• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2009.05a
• /
• pp.172-175
• /
• 2009

The purpose of this study is to predict the forming limit diagram (FLD) of strain-rate sensitive materials on the basis of the Marciniak and Kuczynski (M-K) theory. The strain-rate effect is taken into consideration in such a way that the stress-strain curves for various strain-rates are inputted into the formulation as point data, not as curve-fitted models such as power function. To solve the nonlinear system of equations derived from the equilibrium and constraints in the groove region and the safe zone, the Newton-Raphson method is used. The theoretical FLDs using four different yield criteria, that are von Mises, Hill (1948), Hill (1979), Logan and Hosford, are compared with the experimental, numerical (FEA) and other theoretical results. A new trial is made where a modified M-K model having n-step grooves is introduced to describe a real localized neck.

• Journal of the Korean Magnetics Society
• /
• v.23 no.5
• /
• pp.154-158
• /
• 2013

We have analyzed the magnetization curves measures by using VSM and MOKE in synthetic antiferromagnetic coupled CoB/Ru/CoB thin film. The measured results were compared with calculated ones by Stoner-Wohlfarth model based on the magnetization behavior of two ferromagnetic layers ($M_1$, $M_2$). The calculated total magnetization ($M_{tot}=M_1+M_2$) and single layer magnetization($M_1$) behaviors were compared with measured results by using VSM and MOKE, respectively. The total magnetization curve ($M_{tot}=M_1+M_2$) showed reversible magnetization behavior with flopping field of about 50 Oe. While single layer magnetization ($M_1$) behaviors showed irreversible magnetization behavior in the field range of $H_F$ < H < $H_F$. These magnetization behaviors were explained by the angle difference between magnetization directions of two ferromagnetic layers in SAF sample.

• Proceedings of the KSME Conference
• /
• 2003.04a
• /
• pp.131-136
• /
• 2003

CF8M cast austenitic stainless steel is used for several components such as primary coolant piping, elbow, pump casing, and valve bodies in light water reactors. These components are subject to thermal aging at the reactor operating temperature. Thermal aging results in spinodal decomposition of the delta-ferrite leading to increased strength and decreased toughness. In this study, three kinds of the aged CF8M specimen were prepared using an artificially simulated aging method. The objective of this study is to summarize the method of estimating ferrite contents, Charpy impact energy and J-R curve, and to evaluate the thermal embrittlement of the CF8M cast austenitic stainless steel piping used in the domestic nuclear power plants.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2004.05a
• /
• pp.148-151
• /
• 2004

Mechanical properties such as Young's modulus and hardness of thin film in coated steel are difficult to determine by nano-indentation from the conventional analysis using the load-displacement curve. Therefore, an analysis of the nano-indentation loading curve was used to determine the Young's modulus, hardness and strain hardening exponent. A new method is recently being developed for plasticity properties of materials from nano-indentation. Elastic modulus of the thin films shows relatively small influence whereas yield strength and strain hardening are found to have significant effect on measured data. The load-displacement behavior of material tested with a Berkovich indenter and nano-indentation continuous stiffness method is used to measure the modulus and hardness through thin films.

• Korean Journal of Computational Design and Engineering
• /
• v.3 no.2
• /
• pp.135-139
• /
• 1998

The hodograph, which are usually defined as the derivative of parametric curve or surface, is useful far various geometric operations. It is known that the hodographs of Bezier curves and surfaces can be represented in the closed form. However, the counterparts of rational Bezier curves and surface have not been discussed yet. In this paper, the equations are derived, which are the closed form of rational Bezier curves and surfaces. The hodograph of rational Bezier curves of degree n can be represented in another rational Bezier curve of degree 2n. The hodograph of a rational Hazier surface of degree m×n with respect to a parameter can be also represented in rational Bezier surface of degree 2m×2n. The control points and corresponding weight of the hodographs are directly computed using the control points and weights of the given rational curves or surfaces.

