• Journal of the Korean Society for Marine Environment & Energy
• /
• v.18 no.2
• /
• pp.64-73
• /
• 2015

The distributions of Pb and Cd concentrations in the surface seawater of the East Sea were investigated during the R/V Lavrentyev cruise (July 2009) in which four transects from Russia shore to South were conducted to collect 26 surface water samples. The total dissolved concentrations of Pb and Cd were measured using ICP-MS (Perkin Elmer, DRC-e). In the coastal area, their concentrations of Russia shore (Pb, 0.08; Cd, 0.10 nM) were comparable for Cd but on the other hand, 6 times lower for Pb than Korea shore (Pb, 0.49; Cd, 0.11 nM). In the subregion, their concentrations of Warm region (Pb, 0.22; Cd, 0.01 nM) were about 1.7 times higher for Pb but 0.4 lower for Cd than Cold region (Pb, 0.13; Cd, 0.14 nM). The distributions of Pb and Cd concentrations were divided by lowest level at $10^{\circ}C$ of water temperature. Below $10^{\circ}C$, Pb and Cd concentrations increased when surface water temperatures decreased. Above $10^{\circ}C$, their concentrations increased with temperature, which showed highest concentrations in the Ulleung basin, directly influenced by flux from East Korean Warm Current and neighboring countrys (Korea and Japan). Specially, in the case of Pb, the concentrations decrease remarkablely with temperatures decrease from D10 directly influenced by flux from East Korean Warm Current, which shows highest Pb level. By comparing with other sea areas (Western Mediterranean, East Pacific), Pb concentrations in the East Sea were a little higher. The influence of East Korean Warm Current and neighboring countrys (Korea and Japan) may be relatively important. Therefore, the distribution of Cd may primarily be influenced by mixing of different water masses while the distribution of Pb may mainly be influenced by flux from East Korean Warm Current and atmospheric inputs. River inputs and interaction with particulate materials may also some roles for the distribution of these elements.

• Economic and Environmental Geology
• /
• v.46 no.3
• /
• pp.221-234
• /
• 2013

Laboratory experiments for the reaction with supercritical $CO_2$ under the $CO_2$ sequestration condition were performed to investigate the mineralogical and geochemical weathering process of the sandstones and mudstones in the Pohang basin. To simulate the supercritical $CO_2$-rock-groundwater reaction, rock samples used in the experiment were pulverized and the high pressurized cell (200 ml of capacity) was filled with 100 ml of groundwater and 30 g of powdered rock samples. The void space of the high pressurized cell was saturated with the supercritical $CO_2$ and maintained at 100 bar and $50^{\circ}C$ for 60 days. The changes of mineralogical and geochemical properties of rocks were measured by using XRD (X-Ray Diffractometer) and BET (Brunauer-Emmett-Teller). Concentrations of dissolved cations in groundwater were also measured for 60 days of the supercritical $CO_2$-rock-groundwater reaction. Results of XRD analyses indicated that the proportion of plagioclase and K-feldspar in the sandstone decreased and the proportion of illite, pyrite and smectite increased during the reaction. In the case of mudstone, the proportion of illite and kaolinite and cabonate-fluorapatite increased during the reaction. Concentration of $Ca^{2+}$ and $Na^+$ dissolved in groundwater increased during the reaction, suggesting that calcite and feldspars of the sandstone and mudstone would be significantly dissolved when it contacts with supercritical $CO_2$ and groundwater at $CO_2$ sequestration sites in Pohang basin. The average specific surface area of sandstone and mudstone using BET analysis increased from $27.3m^2/g$ and $19.6m^2/g$ to $28.6m^2/g$ and $26.6m^2/g$, respectively, and the average size of micro scale void spaces for the sandstone and mudstone decreased over 60 days reaction, resulting in the increase of micro pore spaces of rocks by the dissolution. Results suggested that the injection of supercritical $CO_2$ in Pohang basin would affect the physical property change of rocks and also $CO_2$ storage capacity in Pohang basin.

• Journal of the Korean Electrochemical Society
• /
• v.18 no.1
• /
• pp.17-23
• /
• 2015

$Li_4Ti_5O_{12}$ (LTO) have attracted much attention of researchers in the field of energy storage, because of their excellent stability for electric vehicle application. A main drawback of LTO is however their insulating nature due to the wide bandgap, which should be addressed to enhance the battery performance. In this study, we investigated the effect of water solubility of dopant precursor on the electrochemical characteristics of conducting LTO prepared by doping with $Cr^{3+}$ ions with the well-known wet-mixing method. The solubility of dopant precursor directly affected the morphology and the phase of doped LTO, and therefore their battery performance. In the case of employing the most soluble dopant precursor, $Cr(NO_3)_2$, the doped LTO demonstrated a markedly enhanced discharge capacity at high C-rate (130mAh/g @ 10C), which is about 2 times higher value than that of bare LTO.

