral and intravenous administration in the presence or absence of curcumin. Curcumin inhibited CYP3A4 activity with an IC50 value of 2.71 ${\mu}M$ and the relative cellular uptake of rhodamine-123 was comparable. Compared to the oral control group, curcumin significantly increased the area under the plasma concentration-time curve and the peak plasma concentration by 39.4-66.7% and 34.2-61.5%. Curcumin also significantly increased the absolute bioavailability of loratadine by 40.0-66.1% compared to the oral control group. Consequently, the relative bioavailability of loratadine was increased by 1.39- to 1.67-fold. In contrast, curcumin had no effect on any pharmacokinetic parameters of loratadine given intravenously, implying that the enhanced oral bioavailability may be mainly due to increased intestinal absorption caused via P-gp and CYP3A4 inhibition by curcumin rather than to reduced renal and hepatic elimination of loratadine. Curcumin enhanced the oral bioavailability of loratadine in this study. The enhanced bioavailability of loratadine might be mainly attributed to enhanced absorption in the gastrointestinal tract via the inhibition of P-gp and reduced fi rst-pass metabolism of loratadine via the inhibition of the CYP3A subfamily in the small intestine and/or in the liver by curcumin.

• Journal of Pharmaceutical Investigation
• /
• v.41 no.5
• /
• pp.273-278
• /
• 2011

The aim of this study was to investigate the effect of efonidipine on the pharmacokinetics of warfarin after oral and intravenous administration of warfarin in rats. Warfarin was administered orally (0.2 mg/kg) or intravenously (0.05 mg/kg) without or with oral administration of efonidipine (1 or 3 mg/kg) in rats. The effect of efonidipine on the cytochrome P450 (CYP) 3A4 activity was also evaluated. Efonidipine inhibited CYP3A4 enzyme activity with 50% inhibition concentration ($IC_{50}$) of $0.08{\mu}M$. Compared to those in the oral control group (warfarin without efonidipine), the area under the plasma concentration-time curve (AUC) of warfarin was significantly greater (1 mg/kg, P<0.05; 3 mg/kg, P<0.01) by 25.9-59.0%, and the peak plasma concentration ($C_{max}$) was significantly higher (3 mg/kg, P<0.05) by 26.2% after oral administration of warfarin with efonidipine, respectively. The total body clearance of warfarin was significantly (3 mg/kg, P<0.05) decreased by efonidifine. Consequently, the relative bioavailability of warfarin was increased by 1.26- to 1.59-fold and the absolute bioavailability of warfarin with efonidipine was significantly greater by 59.7-75.4 % compared to that in the control group (47.4%). In contrast, efonidipine had no effect on any pharmacokinetic parameters of warfarin given intravenously. Therefore, the enhanced oral bioavailability of warfarin may be due to inhibition of CYP 3A4-mediated metabolism in the intestine and/or liver and to reduction of total body celarance rather than renal elimination, resulting in reducing first-pass metabolism by efonidipine.