• 제목/요약/키워드: M/T-method

검색결과 2,822건 처리시간 0.027초

Influence of Sample Preparation on Thermogravimetric Analysis of Poly(Ethylene-co-Vinyl Acetate)

  • Lee, Sang-jin;Choi, Sung-Seen
    • Elastomers and Composites
    • /
    • 제51권3호
    • /
    • pp.206-211
    • /
    • 2016
  • Experimental error sources for thermogravimetric analysis (TGA) of poly(ethylene-co-vinyl acetate) (EVA) were investigated and sample preparation method to reduce the experimental error was suggested. Maximum dissociation temperatures of EVA for the first and second dissociation reactions ($T_{m1}$ and $T_{m2}$, respectively) were measured. By decreasing the weight of raw EVA, the $T_{m1}$ increased but the the $T_{m2}$ decreased. When weight of the raw EVA was over 10 mg, the TGA curve showed abnormal behaviors. The abnormal TG behaviors were explained by gathering and instantaneous evaporation of acetic acid formed by deacetylation of the VA unit. When TGA analysis of EVA was performed using untreated (raw) EVA, the experimental errors were about 1%. In order to eliminate the abnormal TG behaviors and to reduce the experimental errors, EVA film made by solvent casting was used. For the treated EVA (EVA film), the abnormal TG behaviors did not appear, the $T_{m1}$ decreased by about $2^{\circ}C$ but the $T_{m2}$ increased by about $6^{\circ}C$, and the experimental errors were reduced by 0.5%.

삼항 다항식을 이용한 효율적인 비트-병렬 구조의 곱셈기 (Design of an Efficient Bit-Parallel Multiplier using Trinomials)

  • 정석원;이선옥;김창한
    • 정보보호학회논문지
    • /
    • 제13권5호
    • /
    • pp.179-187
    • /
    • 2003
  • 최근 빠른 하드웨어의 구현은 속도의 효율성을 중시하는 환경에서 큰 관심의 대상이 되고 있다. 유한체 연산기는 연산과정이 복잡한 곱셈 연산에 의해 속도가 결정된다. 연산 수행 속도를 빠르게 개선하기 위해 본 논문에서는 하드웨어 구조를 기존의 Mastrovito방법을 이용하여 제안하고자 한다. 삼항기약다항식(trinomial) p($\chi$)=$\chi$$^{m}$$\chi$$^n$+1를 이용하여 제안하는 곱셈기의 시간 복잡도를 기존의 복잡도 T$_{A}$+( (m-2)/(m-n) +1+ log$_2$(m) ) T$_{x}$에서 T$_{A}$+(1+ log$_2$(m-1)+ n/2 ) T$_{x}$으로 감소시킨다. 그러나 공간 복잡도를 살펴보면 AND 게이트 수가 기존의 복잡도와 m$^2$으로 같지만, XOR 게이트의 수는 기존 복잡도인 m$^2$-1에서 m$^2$+(n$^2$-3n)/2으로 기약다항식의 중간항 차수인 n에 따라 약간 증가된다. 기약다항식의 최고차 항을 표준에서 권장하는 차수와 그에 준하는 다항식의 차수에 대해 XOR 공간 복잡도가 평균적으로 1.18% 증가하는 데 비해, 시간 복잡도는 평균적으로 9.036% 정도 감소한다.

국내 중저심도(20~80m) 수직구에 적합한 Stage-Cut 공법 개발 (Development of Stage-Cut Method for medium depth Shaft in Korea)

  • 홍창수;이지수;황대진
    • 한국지반공학회:학술대회논문집
    • /
    • 한국지반공학회 2009년도 세계 도시지반공학 심포지엄
    • /
    • pp.1522-1529
    • /
    • 2009
  • When a shaft is excavated in Korea, the mechanized method such as RBM(Raise Boring Machine) or RC(Raise Climber) is used independently of depth. But usually, the mechanized method is useful for the deep depth. On the contrary, when the depth of shaft is short, the cost of excavation increase. So in the case of shaft constructon less than 100m, we need to consider more suitable method of shaft construction such as Stage-cut which is one of blasting methods. Stage-Cut is widely used in the field of shaft construction in Japan as a tool of rock excavation. The main purpose of this study is to provide technical guidance for design and construction of shafts in rock, using Stage-cut method which is suitable for 20m~80m depth shaft. In this study, Blasting tests was performed in field, according to rock classification. Finally, the stage-cut method which is suitable for the geology of Korea was developed.