• Transactions of Materials Processing
• /
• v.13 no.8
• /
• pp.731-737
• /
• 2004

Mechanical properties such as Young's modulus and hardness of thin film in coated steel are difficult to determine by nano-indentation from the conventional analysis using the load-displacement curve. Therefore, an analysis of the nano-indentation loading-unloading curve was used to determine the Young's modulus, hardness. A new method is recently being developed for elastic-plastic properties of materials from nano-indentation. Elastic modulus of the thin films shows relatively small influence whereas yield strength is found to have significant effect on measured data. The load-displacement curves of material tested with a Berkovich indenter and nano-indentation continuous stiffness method is used to measure the modulus and hardness through thin films, and then these are computed using the analysis procedure. The developed neural networks apply also to obtain reliable mechanical properties.

• Journal of the Korean Chemical Society
• /
• v.51 no.1
• /
• pp.21-30
• /
• 2007

A multiwavelength spectrophotometric titration method was applied to study protolytic constants of four water-soluble vitamins, folic acid(vitamin B9 or B0), thiamine(vitamin B1), riboflavin(vitamin B2) and pyridoxal (vitamin B6) in binary ethanol-water mixtures at 25oC and an ionic strength of 0.1M NaNO3. The protolytic equilibrium constants, spectral profiles, concentration diagrams and also the number of components has been calculated from the curve fitting of the pH-absorbance data with appropriate mass balance equations by an established factor analysis model. DATAN program was used for determination of acidity constant and SPECFIT program was used for calculation of standard deviations and partial correlation coefficients. A glass electrode calibration procedure based on the four parameter equation pH=α+SpcH+JH+[H+]+ JOH-Kw/[H+] based on the Gran,s plots was used to obtain pH-readings in the concentration scale (pcH). The effect of the solvent on the protolytic constants was discussed.

• Journal of Astronomy and Space Sciences
• /
• v.2 no.1
• /
• pp.35-45
• /
• 1985

Standardized B and V photoelectric light curves of Algol are made with the obsevations obtained during 1982-84 with the 40-cm and the 61-cm reflectors of Yonsei University Observatory. These light curves show asymmetry between ascending and descending shoulders. The ascending shoulder is 0.02 mag brighter than descending shoulder in V light curve and 0.03mag in B light curve. These asymmetric light crves are interpreted as the result of inhomogeneous energy distribution on the surface of one star of the eclipsing pair rather than the result of gaseous stream flowing from KOIV to B8V star. The 180-year periodicity, so called great inequality, are most likely the result proposed by Kim et al.(1983) that the abrupt and discrete mass losses of cooler component may be the cause of this orbital change. The amount of mass loss deduced from these discrete period changes turned out to be of the order of $10^{-6}$ - $10^{-5}M_\odot$.

• Bulletin of the Korean Space Science Society
• /
• 2003.10a
• /
• pp.24-24
• /
• 2003

We present preliminary results about the quasi-simultaneous near-infrared light curves of the long-period eclipsing polar V1309 Ori in the J, H, K', and K bands with almost complete orbital phase coverage using the CFHT-IR camera. The optical light curve in the V and R bands, obtained by 1.8m Telescope at BOAO, will be also presented. The shape and the amplitude of the orbital light curve change significantly from optical to near-infrared wavelengths.

• Journal of The Korean Astronomical Society
• /
• v.43 no.3
• /
• pp.95-104
• /
• 2010

We outline our GRB afterglow observation program using the 1-m telescope at Mt. Lemmon Optical Astronomy Observatory (LOAO), and report the first observations of the GRB afterglows. During the 2007B semester, we performed follow-up imaging obsrevations of 6 GRBs, and succeeded in detecting four GRB afterglows (GRB 071010B, GRB 071018, GRB 071020, and GRB 071025) while placing useful upper limits on the light curves of the other GRBs. Among the observed events, we find that three events are special and interesting. GRB 071010B has a light curve which has an unusually long jet break time of 11.8 days. For GRB 071025, its red R-I(~2) color suggests that it is likely to be at z~5. GRB 071020 has a light curve which shows a clear brightening at 0.3-1 days after the burst, where our LOAO data play a crucial role by providing an unambiguous evidence for the brightening. These are the first successful detections of GRB afterglows by a facility owned and operated by a Korean institution, demonstrating the usefulness of the 1-m telescope for transient phenomena such as GRBs up to very high redshift.