• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.6 no.3
• /
• pp.405-409
• /
• 2002

Recently, the FCC commissioners approved limited uses of UWB, and have promised to review the standards to explore the potential of more flexible standards and to address the operation of additional types of UWB operations and technology. In this paper we study performances of UWB communication system according to M-ary schemes with BCH code. And under the AWGN channel, we analysis and compare error probability, the number of M-ary schemes to the two methods that pulse position modulation and pulse amplitude modulation.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.53 no.6
• /
• pp.129-136
• /
• 2011

To measure effects of surface cover on runoff and sediment discharge reduction using rainfall simulator, four(5 m${\times}$30 m scale) plot experiments were conducted in this study. Surface covers made with straw mat, Polyacrylamide (PAM), chaff, and sawdust were simulated 4 times under 31.1~44.4 mm/hr rainfall intensities. Compared with results from control plot, the time of runoff generation is delayed and outflow volume decreased with surface cover. Effects on runoff reduction of straw mat, PAM, sawdust and chaff ranged 4.7~81.5 % and runoff rate reduced by 6.5~76.1 % respectively, when compared with those from control plot. The percentage of decrease in sediment discharge were 99.7~99.8 % from straw mat+sawdust+PAM plots, 85.9~95.6 % from straw mat+PAM plots, and 98.5~99.4 % from straw mat+chaff+PAM plots. The runoff, sediment discharge, and SS concentration reduction efficiencies of the cover materials were outstanding when compared to control plot. It was analyzed that reduction of runoff and sediment discharge were mainly contributed by decrease in rainfall energy impact and flow velocity and increase of infiltration due to the surface cover materials. The results could be used as a base for the development of best management practices (BMPs) to reduce runoff, sediment discharge from sloping field.

• Polymer(Korea)
• /
• v.24 no.5
• /
• pp.629-637
• /
• 2000

Dispersion polymerization of acrylamide in the media of t-butyl alcoho1/$H_2O$ mixtures at 30~5$0^{\circ}C$ in the presence of hydroxypropyl cellulose and ammonium persulfate as steric stabilizer and initiator, respectively, was carried out. It was studied the effects of concentrations of initiator and steric stabilizer, amount of monomer, polymerization temperature, t-butyl alcohol/$H_2O$ ratio, concentration of crosslinker, purification of monomer and nitrogen purge on the particle size of the resulting acrylamide latices and molecular weight of the latex-poly(acrylamide). In this study, poly(acrylamide) latices of 0.1~0.5 ${\mu}{\textrm}{m}$ with 470000~2080000 in (equation omitted) were prepared and the resulting PAM latices were all dissolved in water in stantly.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.11A
• /
• pp.1053-1062
• /
• 2008

This paper provides a general and compact expression for the probability density function (pdf) and the moment-generating function (MGF) of the maximal ratio combiner output over Rayleigh fading channels. It is then used to derive closed form expression bit error rate (BER) for M-PSK, M-PAM and M-QAM, respectively. A variety of simulations is performed and shows that they match exactly with analytic ones.

• Journal of Communications and Networks
• /
• v.11 no.5
• /
• pp.480-488
• /
• 2009

Cooperative transmission is an effective solution to improve the performance of wireless communications over fading channels without the need for physical co-located antenna arrays. In this paper, selection combining is used at the destination instead of maximal ratio combing to optimize the structure of destination and to reduce power consumption in selective decode-and-forward relaying networks. For an arbitrary number of relays, an exact and closed-form expression of the bit error rate (BER) is derived for M-PAM, M-QAM, and M-PSK, respectively, in both independent identically distributed and independent but not identically distributed Rayleigh fading channels. A variety of simulations are performed and show that they match exactly with analytic ones. In addition, our results show that the optimum number of relays depend not only on channel conditions (operating SNRs) but also on modulation schemes which to be used.

• Proceedings of the Korea Institute of Applied Superconductivity and Cryogenics Conference
• /
• 2003.10a
• /
• pp.55-58
• /
• 2003

We fabricated the textured Ni substrate and evaluated the effects of processing variables on microstructural evolution and texture transformation. Ni-rods as an initial specimen were prepared by two different methods, i.e., powder metallurgy(P/M) and plasma arc melting(PAM) The texture of the substrate was characterized by pole-figure and surface condition was evaluated by atomic force microscopy. It was observed that the texture of substrate made by P/M did not significantly varied with annealing temperature of 800~120$0^{\circ}C$ and the full-width at half-maximums (FWHM) of both in-plane and out-of-plane were 9$^{\circ}$~10$^{\circ}$. On the other hand, the texture of substrate made by PAM was more dependent on the annealing temperature and the FWHMs of in-plane texture was 9$^{\circ}$~13$^{\circ}$ at the temperature range. In addition, twin texture, (221)＜221＞, was formed as the temperature increased further. The grain size of substrate made by P/M was smaller than that made by PAM and this difference was correlated to the microstructure of initial specimens.