• Journal of the East Asian Society of Dietary Life
• /
• v.7 no.4
• /
• pp.512-518
• /
• 1997

This study was performed to determine the amount of aluminum, which is one of the factors of Alzheimer's disease, In some fishes caught from some areas of the west coast in Korea. The 46 aquatic products were composed of fishes, molluscs, and salt-fermented products (jeot-gal). The 24 fishes were Hickory shad, Gobies, Pomfref, Atkafish, Flounder, Jambeng-ie Monk fish, Yellow hair tail, Mackerel, Bartailed flathead, Alaska pollack, Brown croaker, Eel, Fine-spotted flounder, Black spotted grouper, Sea-eel, Pacific saury, Areliscus honaleus, Small boil-dried anchovy, Croaker, Hair tail, Sea bream genuine, Motleystrip rainbowfish, and Bastard halibut. The 15 Molluscs were Whip-arm octopus, Sea arrow, Common squid, Han chi, Cuttle fish, Turban shell, Pond snail, Orient calm, Surf calm, Butter calm, Crib shell, Oyster, Egg cockle, Little neck calm, and Arkshell. The 7 salt-fermented products were salt-fermented Shrimp, Little neck, Oyster, Shad, Gonjeng-ie, Hqangsegi, and Squid. All of them were ashed with 5$m\ell$ HNO$_3$ and then with 10$m\ell$ ternary solution (HNO$_3$ : H$_2$SO$_4$ : HClO$_4$= 10 : 1 : 4). After ashing of the samples, the aluminum amount were measured by ICP. The aluminum amount of molluscs was significantly higher than that of fishes and salt-fermented products(p＜0.01). The aluminum amount of Orient calm and Healak in molluscs were 827.70, 812.55ppm, respectively, which were the most amounts compared nth that of the other samples. But the aluminum amounts of Bartailed flathead and Sea bream, genuine In fishes were 0.98, 0.97ppm, respectively, which were the least amounts compared with that of other samples. This study was limited within 46 aquatic samples, therefore I hope there will be wider efforts to determine about auminum amount in broade range of aquatic foods for the prevention of Alzheimer's disease.

• Journal of Nutrition and Health
• /
• v.32 no.7
• /
• pp.802-811
• /
• 1999

The purposes of this study were to 1) examine the dietary patterns of fatty acids and the fatty acid composition in serum, 2) determine selenium (Se) concentrations, and 3) investigate how serum fatty acid compositon affects serum levels of Se in Korean elementary school children. The subjects consisted of 168 school children(82 boys & 86 girls) belonging to 1st through 6th grades, and their dietary assessment was evaluated. The serum fatty acid composition was analyzed by GLC, and the ICP/MS method was employed to measure serum Se concentration. Total average intake of PUFA, MUFA and SFA were 10.5g, 12.7g, 11.2g respectively. Total average dietary P/M/S ratio was 1.10/1.18/1.0. The average intake of $\omega$3 fatty acids and $\omega$6 fatty acids were 1.33g, 9.19g, respectively. The $\omega$6/$\omega$3ratio was 14.2 which is higher than the recommended range. In serum fatty acid composition, PUFA, MUFA, SFA were 40.6%, 28.1% and 31.6% respectively. The average $\omega$3 fatty acid composition was 3.80%, and the mean value of $\omega$6 series was 36.8%. The M/S ratio of girls was significantly higher than boy's in fatty acids intake and in serum composition. Mean Se concentration of total subjects was 416.7ug/l and it was significantly higher in the lower grades(1st-3rd)than in the upper grades(4th~6th, p<0.05). Although the mean serum Se concentration was negatively correlated with PUFA composition in total boys and girls, it was not significant. Serum Se concentration was negatively correlated with P/S ratio and C24:1 concentration(p<0.05). In addition, serum composition of $\omega$6 PUFA and C24:1 showed negative correlations with serum Se in only lower grades girl(1st~3rd), and further studies are needed to clarify in these phenomena. In conclusion, the mean serum Se concentration was significantly lower in upper grades (4th~6th)than in lower grades(1st~3rd) of elementary school children and was negatively correlated with P/S ratio of serum fatty acids. More detailed studies on relationship between Se and fatty acids are required.