  • PDF

ADDITIVE-QUADRATIC ρ-FUNCTIONAL INEQUALITIES IN FUZZY BANACH SPACES

  • LEE, SUNG JIN;SEO, JEONG PIL
    • 한국수학교육학회지시리즈B:순수및응용수학
    • /
    • 제23권2호
    • /
    • pp.163-179
    • /
    • 2016
  • Let $M_1f(x,y):=\frac{3}{4}f(x+y)-\frac{1}{4}f(-x-y)+\frac{1}{4}(x-y)+\frac{1}{4}f(y-x)-f(x)-f(y)$, $M_2f(x,y):=2f(\frac{x+y}{2})+f(\frac{x-y}{2})+f(\frac{y-x}{2})-f(x)-f(y)$ Using the direct method, we prove the Hyers-Ulam stability of the additive-quadratic ρ-functional inequalities (0.1) $N(M_1f(x,y)-{\rho}M_2f(x,y),t){\geq}\frac{t}{t+{\varphi}(x,y)}$ and (0.2) $N(M_2f(x,y)-{\rho}M_1f(x,y),t){\geq}\frac{t}{t+{\varphi}(x,y)}$ in fuzzy Banach spaces, where ρ is a fixed real number with ρ ≠ 1.

이중 광학식 회전 엔코더 구조를 이용한 고정밀도 엔코더 시스템 개발 (Development of a High-Resolution Encoder System Using Dual Optical Encoders)

  • 이세한
    • 한국정밀공학회지
    • /
    • 제24권9호
    • /
    • pp.76-85
    • /
    • 2007
  • An optical rotary encoder is easy to implement for automatic control applications. In particular, the output of the encoder has a digital form pulse, which is also easy to be connected to a popular digital controller. By using the encoder, there are various angular velocity detecting methods, M-, T-, and M/T-method. Each of them has a property of its own. They have common limitation that the angular velocity detection period is strongly subject to the destination velocity magnitude in case of ultimate low range. They have ultimate long detection period or cannot even detect angular velocity at near zero velocity. This paper proposes a dual encoder system with two encoders of normal resolution. The dual encoder system is able to keep detection period moderately at near zero velocity and even detects zero velocity within nominal period. It is useful for detecting velocity in case of changing rotational direction at which there occurs zero velocity. In this paper, various experimental results are shown for the dual encoder system validity.

공통인수 후처리 방식에 기반한 고속 유한체 곱셈기 (Fast GF(2m) Multiplier Architecture Based on Common Factor Post-Processing Method)

  • 문상국
    • 한국정보통신학회논문지
    • /
    • 제8권6호
    • /
    • pp.1188-1193
    • /
    • 2004
  • 비도 높은 암호용으로 연구된 유한체 곱셈 연산기는 크게 직렬 유한체 곱셈기, 배열 유한체 곱셈기, 하이브리드 유한체 곱셈기으로 분류되어 왔다. 직렬 유한체 곱셈기는 마스트로비토 (Mastrovito) (1)에 의하여 제안되어 유한체 곱셈기의 가장 기본적인 구조로 자리잡아 왔고, 이를 병렬로 처리하기 위해 m 배의 자원을 투자하여 m 배의 속도를 얻어낸 결과가 2차원 배열 유한체 곱셈기이며 (2), 이들 기존 방식의 장점만을 취하여 제안된 방식이 1999년 Paar에 의해 제안된 하이브리드 (hybrid) 곱셈기이다 (3). 반면 이 하이브리드 곱셈기는 사용 가능한 유한체로서 유한체의 차수를 합성수로 사용해야 한다는 제약이 따른다. 본 논문에서는 마스트로비토의 곱셈기의 구조를 기본으로 하고, 수식적으로 공통인수를 끌어내어 후처리하는 기법을 유도하여 적용한다. 제안한 방식으로 설계한 새로운 유한체 곱셈기는 HDL로 구현하여 소프트웨어 측면 뿐 아니라 하드웨어 측면에서도 그 기능과 성능을 검증하였다. 제안된 방식에서 직렬 다항 기준식 (polynomial)을 t (t는 1보다 큰 양의 정수) 부분으로 나누어 적용하였을 경우 곱셈기는 t 배의 속도 향상을 보일 수 있다.

Effect of Charcoal on Germination and Early Growth of Barley Sprouts

  • Salitxay, Timnoy;Kim, Yeon Bok;Chang, Kwang Jin;Kalam, Azad Obyedul;Cho, Dong Ha;Park, Cheol Ho
    • 한국자원식물학회:학술대회논문집
    • /
    • 한국자원식물학회 2018년도 추계학술대회
    • /
    • pp.133-133
    • /
    • 2018
  • The aim of this study was to evaluate the effect of charcoal on germination and early growth of barley sprouts. Five treatments were employed based on different amount and treatment method along with control. Barley seeds were soaked in water for 8 hours. Two types of topping treatment were applied such as, charcoal: 100 g (designated as T1) and charcoal: 200 g (T2). Three kinds of mixing treatment were as follows: barley seeds were mixed with 100g of charcoal (designated as M1), with 200g of charcoal (M2), and with 300g of charcoal(M3). The control did not have any charcoal. In our finding, germination rates were observed 53.3% (control), 26.3%(T1), 36.3%(T2), 67.3%(M1), 81.7%(M2), and 79.7%(M3) at three days after inoculation (DAI). Length of radicle was found at 0.90 cm (control), 0.88 cm (T1), 0.99 cm (T2), 1.03cm (M1), 1.66 cm (M2), and 0.70 cm (M3) in 3 DAI. In addition, sprout length was found 4.5 cm (control), 10.4 cm (T1), 11.9 cm (T2), 5.7 cm (M1), 6.3 cm (M2), and 2.1 cm (M3) in 14 DAI. Fresh weight of sprouts were 0.78g (control), 1.03g (T1), 1.07g (T2), 0.96g (M1), 1.07g (M2), and 0.95g (M3). Among the treatment, topping of seeds on 200g of charcoal (T2) showed longest sprout length and fresh weight. Mixing treatments showed higher germination rates and sprout fresh weight. The results may be attributed to difference in micro-climate conditions (mostly temperature and humidity) in the growth boxes in different treatments.