• Progress in Superconductivity
• /
• v.5 no.1
• /
• pp.70-74
• /
• 2003

We fabricated cube textured Ni substrate for YBCO coated conductor and evaluated the effects of processing parameters on microstructural evolution and texture formation. Ni-rods as an initial specimen were prepared by two different methods, i.e., powder metallurgy(PM) and plasma arc melting(PAM). Subsequently, the rods were cold rolled to 100 $\mu\textrm{m}$ thick substrate and annealed at temperatures of $700∼1200^{\circ}C$. The texture of the substrate was characterized by pole-figure. It was observed that the texture of substrate made by P/M did not significantly varied with annealing temperature of 600∼$l100^{\circ}C$ and the full-width at half-maximums (FWHM) of both in-plane and out-of-plane were 9$^{\circ}$∼$10^{\circ}$. On the other hand, the texture of substrate made by PAM was more dependent on the annealing temperature and the corresponding values were $9^{\circ}$ ∼$13^{\circ}$ at the temperature range. In addition, recrystallization twin texture, (221)＜221＞, was formed as the temperature increased further. OM profiles showed that the grain size of substrate made by P/M was smaller than that made by PAM and this difference was correlated to the microstructure of initial specimens.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2011.05a
• /
• pp.336-336
• /
• 2011

본 연구에서는 강우시 경사지 밭에서 발생하는 토양유실량을 저감하기 위하여 지표피복재의 유무와 강우강도를 달리하여 실외인공강우 실험을 통하여 평가하였다. 인공강우 실험은 경사도 28%와 각 시험포는 $5\times30m$의 크기로 strawmat+PAM+sawdust, control(bare), strawmat+PAM, strawmat+PAM+rice husks를 4개 조성하고, 각 시험포는 하단부에 강우유출수를 채취할 수 있는 설비(flume)를 설치하였다. 대조구 실험을 위하여 각 시험포에서 발생하는 직접유출량과 유사량을 비교 분석하였다. 시험포의 토양은 양질사토로 일반 고랭지 밭의 흙과 동일한 성질을 가지고 있는 토양을 사용하였고, 지표 피복처리는 straw mat, saw dust, rice husk 그리고 PAM 등 4개의 재료를 사용하였다. 인공강우 실험은 1차 10월 18일, 2차 10월 24일, 3차 10월 30일, 4차 11월 7일로 총 21일간 각각 약 1주일의 간격을 두고 실시하였으며 인공강우 시험기의 강우강도는 각 31.1 ~ 44.4 mm/hr로 모의하였다. 연구결과 시험포에서 발생한 유출량은 지표피복을 하지 않은 대조구 시험포보다 지표를 피복한 시험포에서 약 15.7 ~ 19%의 감소한 것으로 나타났다. 유사량은 대조구 시험포보다 약 93.1 ~ 99.3% 감소한 것으로 나타났으며, 유출량과 유사량은 straw mat+PAM+sawdust와 straw mat+PAM+rice husk를 적용한 시험포에서 저감효과가 큰 것으로 나타났다. 이와 같이 지표피복처리는 강우가 발생하였을 때 강우타격력의 감소와 유출수의 유속감소 그리고 침투능을 증가하는 역할을 하여 경사지, 농경지 및 공사현장에서 토양 유실을 저감하며, 하천이나 강으로 유입되는 탁수량의 저감에 큰 효과가 있을 것으로 판단된다.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.55 no.4
• /
• pp.21-28
• /
• 2013

The objective of the study was to investigate the effect of rice straw mat, rice straw mat with PAM (Polyacrylamide) and gypsum addition on surface runoff and sediment discharge in field. Six experimental plots of $5{\times}22m$ in size and 3 % in slope prepared on gravelly sandy loam soil were treated with control, rice straw mat cover with gypsum and rice straw mat cover with gypsum and PAM. Radish in Spring and Chinese cabbage in autumn growing seasons were cultivated. Non point source (NPS) pollution discharge was monitored and compared among the treatments. Rainfall of the 10 monitored events ranged from 17.0 mm to 93.5 mm. Runoff coefficient of the events was 0.005~0.239 in control plot, 0~0.176 in rice straw plot with gypsum and 0~0.046 in rice straw mat plot with gypsum and PAM. When compared to the control plot, the runoff amount was reduced by 10.4~100 % (Ave. 60.8) in rice straw plot with gypsum and 80.7~100 % (Ave. 96.7 %) in rice straw mat plot with gypsum and PAM. The reduction of NPS pollution load was 54.6 % for BOD5, 71.5 % for SS, 41.6 % for TN and 61.4 % for T-P in rice straw with gypsum plot and 91.9 % for BOD5, 92.0 % for SS, 88.0 % for TN and 88.5 % for T-P in rice straw mat with gypsum and PAM plot. This research revealed that rice straw mat cover with soil amendments on the soil surface could not only increase the crop yield but also reduce the NPS pollution loads substantially.

• IMMUNE NETWORK
• /
• v.12 no.1
• /
• pp.27-32
• /
• 2012

Background: Toll-like receptors (TLRs) have been extensively studied in recent years. However, functions of these molecules in murine B cell biology are largely unknown. A TLR4 stimulant, LPS is well known as a powerful polyclonal activator for murine B cells. Methods: In this study, we explored the effect of a murine TLR9 stimulant, M6-395 (a synthetic CpG ODNs) on B cell proliferation and Ig production. Results: First, M6-395 was much more potent than LPS in augmenting B cell proliferation. As for Ig expression, M6-395 facilitated the expression of both TGF-${\beta}1$-induced germ line transcript ${\alpha}$ ($GLT{\alpha}$) and IL-4-induced $GLT{\gamma}1$ as levels as those by LPS and Pam3CSK4 (TLR1/2 agonist) : a certain Ig GLT expression is regarded as an indicative of the corresponding isotype switching recombination. However, IgA and IgG1 secretion patterns were quite different--these Ig isotype secretions by M6-395 were much less than those by LPS and Pam3CSK4. Moreover, the increase of IgA and IgG1 production by LPS and Pam3CSK4 was virtually abrogated by M6-395. The same was true for the secretion of IgG3. We found that this unexpected phenomena provoked by M6-395 is attributed, at least in part, to its excessive mitogenic nature. Conclusion: Taken together, these results suggest that M6-395 can act as a murine polyclonal activator but its strong mitogenic activity is unfavorable to Ig isotype switching.