• Journal of Korean Society for Atmospheric Environment
• /
• v.29 no.1
• /
• pp.97-104
• /
• 2013

Methyl alcohol is one of the basic intermediates in the chemical industry and is also being used as a fuel additive and as a clean burning fuel. In this study, conversion of carbon dioxide to methyl alcohol was investigated using catalytic chemical methods. Ceramic monoliths (M) with $400cell/in^2$ were used as catalyst supports. Monolith-supported CuO-ZnO catalysts were prepared by wash-coat method. The prepared catalysts were characterized by using ICP analysis, TEM images and XRD patterns. The catalytic activity for carbon dioxide hydrogenation to methyl alcohol was investigated using a flow-type reactor under various reaction temperature, pressure and contact time. In the preparation of monolith-supported CuO-ZnO catalysts by wash-coat method, proper concentration of precursors solution was 25.7% (w/v). The mixed crystal of CuO and ZnO was well supported on monolith. And it was known that more CuO component may be supported than ZnO component. Conversion of carbon dioxide was increased with increasing reaction temperature, but methyl alcohol selectivity was decreased. Optimum reaction temperature was about $250^{\circ}C$ under 20 atm because of the reverse water gas shift reaction. Maximum yield of methyl alcohol over CuO-ZnO/M catalyst was 5.1 mol% at $250^{\circ}C$ and 20 atm.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.37 no.11
• /
• pp.18-24
• /
• 2000

(Ba,Sr)$TiO_3$ thin films have attracted great interest as new dielectric materials of capacitors for ultra-large-scale integrated dynamic random access memories (ULSI-DRAMs) such as 1 Gbit or 4 Gbit. In this study, inductively coupled $BCl_3/Cl_2/Ar$ plasmas was used to etch (Ba,Sr)$TiO_3$ thin films. RF power/dc bias voltage=600 W/-250 V and chamber pressure was 10 mTorr. The $Cl_2/(Cl_2+Ar)$ was fixed at 0.2 the (Ba,Sr)$TiO_3$ thin films were etched adding $BCl_3$. The highest (Ba,Sr)$TiO_3$ etch rate is $480{\AA}/min$ at 10 % $BCl_3$ to $Cl_2/Ar$. The change of Cl, B radical density measured by optical emission spectroscopy(OES) as a function of $BCl_3$ percentage in $Cl_2/Ar$. The highest Cl radical density was shown at the addition of 10% $BCl_3$ to $Cl_2/Ar$. To study on the surface reaction of (Ba, Sr)$TiO_3$ thin films was investigated by XPS analysis. Ion bombardment etching is necessary to break Ba-O bond and to remove $BaCl_2$. There is a little chemical reaction between Sr and Cl, but Sr is removed by physical sputtering. There is a chemical reaction between Ti and Cl, and $TiCl_4$ is removed with ease. The cross-sectional of (Ba,Sr)$TiO_3$ thin film was investigated by scanning electron microscopy (SEM), the etch slope is about 65~70$^{\circ}$.

• Journal of Korean Society on Water Environment
• /
• v.33 no.4
• /
• pp.416-423
• /
• 2017

The subject samples include 150 and 170 samples collected from intake holes in the former and latter half of 2015, respectively. They were analyzed with ICP-MS. The average concentration of detected barium was $10.54{\mu}g/L$ ($0.23{\sim}168.22{\mu}g/L$) and $8.21{\mu}g/L$ ($0{\sim}255.65{\mu}g/L$) for the former and latter halves of 2015, respectively. The concentration distribution was the highest for the precambrian era at $19.07{\mu}g/L$ and the lowest Cenozoic era at $4.92{\mu}g/L$. The average value for sedimentary, metamorphic, and igneous rocks was $7.84{\mu}g/L$, $20.84{\mu}g/L$, and $9.47{\mu}g/L$, respectively, which indicates that it was the highest for metamorphic rocks. The study also analyzed correlations between barium and other minerals and found that magnesium recorded 0.44 and 0.71 for the former and latter half of 2015, respectively. As for barium concentration according to depth, it was relatively low in shallow groundwater (under 200 m) with its average concentration at $14.33{\mu}g/L$ and $14.71{\mu}g/L$ for the former and latter half of 2015, respectively. It was $8.53{\mu}g/L$ and $4.04{\mu}g/L$ in deep groundwater (over 200 m) for the two periods, respectively, The risk assessment results show that its average risk was HQ 0.00139 and HQ 0.00163 for the former and latter half of 2015, respectively, being considerably lower than "1", which suggests that barium poses few possibilities of consumption risk.