  • PDF

Renogram의 정량분석(定量分析)에 관(關)한 연구(硏究) (Quantitative Analysis of Renogram)

  • 최근출
    • 대한핵의학회지
    • /
    • 제3권1호
    • /
    • pp.19-32
    • /
    • 1969
  • Radioisotope renography was carried out in 564 cases consisting of 150 normal controls, 140 hypertensives, 102 hypertensive nephropathys, 62 chronic renal diseases, non-functioning kidneys. It was aimed to study which parameter of the renogram is most applicable to any definite disease of the kidney. The analytical methods adopted were; Tobe, Spencer, Krueger, Matchida and Takeuchi. In the non-functioning kidney groups, the hemograms and serum nitrogen series were also studied to evaluate the relationships between the renograms and renal anemia. The parameters were; time of maximum amplitude (Tmax), half-time of maximum amplitude ($T\frac{1}{2}$), Kac value calculated from these two parameters in Tobe's method, slopes of Band C phase, B/A and B/C values in Spencer's method, total concentration (T.C.), minute concentration (M.C.) and minute excretion (M.E.) in Krueger's method, Matchida's K value and Takeuchi's renal function Index (R.F.I.). Following were the results: 1. In general, marked differences in the patterns of the renogram were observed between the normal controls and nephropathys. In Tobe's method, each parameter showed statistically significant delay or decrease in patients with hypertensive nephropathys and chronic renal diseases. In Spencer's method, slopes of B and C phase and B/C, also showed the statistically significant decrease in patients with hypertension, hypertensive nephropathys and chronic renal diseases. In Krueger's method, M.C. and ME showed the statistically significant differences between the control and patients with hypertension, hypertensive nephropathys and chronic renal diseases, In Matchida's method, K value showed the statistically significant differences between the control and patients with hypertensive nephropathys and chronic renal diseases. 2. It appeared, therefore, that Tobe's $T\frac{1}{2}$, Kac value, Spencer's slopes of Band C phase, B/A, B/C values, Krueger's T.C., M.C., and M.E. values, Matchida's K value are useful for the differentiation of various renal diseases, however, qualitative analysis of the renogram with one or two parameters is not accurate. 3. In bilateral non-functioning kidney groups, a positive correlation between anemia and nitrogen retention was observed, although the quantitative assessment of the degree of non-functioning was impossible.

  • PDF

Redundant Digital System에서의 고장진단에 관한 연구 (On the Fault Diagnosis in a Redundant Digital System)

  • 김기섭;김정선
    • 한국통신학회논문지
    • /
    • 제9권2호
    • /
    • pp.70-76
    • /
    • 1984
  • 본 논문에서는 m개의 고장까지 극복할 수 있는 기능적 m-리던던트(Functional m-redundant)시스템을 그래프 이론에 바탕을 두고 정의하였다. 이 시스템은 리던던시를 효과적으로 이용하여 추가적인 테스트 기능없이 각 부시스템의 출력을 서로 비교함으로써 t(t$\geq$m)고장진단 가능하고 진단을 위한 시스템 정지가 필요없도록 설계되었다. 또한 이 시스템에 대한 진단 모델을 제시하였고 이 모델이 preparata의 진단 모델로 바뀌어질 수 있음을 보였으며 이를 이용하여 기능적 m-리던던트 시스템의 진단 특성을 Preparata에 의해 제시된 방법으로 해석하였다.

  • PDF

M&S 기반 함정음향 시험평가 개념 (A Concept on the M&S-based T&E for Ship Acoustics)

  • 조창봉
    • 한국군사과학기술학회지
    • /
    • 제7권1호
    • /
    • pp.24-33
    • /
    • 2004
  • Recently, ship acoustics takes more important role in acoustic stealth and classification of underwater targets. In this paper, a theoretical concept is proposed for M&S-based test and evaluation of ship acoustics. The concept is based on two different approaches: on Top-Down method which emphasizes the survivability of the ship and on Bottom-Up method which considers acoustic characteristics of the ship-equipments. In order to improve the effectiveness of M&S-based T&E for ship acoustics, it is recommended in this paper to compromise the two approaches as adequate.