• Nutrition Research and Practice
• /
• v.10 no.6
• /
• pp.629-634
• /
• 2016

BACKGROUND/OBJECTIVE: The aim of this experiments was to show anti-obesity effects of Korean solar salt from different salt fields in diet-induced obese mice. MATERIALS/METHODS: Diet-induced obesity (DIO) was induced by a high-fat diet (HFD; 45% cal from fat) in C57BL/6J mice for eight weeks. The mice were fed with the designated diets (chow diet for Normal, HFD for Control, 0.47%-salt-mixed HFD for purified salt (PS), Guerande solar salt from France (SS-G), solar salt from Y salt field (SS-Y), solar salts from T salt field (SS-T) and S salt field (SS-S)) for another eight weeks. We checked body weight, food efficiency ratio (FER) and tissue weights (liver and epididymal adipose tissue (EAT)), and observed serum concentrations of triacylglycerol (TG), total cholesterol (TC), leptin and insulin. We also evaluated gene expressions of adipogenic / lipogenic mRNAs of $C/EBP{\alpha}$, $PPAR{\gamma}$ and FAS and beta-oxidation-related factors ($PPAR{\alpha}$ and CPT-1) in liver and EAT. The mineral composition of salt samples were analyzed using inductively coupled plasma optical emission spectrometry (ICP-OES). RESULTS: SS-T and SS-S significantly reduced body weight gain, FER, and weight of EAT compared to control and other samples (P < 0.05). SS-T and SS-S also significantly decreased serum levels of TG, TC, leptin and insulin (P < 0.05). SS-T and SS-S suppressed expressions of adipogenic / lipogenic mRNAs in liver and EAT, while promoting expression of beta-oxidation-related factors. The lowest sodium concentration was observed in SS-T ($30.30{\pm}0.59%$), and the lowest sodium-to-potassium (Na/K) ratio was found in SS-S (17.81). CONCLUSIONS: Our study shows that well-processed Korean solar salt may have anti-obesity effects in vivo, probably owing to its differences in mineral composition and other components, presumably resulting from the manufacturing processes. Further research is needed into the mechanism and to explore optimal manufacturing processes.

• Proceedings of the KWS Conference
• /
• 2009.11a
• /
• pp.75-75
• /
• 2009

연성회로기판은 일반적으로 절연체를 이루는 폴리이미드와 전도체를 이루는 구리로 구성되어 있다. 폴리이미드는 뛰어난 열적 화학적 안정성, 기계적 특성, 공정성 등의 장점으로 인해 연성회로기판의 절연체로서 제안되었지만 전도체를 이루는 구리와의 접합 특성이 우수하지 않기 때문에 많은 연구가 현재까지 진행되고 있고, 그 결과 연성회로기판의 접합 특성에 많은 개선이 이루어짐과 동시에 다양한 공정 방법이 제안되고 있다. 하지만 고온다습한 환경에서 사용될 경우 폴리이미드의 높은 흡습성과, 구리와 seed layer의 산화 문제로 인해 접합 특성이 저하된다는 단점 또한 가지고 있다. 따라서 본 연구를 통해 고온다습한 조건하에서 seed layer가 80Ni/20Cr 합금으로 구성된 연성회로기판의 seed layer의 두께와 시효시간으로 인해 발생하는 접합 신뢰성의 차이를 관찰하였다. 본 연구에서는 두께 $25{\mu}m$의 폴리이미드 위에 각각 100, 200, $300{\AA}$ 두께의 80Ni/20Cr의 합금 조성을 가지는 seed layer를 스퍼터링 공정을 통해 형성한 후 전해도금법을 이용하여 $8{\mu}m$ 두께의 구리 전도층을 형성하였다. 접합 특성 평가를 위해 ICP 규격에 따라 전도층 패턴을 폭 3.2mm, 길이 230mm로 시편을 제작하여 50.8mm/min의 이송 속도로 각 시편당 8회의 $90^{\circ}$ peel test를 실시하였다. 또한 $85^{\circ}C$/85% 항온항습 조건하에서 각각 24, 72, 120, 168시간 동안 시효 처리 후 같은 방법으로 연성회로기판의 접합 특성을 평가하였다. 파면의 형상과 조성을 분석하기 위해 SEM (Scanning electron microscope)과 EDS (Energy-dispersive X-ray spectroscopy)를 사용하였으며, 파면의 조도 측정을 위해 AFM (Atomic force microscope)을 사용하였다. 또한 파면의 잔여물 분석을 위해 EPMA (Energy probe microanalysis)를 사용하였고 계면의 화학적 결합상태를 분석하기 위해 XPS (X-ray photoelectron spectroscopy)를 통해 파면을 분석하였다.